AOBOSI H1-3600 Desktop Range Hood

1. Precautions

This product is suitable for kitchen islands, living rooms, meeting rooms, and other places. It is used to suck the oily fumes generated by electric grill pans, electric hot pots, multi-functional pots, electric baking pans, electric barbecue machines, etc., and pass through specific filters. After the net separates the oil fume, it discharges clean air indoors. It is a small / movable / internal circulation oil fume filtering machine.

• Must be repaired by professional personnel.
• When moving, cleaning, or disassembling this product, operation must be stopped and the power supply disconnected.
• Do not attempt to replace the supply cord by yourself. If the supply cord is damaged, it must be replaced by its manufacturer, a service department, or similarly qualified personnel to avoid a hazard.
• After each use, the oil collection cup and filter assembly need to be cleaned in time, and the filter assembly should be replaced regularly.
• Do not operate with wet hands.
• Do not place objects on top of the machine.
• Do not insert other objects into the air inlet and outlet.
• Ensure that children are not allowed to play or use this machine to prevent accidents.
• This product is only suitable for household use. The manufacturer does not assume any responsibility if it is used for other purposes.
• It is forbidden to use this product with open flame cooking utensils, or place this product near a fire source.
• It is prohibited to store flammable and explosive gases in places where this product is used.
• It is forbidden to use in places with heavy humidity and easy to be exposed to water, such as bathrooms.
• Do not place the machine on an inclined or unstable place. Avoid long-term direct sunlight.

2. Product Introduction

The device features a magnetic connector, control panel, plug input, oil collector, oil collection cup, and filter assembly.

Accessories:

3. Product Assembly

3.1 Filter Assembly

Align the filter with the oil collector and push the filter into the air inlet tightly. The device is equipped with both a carbon filter and a cotton filter. For the best suction performance, use only one filter at a time.

3.2 Clean the Filter and Cup

Take out the filter assembly and the oil collection cup. Rinse them with lukewarm water and dry them completely. Avoid disassembling the metal filters for cleaning, as this may expose sharp edges that could cause hand injuries. Avoid forcefully taking apart the filter as it could impact the product's functionality.

4. Product Usage

Speed Buttons and ON/OFF Button

After turning on, press a button to choose your desired speed setting. Press the ON/OFF button to turn the product on/off. Be sure to turn on the product before choosing a speed setting.

4.1 Power Connection and Storage

• Please use the original adapter for power supply.
• Prevent the cable from dangling freely (to avoid tripping).
• Do not use this product if the machine is not operating normally or if it is visibly damaged.

4.2 Guidelines for Using this Product with Other Small Appliances

• For better oil fume extraction efficiency, it is recommended to position this product alongside other small appliances.
• If you are using this item alongside other small appliances, ensure they are all positioned on the same surface, with a minimum gap of 8 cm between the bottom of this product and the pot's rim (the distance can be adjusted as needed according to the pot type).
• Avoid directing the oil fumes towards the human body through the air outlet.
• It is not allowed to relocate or apply pressure on the equipment while it is in operation.
• Children, the elderly, or patients who have lost the ability to take care of themselves, please use this product under adult supervision to prevent accidents.
• When using this product, it should be placed out of reach of children, and children should be taught correctly not to use this product as a toy.
• There must not be any objects blocking the air inlet/outlet.

Environmental Requirements: Temperature: 5-40°C (41-104°F), Humidity: 45-75%

5. Product Maintenance

Cleaning, Maintenance, and Related Safety Matters

• The power supply must be disconnected and the impeller must be completely stopped before cleaning or maintenance can be performed to avoid injury.
• To avoid odor or filter clogging after use, please clean the filter assembly and oil collection cup after each use of this product, and rinse it with warm water and dish soap (do not use hot water above 60°C (140°F) for cleaning).
• It is recommended to replace the filter assembly once every six months (the replacement cycle can be adjusted according to the use environment).
• Before cleaning, maintaining, or moving the product, the product must be turned off and unplugged.
• Do not immerse the power cord or housing in water for cleaning or rinse under the faucet. Do not allow the internal parts of the product to get wet.
• Do not use detergents, wire brushes, gasoline, vinegar, or other volatile corrosive liquids to clean the product to avoid damage to the product.
• Use a slightly damp cloth to clean the surface of the housing.
• After cleaning the filter assembly, you must wait until the filter assembly is completely dry before connecting to the power source.
• If it will not be used for a long time, please clean and dry the filter assembly and oil collection cup, then store them back in the packaging box and place them in a dry, cool, and safe place.

6. Disposable Filter

Instructions for cleaning and replacing disposable filters are provided with diagrams.

7. Technical Parameters

8. Troubleshooting

Refer to the table for troubleshooting common issues.

If the following conditions occur, please contact after-sales service:

1. The device functions irregularly or not at all, and the above methods are invalid.
2. Abnormal functioning occurs due to the infiltration of outside materials or water.