HeimVision A80S Smart Wake-Up Light User Manual

WARNING

To reduce the risk of Fire, Electric Shock, or Injury to Persons:

1. This appliance is only intended for household use, including similar use in hotels.
2. Place this appliance on a stable, level and non-slippery surface.
3. Do not use this appliance in wet surroundings (e.g. in the bathroom or near a shower or swimming pool.)
4. Make sure the adapter does not get wet.
5. Do not let water run into the appliance or spill water onto the appliance.
6. Only use the original adapter. Do not use the other adapter if they are damaged.
7. This appliance has no on/off switch. To disconnect the appliance from the power source, remove the plug from the wall outlet.
8. Do not use this appliance as a means to reduce your hours of sleep. The purpose of this appliance is to help you wake up more easily. It does not diminish your need for sleep.

STORAGE

1. Clean the appliance with a soft cloth.
2. Do not use abrasive cleaning agents, pads or cleaning solvents like alcohol, acetone, etc., as this might damage the surface of the appliance.
3. If the appliance will not be used for an extended period of time, remove the power cord from the wall outlet and store the appliance in a safe, dry surroundings where it will not be crushed, banged, or subject to damage.

OVERVIEW

The HeimVision A80S is a smart wake-up light designed to simulate sunrise and assist with waking up. It features a circular design with a digital display in the center.

Device Components:

• 1. Alarm Clock 2
• 2. Alarm Clock 1
• 3. Down Button
• 4. LED Light
• 5. Up Button
• 6. Snooze Button
• 7. Volume +
• 8. Radio
• 9. Volume -
• 10. Sleep Timer
• 11. Setting Button
• 12. USB Output
• 13. Antenna
• 14. Micro USB Input
• 15. Speaker
• 16. Button Battery (located in the base)

OPERATION GUIDE: Set the time

First use - setting the clock time: You have to set the clock time when you plug in the appliance for the first time.

1. Plug in the power and start setting.
2. Hold the [Setting Button] for 3 seconds until the hour time begins to blink.
3. Use the [Up Button] / [Down Button] to adjust the hour.
4. Press the [Setting Button] again to confirm the hour time and move to the minutes.
5. Use the [Up Button] / [Down Button] to adjust the minutes.
6. Press the [Setting Button] once more to confirm the minutes and move to choose the time format (12-hour or 24-hour).

Note: When the 12-hour time format is selected, PM or AM will be displayed.

Setting Alarm Clock

You can set four alarm clocks for this wake-up light. (Note: clock 3 & clock 4 can only be set on APP)

Take clock 1 setting as an example:

1. In time state, press the [Alarm Button] to turn on alarm; the alarm symbol appears on the display when you turn it on, and disappears when you turn off the alarm.
2. Hold the [Alarm Button] for 3 seconds until the hour time begins to blink, and use the [Up Button] / [Down Button] to adjust the hour time.
3. Press the [Alarm Button] a second time to confirm the hour time and move to the minutes, and use the [Up Button] / [Down Button] to adjust the minutes.
4. Press the [Alarm Button] a third time to confirm the minutes and move to choose the alarm sound. Use the [Up Button] / [Down Button] to adjust your choices. (You can choose between 7 pre-set sounds or FM radio as a wake-up sound.)
5. Press the [Alarm Button] a fourth time to confirm the alarm sound and move to set the wake-up sound volume, and press the [Up Button] / [Down Button] to adjust the volume.
6. Press the [Alarm Button] a fifth time to confirm the volume and move to set the wake-up light. Press the [Up Button] / [Down Button] to adjust the light intensity. (Options: OFF, L-01~L-20)

Note: When the set light time arrives, the light will slowly turn from dark to the preset brightness level. OFF means turning off the light. Set the light state to OFF when you do not need a light to wake up.

Continued Alarm Settings & Snoozing

7. Press the [Alarm Button] a sixth time to confirm the light brightness and move to set the simulated sunrise time. Use the [Up Button] / [Down Button] to adjust from 10-60 MIN, then press the [Setting Button] to confirm, finishing the setting.

