Hama Universal Notebook Power Supply 65W

Package Contents

• Universal notebook power supply unit
• 7 notebook connectors
• Power cord
• Operating instructions

Safety Instructions

General Safety

• Use only for intended purpose.
• Do not use near heat sources or direct sunlight.
• Ensure adequate ventilation and heat dissipation.
• Use only in moderate climatic conditions.
• Do not use where electronic products are prohibited.
• Avoid damp environments and splashing water.
• Do not short-circuit the battery of an opened device (risk of explosion).
• Protect from dirt, moisture, overheating; use only in dry environments.
• Do not drop or expose to major shocks.
• Do not operate outside specified power limits.
• Pull the plug, not the cable, when disconnecting.
• Route cables to prevent tripping hazards or blocking exits.
• Do not bend or crush cables.
• Keep out of reach of children.
• Do not modify the device (voids warranty).
• Keep packaging material away from children (suffocation risk).
• Dispose of packaging material according to local regulations.

Electrical Safety

• Do not open or continue use if damaged.
• Do not use if AC adapter, cable, or power cord is damaged.
• Do not attempt self-service or repair; use qualified experts.

Start-up and Operation

Mains Voltage: 100-240 V (suitable for worldwide use, may require country-specific adapter).

Check Notebook Voltage: Ensure your notebook requires 15V/19V (+/- 1 Volt). ⓘ This information is on the original power supply or in the notebook's manual. Consult the dealer or manufacturer if unsure.

Set Voltage Selector: Adjust the switch to the required voltage.

Warning: Do not use if voltage cannot be determined. Do not change voltage during operation. Ensure total notebook power consumption does not exceed 65W. Failure to comply may damage the unit and connected device. ⚠️

Connection Steps:

1. Check Voltage: Refer to your notebook's manual or the original power supply to determine the correct voltage requirement (15V or 19V). ⓘ This is illustrated by a laptop screen showing 'VOLT' under a magnifying glass.
2. Select Connector: Choose the appropriate notebook connector from the provided set that matches the connector on your original power supply. ⓘ This is shown by comparing the original adapter's connector with seven different notebook connectors, marking the correct one with a checkmark (✓).
3. Test Compatibility: Without connecting to the power supply, check the mechanical fit between the selected notebook connector and your notebook's power socket. The connector should slide in easily but without excessive play.
4. Connect Cable: Attach the selected notebook connector to the DC connection cable of the power supply unit. [image: connector being inserted into cable end]
5. Connect Power: Connect the power cord to the power supply unit and then to your notebook. Then, connect the mains plug to a properly installed wall socket. [image: sequence of connecting laptop, cable, plug, and socket]
6. Use: The notebook can now be used and charged.

Care and Maintenance

• Disconnect from mains before cleaning.
• Clean with a slightly damp, lint-free cloth. Do not use aggressive cleaners.
• Ensure no water enters the product.

Warranty Disclaimer

Hama GmbH & Co KG is not liable for damage from improper installation, mounting, use, or failure to follow instructions/safety notes.

Technical Data