Bosch CleanAir Recirculation Kit DWZ2IT1I4 Installation Instructions

General Instructions

Read these instructions carefully.

Keep the instructions, as well as the manufacturer's information, for future use or for handover to the next owner.

Only with regular installation according to the installation instructions is the safety during use guaranteed. The installer is responsible for flawless operation at the installation site.

These instructions are intended for the installer of the special accessory.

The appliance connection must only be made by qualified and authorized personnel.

Before carrying out any work, disconnect the power supply.

Safe Installation

Follow the safety instructions for installing the special accessory.

WARNING – Risk of suffocation!

Children can become entangled in the packaging or pull it over their heads, suffocating.

• Do not leave children near the packaging.
• Do not let children play with the packaging material.

WARNING – Risk of injury!

The components inside the appliance may have sharp edges.

• Wear protective gloves.

Package Contents

After unpacking, check that the delivery is complete and that all parts show no damage from transport.

Refer to Fig. 1, Fig. 2.

Installing the Recirculation Deflector

1. Fix the hose with the clamp to the air nozzle. (Refer to Fig. 3)
2. Fix the hose to the recirculation deflector.
3. Stretch the hose and shorten it if necessary.
4. Screw the recirculation deflector firmly to the suspended cabinet.

Odor Elimination Filter for Recirculation Mode

In recirculation mode, the odor filters capture substances with unpleasant odors. Regular replacement of the odor filters ensures a high degree of odor elimination.

Under normal operation, approximately one hour per day, the odor filter should be replaced every 6 months. The odor filter cannot be cleaned or regenerated.

Replacing the Odor Elimination Filter

1. Remove the grease filters. For information on removing the grease filters, consult the operating instructions for your appliance.
2. Note: When installing the odor elimination filter, ensure that it does not arch upwards. Insert the odor elimination filter, push it towards the back, and fold it upwards. (Refer to Fig. 4). The spongy material must compress when inserted. When installing the odor elimination filter, ensure that the air direction arrows point upwards. (Refer to Fig. 5, Fig. 6, Fig. 7). If the odor elimination filter remains firmly in the appliance, it is installed correctly.
3. Install the grease filters. For information on installing the grease filters, consult the operating instructions for your appliance.
4. Dispose of the old odor elimination filter with household waste. The odor elimination filter does not contain toxic substances.