YITAHOME Outdoor Storage Box
Model: FTPLDB-0058, FTPLDB-0059
Contact Us
For any questions regarding the installation of YITAHOME products, please email after-sale.cs@hotmail.com.
For Amazon.co.uk orders, you can also contact us by:
- Logging into your Amazon account.
- Navigating to "Your Orders".
- Clicking "Contact Seller".
Product Names in Multiple Languages
- English: OUTDOOR STORAGE BOX
- German: AUFLAGENBOXEN
- French: COFFRE DE RANGEMENT
- Italian: BAULE DA ESTERNO
- Spanish: BAUL ALMACENAJE EXTERIOR
Installation Guide
Important Note: Once installed, the product cannot be detached. Strictly follow each step in the installation manual.
General Installation Guidelines:
- Gather and organize all required parts prior to assembly.
- Assemble on a flat, clean, and soft surface.
- Two or more people are recommended for assembly.
- Align the holes before assembly and snap into place with a slight tap.
- A rubber mallet is recommended for convenient installation.
- The product's structure prevents it from being conveniently assembled in low temperatures. Avoid intentional installation in low temperatures.
- During installation, refer to the accessories guides to ensure that they are installed in the correct directions.
Parts Identification
| Item No. | Reference Image | Quantity |
|---|---|---|
| A | [Back Panel] | X1 |
| B | [Base Panel] | X1 |
| C | [Side Panel] | X2 |
| D | [Front Panel] | X1 |
| E | [Lid] | X1 |
Assembly Steps
-
Step 1: Initial Assembly
Diagram shows the base panel (B), two side panels (C), front panel (D), and top panel (C) being assembled. Arrows indicate connection points. The diagram indicates 2 pieces of part C and 1 piece of part D are used in this initial assembly stage.
-
Step 2: Attach Side Panels to Base
Diagram shows the base panel (B) with the two side panels (C) and front panel (D) being attached. Arrows indicate the connection points, suggesting the panels slot into the base.
-
Step 3: Attach Back Panel
Diagram shows the assembled base and sides with the back panel (A) being attached. Arrows indicate the connection points, suggesting the back panel slides or slots into place. The diagram indicates 1 piece of part A is used.
-
Step 4: Attach Lid
Diagram shows the lid (E) being placed onto the assembled storage box. Arrows indicate the connection points, suggesting hinges or clips. The diagram indicates 1 piece of part E is used.
-
Step 5: Completed Assembly (Lid Open)
Diagram shows the fully assembled outdoor storage box with the lid open, revealing the interior storage space.
-
Step 6: Final Product View
Diagram shows the fully assembled outdoor storage box with the lid closed.
Status: Installation Completed.
Multilingual Status: Vollständige Installationsergebnisse (German), Installation complète (French), Installazione completata (Italian), Instalación completa (Spanish).
