DeLonghi ECAM 21.xxx/22.xxx Service: Test Modes and Procedures
Component Test Mode
To start the component test mode, press and hold the '2 Cups Coffee Button' and the 'Steam Button', then plug in the power cord. Release the buttons when the LEDs turn off. The test mode is now active.
| Button(s) Pressed | Component/Indicator | Function |
|---|---|---|
| ☕☕ + ? | N/A | To start the test mode, press and hold the '2 Cups Coffee Button' and the 'Steam Button', then plug in the power cord. Release the buttons when the LEDs turn off. The test mode is now active. |
| ? (On/Off Button) | Heating ♨️ | The heating is activated as long as the 'On/Off Button' is pressed. |
| ? (Steam Button) | Pump ? | The pump is activated as long as the 'Steam Button' is pressed. When the drive is at the bottom, water flows through the milk frother. When the drive is at the top (2-Cups LED ☕☕ lit), water flows through the coffee spout. |
| ⚙️ (Rinse Button) | Grinder ⚙️ | The grinder is activated as long as the 'Rinse Button' is pressed. |
| ⬆️ + ☕ (1-Cup Coffee Button) | Brew Group Drive | When pressing the '1-Cup Coffee Button', the brew group drive moves up or down. The drive stops when it reaches the limit switches. |
| When the upper limit switch is reached, the 2-Espresso LED lights up. | ||
| When the lower limit switch is reached, the 2-Cups Coffee LED lights up. | ||
| ? (Remove Water Tank) | N/A | Warning symbol ⚠️ lights up. |
| ?️ (Remove Grounds Drawer) | N/A | Grounds container symbol lights up. |
For necessary spare parts for your coffee machine repair, visit: https://komtra.de/delonghi-ersatzteile.html
LED Test / Reset
LED Test Mode
To start the LED test mode, press and hold the '1 Coffee Button' and the '2 Coffee Button', then plug in the power cord. Release the buttons when the LEDs blink. The test mode is now active.
| Button(s) Pressed | LED | Function |
|---|---|---|
| ☕ (1 Espresso Button) | Espresso LED | The Espresso LED lights up. |
| ☕☕ (2 Espresso Button) | Espresso LED | The Espresso LED blinks. |
| ☕ (1 Coffee Button) | Coffee LED | The Coffee LED lights up. |
| ☕☕ (2 Coffee Button) | Coffee LED | The Coffee LED blinks. |
| ⚙️ (Rinse Button) | Rinse LED | The Rinse LED lights up. |
| ? (Steam Button) | Steam LED | The Steam LED lights up. |
| ⚠️ (Alarm LEDs) + ? (Rotary Dial) | N/A | The Alarm LEDs light up according to the position of the rotary dial for coffee strength. |
Reset Procedure
To perform a machine reset, press and hold the 'On/Off Button' and the '1 Espresso Button', then plug in the power cord. Release the buttons when the coffee LEDs blink.
| Button(s) Pressed | LED | Function |
|---|---|---|
| ? (On/Off Button) + ☕ (1 Espresso Button) | N/A | To perform a machine reset, press and hold the 'On/Off Button' and the '1 Espresso Button', then plug in the power cord. Release the buttons when the coffee LEDs blink. |
For necessary spare parts for your coffee machine repair, visit: https://komtra.de/delonghi-ersatzteile.html
Usage Retrieval (Bezüge-Abruf)
To enter the statistics mode:
- Turn on the rear On/Off switch.
- Unplug the power cord.
- Press and hold the 'Steam Button' and the 'On/Off Button'.
- Plug the power cord back in.
- Wait until the LEDs blink, then release the buttons.
| Button(s) Pressed | Function |
|---|---|
| ☕ (1 Small Coffee Button) | Press and hold the '1 Small Coffee Button'. The LEDs will start blinking sequentially from right to left. |
| ⚙️ (Rinse Button) | Press and hold the 'Rinse Button'. The LEDs will start blinking sequentially from right to left. |
| ? (Steam Button) | Press and hold the 'Steam Button'. The LEDs will start blinking sequentially from right to left. |
| ⚠️ x 1 | Count how many times the LED blinks. If it does not blink, it means zero. For example, 4 blinks = 4. |
| ⚠️ x 10 | Count how many times the LED blinks. If it does not blink, it means zero. For example, 2 blinks = 2. |
| ⚠️ x 100 | Count how many times the LED blinks. If it does not blink, it means zero. For example, 6 blinks = 6. |
| ? (ECO Button) x 1000 | Count how many times the LED blinks. If it does not blink, it means zero. For example, no blink = 4. |
Based on the example above, 4624 uses would be indicated.
For necessary spare parts for your coffee machine repair, visit: https://komtra.de/delonghi-ersatzteile.html
Disclaimers and Company Information
Liability Exclusion
Errors and omissions excepted. No liability is assumed for any damages that may arise from our service booklet.
Copyright
Further distribution or reproduction of the offered data and information in other electronic or printed media is strictly prohibited and will be legally prosecuted. Any distribution or publication requires the written consent of the publisher. Every user accepts and respects all copyrights of the publisher. Reproduction or use of graphics, audio documents, video sequences, and texts in other electronic or printed publications is not permitted without the written consent of the publisher.
Trademark Law
Names and trademarks, especially protected ones, have generally not been marked as such. This lack of marking does not mean that they are free names in the sense of trademark law.
Important! The machine must be disconnected from the electrical network before opening! (Unplug the power cord!) Remove the water tank, empty the bean hopper as much as possible (preferably with a vacuum cleaner).
© KOMTRA GmbH
Further distribution and reproduction of this publication or parts thereof, for whatever purpose and in whatever form, are not permitted without the express written consent of KOMTRA GmbH.
KOMTRA GmbH, Löffelholzstraße 20 G9, D - 90441 Nürnberg, Tax Number: 241 130 60774, Central Nuremberg Tax Office, Managing Director: PERIC Milkica, HRB 19633 - Nuremberg District Court
Tel. 0911/148782-0 - Fax. 0911/148782-99 - https://komtra.de
