GE Profile™ 30" Smart Built-In Convection Double Wall Oven with Right-Hand Side-Swing Doors (PTD700RSN)

Dimensions and Installation Information (In Inches)

NOTE: Wall coverings, countertops, and cabinets surrounding the wall oven must be able to withstand a temperature of up to 200°F (94°C).

NOTE: If the cabinet in which the wall oven is installed does not have a solid bottom, two braces or runners must be installed to support the weight of the oven. The runners and braces must support up to 400 lbs (181 kg).

NOTE: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.

ATTENTION INSTALLER: Electric wall ovens are NOT approved for installation with a plug and receptacle. They must be hard wired into an approved junction box.

IMPORTANT: Before installing, consult installation instructions packed with product for current dimensional data.

Diagram Description: Overall Dimensions and Cutout

The primary installation diagram illustrates the oven's placement within a cabinet. Key dimensions are indicated:

• Overall Width: 30 inches.
• Cutout Width: Minimum 28-1/2 inches, Maximum 28-5/8 inches.
• Cutout Depth: Minimum 23-1/2 inches.
• Cutout Height: Minimum 50-1/4 inches without pedestal; Minimum 51-13/16 inches, Maximum 51-15/16 inches with pedestal.
• Door Swing Depth: Minimum 31-1/8 inches (77.8 cm).
• Conduit: Shown at 48 inches.
• Junction Box: May be located in an adjacent cabinet. The diagram shows 47 inches from the bottom of the junction box to the bottom of the cutout.
• Recommended Minimum Cutout Location from Floor: 12 inches.
• Labeled Dimensions:
  • A: Overlap of oven at top of cutout.
  • B: Overlap of oven on the other side of the edge of cutout.
  • C: Overlap of oven at bottom of cutout.
  • D: Install depth.
  • E: Overall height with trim.
  • F: Overall width.

Electrical Ratings

Cabinet and Oven Dimensions

Diagram Description: Bracing and Runners

A diagram illustrates the required bracing for cabinets without a solid bottom. It shows two 2x4 or equivalent runners that should be:

• Level with the bottom of the cutout.
• Flush with the sides of the cutout or placed on a solid bottom floor.
• Capable of supporting up to 400 lbs.

Installation Notes: Pedestal Rails

NOTE: 30" Double electric wall ovens are approved for installation above 27" and 30" warming drawers.

IMPORTANT: Before installing, consult installation instructions packed with ALL products for current dimensional and combination data.

When to Use the Pedestal Rails:

When replacing an older GE Appliances 30" double wall oven with a new GE Appliances model. The required Cutout Height is 51-13/16" to 51-15/16". This is the traditional cutout height.

When Not to Use the Pedestal Rails:

When replacing a 30" double wall oven from another manufacturer (e.g., Whirlpool) with a new GE Appliances model. The cutout height is typically 50-1/4". You will need to verify that the existing cutout matches the 50-1/4" dimension.

If the new GE Appliances 30" double wall oven is being installed into new construction (i.e., not a replacement), then the recommended installation is to use the pedestal rails.

Diagram Description: Pedestal Rail Installation

A diagram shows the pedestal rail installation, indicating:

• Attachment screws.
• Flanges toward the center of the cutout.
• The top cutout is oriented toward the front.

Features and Benefits

• Swing Door: An innovative door design that opens to the side instead of down, eliminating awkward reaching.
• Precision Cooking Modes*: Simplify the cooking process with precision cooking modes that automatically track progress and make time and temperature adjustments (upper oven).
• No Preheat Air Fry: Integrated hot air frying technology gives you crispy results in your oven without using oil (upper oven).
• No Preheat: Eliminate the need for preheating and save time with a variety of precision cooking modes.
• Built-In WiFi, Powered by SmartHQ App: Connect, control, and manage your oven from anywhere with your smartphone or tablet.
• GE Profile Connect +: Ensure your oven always has the latest features, like new Air Fry modes, with downloadable software updates.
• Full-Color Display: Easily navigate wall oven settings thanks to a 7" touchscreen display.
• True European Convection with Direct Air: This oven features True European Convection, an advanced convection system that uses a third heating element and reversing fan for the highest level of heat and air circulation.
• Easy-Glide, Never-Scrub Rack: This smooth-gliding oven rack can be left in the oven during the self-clean cycle so you never have to scrub.
• Temperature Probe: A precision temperature probe connects to the oven to ensure your food is properly cooked.
• Self-Clean with Steam Clean: This self-cleaning oven uses optional steam cleaning for light soils to clean the oven cavity with less heat and odor.
• Fit Guarantee: This oven will fit your existing cut-out, or GE Appliances will help pay for modifications up to $300.

Model: PTD700RSNSS - Stainless Steel

*Available once connected to WiFi.

Support and Information

For answers to your GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

Listed by Underwriters Laboratories.

Specification Revised 1/22.