You can set the light to turn on 10-60 minutes before the alarm sounds. In the set sunrise simulation time, the light intensity of the lamp gradually increases to the set level and the light color changes from deep morning red to bright daylight.

Leave for about 15 seconds to confirm selected option.

SNOOZING

When alarm clock goes off, press the [Snooze Button] to enter snooze state, you can get an extra 9 minutes of sleep time. (Note: snooze up to 5 times.)

*When alarm clock goes off (or snooze state), press the corresponding alarm clock button to turn off light and sound.

*When alarm clock goes off, if there aren't any operations within 15 minutes, it will turn off light and sound automatically.

SWITCHING THE LIGHT ON/OFF

You can adjust the display type: Sunrise Light OR Colorful Light.

Sunrise Light:

Press the [Setting Button] to turn on/turn off sunrise light.

Press the [Up Button] / [Down Button] to adjust the light intensity.

Colorful Lights:

Double click the [Setting Button] to turn on/turn off colorful lights, and enter automatic mode.

Press the [Up Button] / [Down Button] to switch manual mode.

Long press the [Up Button] / [Down Button] to switch to automatic mode again.

SWITCHING THE FM RADIO ON/OFF

Press the [Radio Button] for 3 seconds to turn on automatic search mode. In your first use, the radio will automatically scan radio frequencies and save the frequency of P01, P02....

Turn on radio

In time state, press the [Radio Button] to switch on/switch off FM radio. Long press the [Up Button] / [Down Button] for three seconds to set FM frequency. Short press the [Up Button] / [Down Button] to set radio volume.

Turn off radio

In radio-on state, press the [Radio Button] to turn off FM radio.

Note: To get a good radio signal, fully unwind antenna and move it around until you receive the best reception.

SETTING THE SLEEP TIMER

1. Press the [Sleep Timer Button] to initiate sleep timer.
2. Long press the [Sleep Timer Button] to set the simulated sunset time, and press the [Up Button] / [Down Button] to adjust the timer.
3. Press the [Sleep Timer Button] a second time to set the sleeping light, and press the [Up Button] / [Down Button] to adjust the light intensity.
4. Press the [Sleep Timer Button] a third time to set the sleeping music, and press the [Up Button] / [Down Button] to choose the sound. You can use the natural sounds or the FM radio as a sleeping sound; the wake-up light has three built-in natural sounds.
5. Press the [Sleep Timer Button] a fourth time to set the sleeping sound volume, and press the [Up Button] / [Down Button] to adjust the volume.

Note: After finish setting, the light will slowly turn from the preset brightness level to dark, and the light will turn off at the end of the preset time.

Leave for about 15 seconds to confirm selected option.

CONNECTING YOUR MOBILE DEVICE

1. Download Smart Life into your mobile device from App Store/ Google Play or by scanning QR code.

• Download 'Smart Life' / Scan for Video Instruction

Android/IOS | Scan for Video Instruction

2. Create an Account and Log in

Follow the on-screen prompts within the Smart Life app to create a new account or log in with an existing one. This typically involves providing an email address or phone number and setting a password.

3. Add Device & Connect WIFI

After logging into the Smart Life app, you will add your HeimVision A80S device.

To connect to Wi-Fi:

1. Turn the device on.
2. Long press the [Snooze Button] (about 10 seconds) until the Wi-Fi icon begins to flash rapidly.
3. If there is no response after long pressing the [Snooze Button], turn off the device completely and repeat the above steps.
4. In the Smart Life app, select 'Add Device' and choose the appropriate device type (e.g., Lighting Devices).
5. Enter your Wi-Fi network name and password.
6. Wait for the device to connect. The app will show the connection progress.
7. Once connected, create a name for your wake-up light (e.g., "Bedroom Light").

