CASE SPECIFICATION
| Model No. | Precision 2 COC (MFG. T808) |
|---|---|
| Materials | Chassis 0.6/0.8mm SPCC, tempered glass on left side panel |
| Motherboard support | EATX (282*305mm), ATX, M-ATX, ITX |
| PSU type | ATX PSU (Bottom located) |
| TOP panel I/O ports | USB 3.0*1 + USB 2.0*2 + Type C*1, HD Audio |
| HDD bay | 3.5" HDD*2, 2.25" SSD*2 |
| Expansion Slots | 7 slots, Support up to 360mm (Max.) VGA card |
| CPU Cooler Height | 170mm |
| Fan Cooling | Front: 3*120/2*140mm Fans (Optional) Top: 2*120/140mm Fans (Optional) Rear: 1*120mm fan (Included) M/B Plate: 1x COC Turbo Fan (Included) |
| Liquid cooling | Front: 120/140/240/280mm water cooling Radiator Top: 120/140/240/280mm water cooling Radiator Rear: 120mm water cooling Radiator |
| Chassis size | (L)390 x (W)210 x (H)470mm |
| Case size | (L)443 x (W)210 x (H)493mm |
Case Views:
- Front: Depicts the front panel with I/O ports and ventilation.
- Top: Shows the top panel, typically for ventilation.
- Rear: Illustrates the rear panel with expansion slots, PSU opening, and fan mount.
- Left side: Features the tempered glass side panel.
- Right side: Shows the solid side panel.
CHASSIS BREAKDOWN DRAWINGS
The chassis is composed of the following parts:
- 1 Chassis
- 2 Front panel
- 3 Left tempered glass side panel
- 4 Right side panel
- 5 PSU cover
- 6 Dust-proof filter on bottom panel
- 7 Magnetic dust filter on the top
- 8 SSD bracket
- 9 Cable management box
- 10 Fan control board box
- 11 VGA card bracket
- 12 HDD bracket
- 13 COC turbo fan
- 14 1*120mm fan on the rear
- 15 Magnetic dust filter on the Right
- 16 Top panel
An exploded view diagram shows these components assembled, illustrating their relative positions within the chassis structure.
I/O PORTS INSTRUCTION
The front panel I/O ports are arranged as follows:
- 1 USB 2.0
- 2 USB 2.0
- 3 HDD LED
- 4 Microphone jack
- 5 Power SW (Power Switch)
- 6 Headphone jack
- 7 Reset SW (Reset Switch)
- 8 USB 3.0
- 9 Type C
SIDE PANEL INSTALLATION INSTRUCTION
To install or remove the side panel:
- Loosen the drop-proof screws labeled 'A'.
- Pull the side panel upwards in the direction indicated by the arrowhead [arrow].
TOP PANEL INSTALLATION INSTRUCTION
To install or remove the top panel:
- Loosen the screws labeled 'B'.
- Pull the top panel upwards in the direction indicated by the arrowhead [arrow].
POWER SUPPLY INSTALLATION
To install the Power Supply Unit (PSU):
- Remove the right side panel.
- Insert the PSU into its designated bay according to the arrowhead [arrow] direction.
- Fix the PSU in place using the provided screws [screw].
MOTHERBOARD INSTALLATION
To install the motherboard:
- Ensure the motherboard standoffs are correctly positioned. The manual notes pre-installed 6 motherboard screws in the factory setting. Motherboard compatibility includes ATX/E-ATX, Micro-ATX, and Mini-HTX.
- Place the motherboard onto the standoffs in the correct position, following the arrowhead [arrow] direction.
- Secure the motherboard by fixing the screws [screw].
