Remark:
- (a) There are the results on total Br while test items on restricted substances are PBBs and PBDEs. There is the result on total Cr while test item on restricted substances is Cr(VI).
- (b) Results are obtained by EDXRF for primary screening, and further chemical testing by ICP-OES (for Cd, Pb, Hg), UV-Vis (for Cr(VI)) and GC-MS (for PBBs, PBDEs) is recommended to be performed, if the concentration exceeds the below warning value according to IEC62321-3-1:2013 (unit: mg/kg).
Element
| Element |
Polymer |
Metal |
Composite Materials |
| Cd |
BL ≤(70-3σ)< X <(130+3σ)≤OL |
BL ≤(70-30)< X <(130+3σ)≤OL |
LOD < X <(150+30)≤ OL |
| Pb |
BL ≤(700-3σ)< Χ<(1300+3σ)≤ OL |
BL ≤(700-3σ)< X <(1300+3σ)≤ OL |
BL ≤(500-3σ)< X<(1500+3σ)≤ OL |
| Hg |
BL ≤(700-3σ)< X <(1300+3σ)≤ OL |
BL ≤(700-3σ)< X <(1300+3σ)≤ OL |
BL ≤(500-3σ)< X <(1500+3σ)≤ OL |
| Br |
BL ≤ (300-30)< Χ |
- |
BL ≤ (250-30)< Χ |
| Cr |
BL ≤ (700-30)< Χ |
BL ≤ (700-30)< Χ |
BL ≤ (500-3σ)< Χ |
(c) BL = Below Limit, OL = Over Limit, IN = Inconclusive, LOD = Limit of Detection, - = Not regulated.
(d) The XRF screening test for RoHS elements - The reading may be different to the actual content in the sample be of non-uniformity composition.
(2) Screening results of PHTH are for primary screening, and further chemical testing by GC-MS (for DBP, BBP, DEHP and DIBP) are recommended to be performed if the concentration exceeds the below warning value (unit: mg/kg)
| Compound |
Polymer |
| DBP |
BL ≤ 600< X |
| BBP |
BL ≤ 600< X |
| DEHP |
BL ≤ 600< X |
| DIBP |
BL ≤ 600< X |
(3) (a) mg/kg = 0.0001%, MDL=Method detection Limit, ND = Not Detected (<MDL), - = Not conducted, = Without BOM.
(b) Unit and MDL in wet chemical test
| Test Item |
Unit |
Pb |
Cd |
Hg |
DBP |
BBP |
DEHP |
DIBP |
| MDL |
10 |
10 |
10 |
100 |
100 |
100 |
100 |
The MDL for single compound of PBBs and PBDEs is 100 mg/kg,
MDL of Cr(VI) for polymer, composite and leather sample is 10 mg/kg,
MDL of Cr(VI) for metal sample is 0.10µg/cm².
(c) =Metal sample
a. The sample is positive for CrVI if the CrVI concentration is greater than 0.13 µg/cm².
The sample coating is considered to contain CrVI
b. The sample is negative for CrVI if CrVI is ND (concentration less than 0.10 µg/cm²).
The coating is considered a non-CrVI based coating
c. The result between 0.10 µg/cm² and 0.13 µg/cm² is considered to be inconclusive
unavoidable coating variations may influence the determination
Information on storage conditions and production date of the tested sample is unavailable
and thus Cr(VI) results represent status of the sample at the time of testing.
IEC 62321 series is equivalent to EN 62321 series
http://www.cenelec.eu/dyn/www/f?p=104:30:1742232870351101::::FSP_ORG_ID,FSP_LANG_ID:1258637,25
(4)=According to the declaration from the client, Lead (Pb) in No.17 is exempted by EU RoHS directive
2011/65/EU based on |ANNEX III 6(c)|: Copper alloy containing up to 4% lead by weight.
(5) According to the declaration from applicant, the materials in Models as below are the same as
those in Model "AC/DC Axial Fan". The applicant will take the responsibility of all discrepancy
and risk.
