CLOUDLIFT WALL AND FLOOR CIRCULATOR FAN
USER MANUAL
AC INFINITY
WELCOME
Thank you for choosing AC Infinity. AC Infinity is committed to product quality and friendly customer service. For any questions or suggestions, please contact AC Infinity. Visit www.acinfinity.com and click contact for contact information.
EMAIL: support@acinfinity.com
WEB: www.acinfinity.com
LOCATION: Los Angeles, CA
PRODUCT INFORMATION
MANUAL CODE: CL2107X1
| PRODUCT | MODEL | UPC-A |
|---|---|---|
| CLOUDLIFT S12 | AC-WFS12 | 819137022263 |
| CLOUDLIFT S14 | AC-WFS14 | 819137022430 |
| CLOUDLIFT S20 | AC-WFS20 | 819137022485 |
| CLOUDLIFT S24 | AC-WFS24 | 819137022492 |
⚠️ Power this fan OFF before unplugging it. Do NOT place this fan near open bodies of water.
MANUAL INDEX
- Manual Index - Page 5
- Key Features - Page 7
- Product Contents - Page 8
- Installation - Page 9
- Powering and Setup - Page 12
- Programming - Page 14
- Other AC Infinity Products - Page 15
- Warranty - Page 16
KEY FEATURES
EC MOTOR
Next generation motor runs quieter, is more energy efficient, and has a longer lifespan than AC motors.
RUGGED BUILD
Black powdercoated steel fan guard supported by a rigid floor stand cages the fan blades for long-lasting performance.
WIDER COVERAGE
Pivoting fan head on the floor or wall-mounted creates dynamic circulation to direct airflow in a wide range.
IP-44 PROTECTION
This industrial wall fan is sealed to Ingress Protection 44 standards, rated with high resistance to liquids and dust.
DUAL BALL BEARINGS
The motor contains ball bearings with an estimated 67,000 hour lifespan. Enables the fan to be mounted in any direction.
SPEED CONTROLLER
Single button controller with circular dot display wirelessly enables fan speed control in ten speeds.
PRODUCT CONTENTS
- Industrial Wall Fan (x1)
- Wireless Controller (x1)
- Wireless Receiver (x1)
- AAA Batteries (x2)
- Wall-Hang Bracket (x1)
- Wood Screws (Wall Hang) (x2)
- Wall Anchor (x2)
- Wire Ties (x1)
- Controller Screw Set (x2)
INSTALLATION
MOUNTING
STEP 1
Mark the drilling holes in your chosen mounting location using the wall-hang bracket. Ensure your chosen mounting location is structurally sound and free of obstruction.
[Diagram: Hand holding a wall-hang bracket against a wall, marking drilling points.]
STEP 2
Drill the two holes into your marked locations and apply the wall anchors.
[Diagram: Two wall anchors being inserted into drilled holes, with a hammer nearby.]
STEP 3
Replace the bracket and drill the screws into your wall to secure it.
[Diagram: Hand securing the wall-hang bracket to the wall with screws.]
STEP 4
Pull the stand vertically and hook the fan onto the bracket.
[Diagram: Fan being lifted by its stand and hooked onto the mounted wall bracket.]
STEP 5
As an option, install wall hang screws to mount your controller and receiver. Drill holes into your marked location and apply the wall anchors.
[Diagram: Screws, hammer, and wall anchors, similar to Step 2, indicating optional mounting for controller/receiver.]
STEP 6
Apply the screws into the wall anchors. Hang your controller and receiver by the hole located behind each module.
[Diagram: Wireless controller and receiver being hung on wall anchors via their mounting holes.]
POWERING AND SETUP
STEP 1
Plug the fan's UIS™ cable into the receiver. You may magnetically mount the receiver in the controller slot.
[Diagram: Fan's UIS™ cable connecting to the receiver, and the receiver being placed into a controller slot.]
STEP 2
Insert the two AAA batteries into the wireless controller.
[Diagram: Two AAA batteries being inserted into the wireless controller.]
STEP 3
Adjust the sliders on the controller and receiver so their numbers match. Close the battery door when finished. The receiver's indicator light will flash when connected.
Any number of devices may be controlled using the same controller, as long as the fans' sliders match the controller's. Any number of controllers may control the same device, as long as the controllers' sliders match the fan's.
[Diagram: Close-up of controller and receiver sliders being set to match numbers, and indicator lights.]
STEP 4
Plug the fan's power cord into an AC power outlet to power the fan.
[Diagram: Fan's power cord being plugged into a wall AC power outlet.]
PROGRAMMING
LIGHT INDICATOR
Features ten LED lights to signify the current level. The LEDs will briefly light up before shutting off. Pressing the button will light up the LEDs.
ON
Press the button to turn your device on at level 1. Continue pressing to cycle through the ten device levels.
OFF
Hold the button to turn your device off. Press it again to return the device level back to the last setting. Pressing the button after speed 10 will also turn your device off.
[Diagram: Wireless controller showing a circular arrangement of ten LED lights and a central button.]
AC INFINITY PRODUCTS
Inline Fans
The CLOUDLINE series is a line of duct fans designed to quietly ventilate AV rooms and closets, as well as various DIY air circulation and exhaust projects. Features a thermal controller with intelligent programming that will automatically adjust duct fan speeds in response to changing temperatures.
[Diagram: AC Infinity inline duct fan with controller.]
Ducting Tubes
The four-layer ducting tube is used to direct airflow, designed for ventilation systems in applications like HVAC, dryers, and grow rooms. It is highly durable and flexible, and can be used anywhere from tight spaces to wide open areas.
[Diagram: AC Infinity flexible ducting tube.]
Shutter Fans
The AIRLIFT series is a line of shutter exhaust fans designed to expel heat, moisture, odor, and dust from spaces like greenhouses, garages, attics, and sheds. It features an intelligent controller that includes temperature and humidity programming, adjustable fan speed controls, a timer, and an alarm system.
[Diagram: AC Infinity AIRLIFT shutter exhaust fan.]
Crawlspace Fans
The AIRTITAN is a line of weather-proof fans designed to provide ventilation, as well as odor and moisture control for crawl spaces and basements.
[Diagram: AC Infinity AIRTITAN crawlspace fan.]
Discover the latest innovations in cooling and ventilation at acinfinity.com.
WARRANTY
This warranty program is AC Infinity's commitment to the customer. The product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, AC Infinity will take appropriate actions defined in this warranty to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any products sold by AC Infinity or its authorized dealerships. The program covers products that have become defective, malfunctioned, or are expressively unusable. The warranty program goes into effect on the date of purchase and expires two years from the date of purchase. If your product becomes defective during that period, AC Infinity will replace your product with a new one or issue a full refund.
The warranty program does not cover abuse or misuse. This includes physical damage, submersion of the product in water, incorrect installation (such as wrong voltage input), and misuse for any reason other than intended purposes. AC Infinity is not responsible for consequential loss or incidental damages of any nature caused by the product. Damage from normal wear, such as scratches and dings, is not covered.
To initiate a product warranty claim, please contact AC Infinity's customer service team at support@acinfinity.com.
[Icon: A circular badge with "100% GUARANTEE".] If you have any issues with this product, contact AC Infinity and they will happily resolve your problem or issue a full refund!
COPYRIGHT © 2021 AC INFINITY INC. ALL RIGHTS RESERVED. No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc.