4. How to Operate the Light via Smart Life APP Operation Panel

The Smart Life app provides comprehensive control over your HeimVision A80S.

A. Click the [Alarm Button] icon to set the four alarm clocks.

Within the app, you can set multiple alarms, including:

• Alarm clock 1, 2, 3, 4 settings
• Repeat schedule (e.g., Everyday)
• Alarm sound selection (including built-in sounds and FM radio)
• Sunrise simulation time (e.g., 10 MIN)
• Sunrise brightness level
• Snooze support

B. Click the [Light Button] icon to choose the light display type and adjust the light intensity.

You can select between:

• Sunrise Light mode
• Colorful Light mode (automatic or manual control)
• Adjust light intensity from 1% to 100%

C. Click the [Snooze Button] icon to set the snoozing pattern.

Configure your preferred snooze settings:

• Snooze Mode
• Snooze Time (e.g., 9 MIN)

D. Click the [Radio Button] icon to turn on/turn off the FM radio, and choose the frequency you want.

Control the FM radio functionality:

• Adjust volume
• Search for stations
• Select desired frequencies

E. Click the [Sleep Timer Button] icon to set the sleep timer and create your Sleep AID.

Set up a relaxing sleep environment:

• Sleep Mode
• Sleep Sound selection (e.g., River sound)
• Ring Time for sleep timer
• Volume adjustment

F. Click the [Setting Button] icon to set the time of the wake-up light and time display brightness.

Configure device settings:

• Network auto-time synchronization
• Time Display Brightness adjustment

HOW TO CONNECT WITH AMAZON ALEXA

Integrate your HeimVision A80S with Amazon Alexa for voice control.

1. Download the Amazon Alexa app and sign in to your Amazon account.

2. Select 'Skills & Games' in the Alexa app, search for "Smart Life", and tap 'ENABLE TO USE'.

You will be prompted to link your Smart Life account.

Link Account and Discover Devices

Login to your "Smart Life" account when prompted by Alexa, then Authorize the connection. Close the successfully linked page to proceed to the 'Discover Devices' page.

This wake-up light works with Alexa. Through the Smart Life skill, Amazon Alexa will find and list devices you originally added in the Smart Life App.

Follow the on-screen prompts to discover your devices.

Add Devices in Alexa App

Note: If your Smart Life account has linked to Alexa, please add the devices by following these steps:

1. In the Alexa app, go to 'Devices' and tap the '+' icon to add a device.
2. Select 'Add Group' or 'Add Device'.
3. Choose the device type (e.g., 'Light') and the brand (e.g., 'Tuya').
4. Follow the instructions to connect your Tuya light to Echo. This may involve confirming the light is set up in the Tuya app and then pressing 'Discover Devices' in Alexa.
5. Once discovered, your wake-up light is set up and ready to use with Alexa voice commands (e.g., "Alexa, turn off wake-up light.").

HOW TO CONNECT WITH GOOGLE HOME

Connect your HeimVision A80S to Google Home for voice control and smart home integration.

1. Download the Google Home app and sign in to your Google account.

Ensure your Google account is set up and you can access Google services.

Link Account and Choose Devices

2. Login to your "Smart Life" account within the Google Home app, then Authorize the connection. Close the 'Accounts now linked' page after it is connected successfully to enter the 'Choose Device' page.

You can then control the wake-up light via Google Home after completing the setup. Assign your discovered devices to rooms within your home for better organization and control.

WARRANTY

30-Day Money-Back Guarantee for Any Reason

You may return your product within 30 days of purchase to receive a FULL REFUND for any reason. However, if the reason for return isn't quality-related, the customer must pay for the return shipping.

24-Month Warranty for Quality-Related Issues

HeimVision warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. Within 24 months, HeimVision will provide a replacement and cover any return shipping costs for products that fail in normal use.

CUSTOMER SUPPORT

For assistance, please contact HeimVision customer support:

North America: support@heimvision.com

United Kingdom: support.uk@heimvision.com