Omron HEM-7142T1-1 Automatic Blood Pressure Monitor

Introduction

Thank you for purchasing the OMRON Automatic Blood Pressure Monitor, model HEM-7142T1-1. This device is designed for home use to measure blood pressure and pulse rate using the oscillometric method. The monitor detects blood movement through the brachial artery and converts these movements into a digital reading. Please read and understand all instructions in this manual for safe and proper use.

Key Features

• Automatic Blood Pressure Monitor
• Upper Arm Measurement
• Oscillometric Method
• Includes arm cuff, batteries, and manual

Safety Instructions

To ensure the safe and proper use of this monitor, it is essential to read and understand all safety instructions provided. Follow all warnings and precautions.

General Precautions:

• Do not use the device for purposes other than measuring blood pressure.
• Consult a physician before using the device if you have medical conditions such as arrhythmias, diabetes, or vascular issues.
• Ensure the correct cuff size is used for accurate readings.
• Keep the device away from children.

How to Use

This section provides general guidance on operating the Omron HEM-7142T1-1. Specific steps may vary based on the detailed manual content.

Preparing for Measurement

Ensure you are in a relaxed state. Sit comfortably with your back supported and feet flat on the floor. Avoid talking or moving during measurement.

Applying the Arm Cuff

[Diagram Description: Illustration showing the correct way to wrap the arm cuff around the upper arm.]

Wrap the cuff snugly around your upper arm, approximately 1-2 cm above the elbow. Ensure the air tube is positioned correctly.

Taking a Measurement

[Diagram Description: Image showing the user seated correctly, with the cuff applied and the monitor ready.]

Press the Start/Stop button. The monitor will inflate the cuff and then deflate it slowly, taking the measurement.

Reading the Display

[Diagram Description: Illustration of the monitor's display showing systolic pressure, diastolic pressure, and pulse rate.]

The display will show the systolic pressure, diastolic pressure, and pulse rate. Refer to the full manual for understanding specific readings and indicators.

Maintenance

Keep the monitor clean and in good condition. Refer to the full manual for detailed maintenance procedures.

• Clean the exterior with a soft, dry cloth.
• Do not use abrasive cleaners or immerse the unit in water.
• Store the monitor in a cool, dry place.

Optional Accessories

Omron Healthcare may offer optional accessories such as different sized arm cuffs or AC adapters. Please consult the full manual or Omron Healthcare for availability.