TreatLife Smart Outdoor Plug
Product Outline
The TreatLife Smart Outdoor Plug is designed for convenient control of outdoor electrical devices. Key components include:
- ON/OFF Button: Mechanical button for manual control.
- LED Indicator: Shows the status of the plug.
- Attaching Plug: Connects to the power source.
- 7 inch Power Cable: Connects the plug to the device.
- AC Receptacle: Where the device is plugged in.
- Silicone Cover: Protects the AC receptacle.
Indicator Light Status
| Light Color | Light Status | Switch Status |
|---|---|---|
| Red | Blinking | Pairing mode |
| White | ON | Device is powered on |
| (No light) | OFF | Device is powered off |
Setup and Pairing
Preparation: Ensure the plug is connected to power and your phone is connected to your WiFi router (2.4GHz network only). If you are on a 5GHz network, please switch to a 2.4GHz network before proceeding.
3.1 Apple iOS System Pairing Method
- Press and hold the mechanical on/off button for 5 seconds until the red indicator light blinks.
- Open the TreatLife app and tap "Profile".
- Tap "HomeKit Information".
- Tap "Add HomeKit Device" (ensure the red LED indicator is blinking).
- Scan the QR code provided with the device.
Note: To control this HomeKit-enabled accessory automatically and away from home, you need an Apple TV, an iPad, or a HomePod set up as a home hub. The latest version of iOS is recommended.
3.2 Android System Pairing Method
- Press and hold the mechanical on/off button for 5 seconds until the red indicator light blinks.
- In the TreatLife app, tap "AP Mode" on the top right corner.
- Tap "Confirm indicator slowly blink".
- Enter your Wi-Fi password.
- Open your phone's WLAN settings and connect to the "TreatLife-XXX" network.
- Return to the TreatLife app and continue adding the device. Wait for the connection to complete.
Technical Specifications
Model: SK30H
Compatibility: Android 4.1 and above or iOS 13 and above
Max Output: 1800W
Max Current: 15A Total
