YITAHOME TZSK-V4 Deck Box
Contact Us
For any questions regarding the installation of YITAHOME products, please email: after-sale.cs@hotmail.com.
Alternative Contact Method (for amazon.co.uk orders only):
- Log into your Amazon account.
- Navigate to "Your Orders" and locate the purchase.
- Click on "Contact Seller".
Important Installation Notes
Once installed, the product cannot be detached. Strictly follow each step in the installation manual.
- Gather and organize all required parts prior to assembly.
- Assemble on a flat, clean, and soft surface.
- Two or more people are recommended for assembly.
- Align the holes before assembly and snap into place with a slight tap.
- A rubber mallet is recommended for convenient installation.
- The product's structure may prevent convenient assembly in low temperatures; avoid intentional installation at low temperatures.
- During installation, refer to the accessories guides to ensure parts are installed in the correct directions.
Parts List
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| A | Large panel (X2) | 2 |
| B | Panel with hinge slots (X1) | 1 |
| C | Large panel (X2) | 2 |
| D | Metal rod/bar (X3) | 3 |
| E | Connector/bracket (X3) | 3 |
| G | Connector/hook (X1) | 1 |
| H | Hinge rod (X1) | 1 |
| I | Hinge bracket (X2) | 2 |
| J | Slatted panel (X1) | 1 |
| L | Screw (X39) | 39 |
| T | Mounting plate/bracket (X7) | 7 |
Installation Steps
Step 1
Attach slatted panels (J) to the base structure using screws (L) and mounting plates (T).
Diagram Description: Shows two large slatted panels (J) being secured to a base using screws (L) and small metal plates (T).
Step 2
Attach connectors/brackets (E) and hooks (G) to the main structure. Part E should be tilted for easier installation.
Diagram Description: Shows smaller plastic connectors (E) and a hook (G) being attached to the main box structure. An inset shows a 'push' action and a close-up of part E being tilted.
Step 3
Assemble panel B (with hinge slots) to panel A. Use a rubber mallet for convenient installation. Note the correct orientation of part B.
Diagram Description: Shows two large side panels (A) and a back panel (B) being joined. An inset shows how panel B connects to panel A, with a rubber mallet indicated.
Step 4
Assemble panels A and C. Use a rubber mallet for convenient installation.
Diagram Description: Shows two large side panels (A) and front/back panels (C) being joined. A rubber mallet is indicated.
Step 5
Assemble part D (metal rod) to panel C.
Diagram Description: Shows a metal rod (D) being attached to a panel (C). An inset shows a close-up of the connection point.
Step 6
Attach hinge brackets (I) and mounting plates (T) using screws (L).
Diagram Description: Shows hinge brackets (I) and mounting plates (T) being attached to the box structure with screws (L).
Step 7
Assemble the hinge rod (H) to the main body and then to the lid. This connects the lid to the box.
Diagram Description: Shows hinge rods (H) being inserted into the box body and then connected to the lid. Insets show close-ups of the attachment points.
Step 8
Installation Completed.
Diagram Description: Shows the fully assembled YITAHOME Deck Box.
