GE® 30" Smart Built-In Self-Clean Convection Double Wall Oven with Never Scrub Racks

Dimensions And Installation Information

Note: Wall coverings, countertops, and cabinets surrounding the wall oven must be able to withstand a temperature of up to 200°F (94°C).

Note: If the cabinet in which the wall oven is installed does not have a solid bottom, two braces or runners must be installed to support the weight of the oven. The runners and braces must support up to 400 lbs (181 kg).

Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.

Attention Installer: Electric wall ovens are NOT approved for installation with a plug and receptacle. They must be hardwired into an approved junction box.

Important: Before installing, consult installation instructions packed with product for current dimensional data.

Electrical Specifications

Installation Diagrams and Requirements

Cabinet and Cutout Dimensions

The diagram illustrates the required cutout dimensions for the GE JTD5000 series double wall oven. Key measurements include:

• Cutout Width: Minimum 28 1/2 inches, Maximum 28 5/8 inches.
• Cutout Depth: Minimum 23 1/2 inches.
• Cutout Height: Minimum 50 1/4 inches (without pedestal), Minimum 51 13/16 inches, Maximum 51 15/16 inches (with pedestal).
• Recommended minimum cutout location from floor: 12 inches.
• The diagram also labels cabinet overlaps (A, B, C) and oven dimensions (D, E, F).

Support Bracing

For cabinets without a solid bottom, two braces or runners made from 2x4 lumber or equivalent must be installed. These must be level with the bottom of the cutout and flush with the sides, or installed on a solid bottom floor. They must support up to 400 lbs (181 kg).

Pedestal Rails Installation

The diagram shows pedestal rails being attached with screws. The flanges of the rails should face towards the center of the cutout, with the top cutout towards the front.

Installation Notes for Different Scenarios

30" Double electric wall ovens are approved for installation above 27" and 30" warming drawers.

If the new GE Appliances 30" double wall oven is being installed into new construction (i.e., not a replacement), then the recommended installation is to use the pedestal rails.

When To Use The Pedestal Rails: When replacing an older GE Appliances 30" double wall oven with a new GE Appliances model: Cutout Height = 51 13/16" to 51 15/16". This is our traditional cutout height.

When Not To Use The Pedestal Rails: When replacing a 30" double wall oven from another manufacturer (i.e., Whirlpool) with a new GE Appliances model: Cutout height = 50-1/4". You will need to verify that the existing cutout matches the 50-1/4" dimension.

Features And Benefits

• No Preheat Air Fry: Cook healthier, crispier versions of your favorite foods in less time, thanks to an air fryer right in your oven that doesn't require preheating. Optional air fry basket sold separately.
• True European Convection: Achieve faster and more even results with a convection fan and third heating element that circulates air for more efficient cooking.
• Anywhere Control with Remote Notifications: Save time by conveniently preheating and monitoring your oven from anywhere using the GE Appliances Kitchen app.
• Remote Temperature Probe: Internal probe allows monitoring of roasts and meats to assure they are thoroughly and accurately cooked without opening the oven door.
• Self-Clean with Optional Steam Clean: Cleaning the oven interior has never been easier, with two cleaning options to fit your lifestyle.
• Hidden Backlit LCD Control: Easily read and operate a bright display that shows the clock when not in use and illuminates controls when you're ready to cook.
• 10-Pass Hidden Bake Element: Even baking and quick cleanup are assured, with a 10-pass element that heats a large cooking area and is hidden for an easy-to-wipe surface.
• 8-Pass Broil Element: Get full broil coverage and even browning from edge to edge.

Available Models

• JTD5000DVBB - Black
• JTD5000EVES - Slate
• JTD5000SVSS - Stainless Steel

Fit Guarantee

Replacing a similar wall oven from GE Appliances or another brand? GE wall ovens are guaranteed for an exact fit or GE Appliances will pay up to $300 toward modifications. Visit geappliances.com for more info.

Contact Information

For answers to your Monogram, Café™, GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.