AC-RBF1-W, AC-RBF1-B, AC-RBF2-W, AC-RBF2-B, AC-RBF3-W, AC-RBF3-B,
AC-RBF12-W, AC-RBF12-B, AC-RBF22-W, AC-RBF22-B, AC-RBF32-W, AC-RBF32-B,
AC-RBF4-W, AC-RBF4-B, AC-RBF42-W, AC-RBF42-B, AC-RBF6-W, AC-RBF6-B,
AC-RBF62-W, AC-RBF62-B, AC-RBF8-W, AC-RBF8-B, AC-RBF9-W, AC-RBF9-B,
AC-RBF82-W, AC-RBF82-B, AC-RBF92-W, AC-RBF92-B, AC-ATT1, AC-ATT2, AC-ATT3,
AC-ATT4, AC-ATT5, AC-ATT6, AC-ATT7, AC-ATT8, AC-ATT9, AC-ATT10, AC-ATT1-N,
AC-ATT2-N, AC-ATT3-N, AC-ATT4-N, AC-ATT5-N, AC-ATT6-N, AC-ATT7-N, AC-ATT8-N,
AC-ATT9-N, AC-ATT10-N, AC-AFT1-BE, AC-AFT1-BN, AC-AFT1-WE, AC-AFT1-WN,
AC-AFT2-BE, AC-AFT2-BN, AC-AFT2-WE, AC-AFT2-WN, AC-AFT3-BE, AC-AFT3-BN,
AC-AFT3-WE, AC-AFT3-WN, AC-AFT5-BE, AC-AFT5-BN, AC-AFT5-WE, AC-AFT5-WN,
AC-AFT7-BE, AC-AFT7-BN, AC-AFT7-WE, AC-AFT7-WN, AC-AFT9-BE, AC-AFT9-BN,
AC-AFT9-WE, AC-AFT9-WN AI-CPT1, AI-CPT1-N, AI-CPT3, AI-CPT3-N, AI-CPT4,
AI-CPT4-N, AI-CPT6, AI-CPT6-N, AI-CPT7, AI-CPT7-N, AI-CP2L, AI-CP2H, AI-CPT8,
AI-CPT8-N, AI-CPT9, AI-CPT9-N, AI-CPT2, AI-CPT5, AI-CPT6, AI-CPT10, AI-CPT10-N,
AI-CPT12, AI-CPT12-N, AC-RRF7, AI-CTB12, AI-CFS80BA, AI-CFD80BA, AI-CFS120BA,
AI-CFD120BA, AI-APS1, AI-APS2, AI-APS3, AI-APS4, AI-APS5, AI-APS6, AI-APS7,
AI-APS8, AI-APS9, AI-APS10, AI-APS1-N, AI-APS2-N, AI-APS3-N, AI-APS4-N, AI-APS5-N,
AI-APS6-N, AI-APS7-N, AI-APS8-N, AI-APS9-N, AI-APS10-N, AI-APT3, AI-APT7, AI-APT9,
AI-APT8, AI-APT8-W, AI-ATC, AI-TCD4, AC-ATC1, AC-ATC2, AC-ATC3, AC-ATC4,
AC-ATC5, AC-ATC6, AC-ATC7, AC-ATC8, AC-ATX1, AC-AX2, AC-ATX3, AC-ATX4,
AC-ATX5, AC-ATX6, AC-ATX7, AC-ATX8, AI-MPF40A, AI-MPF40P, AI-MPF60P,
AI-MPF60A, AI-MPF80A, AI-MPF80A2, AI-MPF120A, AI-MPF80P, AI-MPF80P2,
AI-MPF140P, AI-MPF140P2, AI-MPB140P, AI-MPB140P2, AI-MPF120A2, AI-MPF140A,
AI-MPB140A, AI-MPB140A2, AI-MPF120P, AI-MPF120P2 AI-CLS3, AI-CLT3, AI-CLB3,
AI-CLX3, AI-CLS4, AI-CLT4, AI-CLB4, AI-CLX4, AI-CLS5, AI-CLT5, AI-CLB5, AI-CLX5,
AI-CLT6, AI-CLS6, AI-CLB6, AI-CLX6, AI-CLT8, AI-CLS8, AI-CLB8, AI-CLX8, AI-CLT10,
AI-CLS10, AI-CLB10, AI-CLX10, AI-CLT12, AI-CLS12, AI-CLB12, AI-CLX12, AI-CLT14,
AI-CLS14, AI-CLB14, AI-CLX14 AC-FBA4, AC-FBA6, AC-FBA8, AC-FBA10, AC-FBA12,
AC-FBA14, AC-FBA16, AC-FBA18, AC-FBA20, AC-FBA4-2, AC-FBA6-2, AC-FBA8-2,
AC-FBA10-2, AC-FBA12-2, AC-FBA14-2, AC-FBA16-2, AC-FBA18-2, AC-FBA20-2,
AC-FBB4, AC-FBB6, AC-FBB8, AC-FBB10, AC-FBB12, AC-FBB14, AC-FBB16,
AC-FBB18, AC-FBB20, AC-FBX4, AC-FBX6, AC-FBX8, AC-FBX10, AC-FBX12,
AC-FBX14, AC-FBX16, AC-FBX18, AC-FBX20, AC-ACS1, AC-ACT1, AC-ACX1,
AC-ACS2, AC-ACT2, AC-ACX2, AC-ACS3, AC-ACT3, AC-ACX3, AC-ACS4,
AC-ACT4, AC-ACX4, AC-ACS5, AC-ACT5, AC-ACX5, AI-ACS6, AI-ACT6, AC-ACX6,
AI-ACS7, AI-ACT7, AC-ACX7, AI-ACS8, AI-ACT8, AC-ACX8, AI-ACS9, AI-ACT9,
AC-ACX9, AC-ACS10, AC-ACT10, AC-ACX10, AC-ACS11, AC-ACT11, AC-ACX11,
AC-ACS12, AC-ACT12, AC-ACX12
