First Time Use
Wait at least two hours after installation before connecting the appliance to the power supply. Once connected, the appliance starts operation automatically. The ideal storage temperatures for food are preset at the factory.
After turning the appliance on, wait for 4-6 hours for the correct storage temperature to be reached for a normally filled appliance. Position the antibacterial anti-odour filter in the fan as demonstrated in its packaging (if available). If an audible signal sounds, it indicates a temperature alarm has intervened; press the button to switch off the acoustic alarms.
Control Panel
The control panel features the following indicators and controls:
- 1. Refrigerator Temperature / Stand By: Controls refrigerator temperature and Stand By mode.
- 2. Temperature Indicator setting: Shows the set temperature.
- 3. Refrigerator Indicator: Indicates the refrigerator compartment status.
- 4. Alarm Indicator: Alerts to temperature alarms.
- 5. Freezer Indicator: Indicates the freezer compartment status.
- 6. Freezer Temperature / Stop Alarm: Controls freezer temperature and stops acoustic alarms.
The panel displays temperature settings for Fridge and Freezer, along with indicators for Alarm, and a Stop Alarm function.
Setting the Temperatures
Press the Refrigerator Button to set a different temperature in the refrigerator compartment. The recommended setting is MED.
Press the Freezer Button to set a different temperature in the freezer compartment. The recommended setting is MED.
Temperature options include: LEAST COLD, MEDIUM, COOLEST TEMP.
On/Stand-By: Press the Refrigerator Temperature button for 3 seconds to turn the appliance on stand-by. When in Stand-by mode, the refrigerator compartment light does not turn on. Press the button again briefly to reactivate the appliance. Refer to the user manual online for recommended settings and storage times to avoid food waste.
Fast Freezing: To best preserve food, use the Fast Freeze function before adding a large quantity of food to the freezer. Press button 6 until all three LEDs are on to activate the function. It turns off automatically after 26 hours or when a different freezer temperature is selected. Avoid direct contact between fresh and already frozen food. For faster freezing, drawers can be removed, and food can be placed directly on the compartment bottom.
*Available only on certain models.
How to Store Fresh Food and Beverages
Legend for Storage Zones
- MINOR COOL ZONE:
- Suggested for tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam.
- COOL ZONE:
- Suggested for cheese, milk, daily food, delicatessen, yogurt.
- COOLEST ZONE/DRAWER:
- Suggested for cold cuts, desserts, meat, and fish.
- FRUIT & VEGETABLE DRAWER:
- For fruits and vegetables.
- FREEZER DRAWERS:
- For frozen items.
- FREEZING ZONE DRAWER (Max cool zone):
- Suggested to freeze fresh/cooked food.
Load limits are determined by the appliance's construction (baskets, drawers, shelves) or natural load limits.
Refrigerator Compartment
Multiflow Air Distribution:
The Multiflow system distributes cold air evenly throughout the cavity for better food preservation. Foods can be placed on any shelf. Ensure air distribution vents are not obstructed for free air movement.
Humidity Control:
Use the humidity regulator: open it to position B for a less humid environment (e.g., fruit), or close it to position A for a more humid environment (e.g., vegetables). *Available only on certain models.
Multi Fresh Zone
This zone offers 3 temperature selections for optimal preservation:
- LOW: Meat and Fish
- MID: Dairy Food (Cheese and Yogurt)
- HIGH: Fruits and Vegetables
For correct functioning of the "Multi Fresh Zone" drawer, ensure the appliance is turned on and that Standby, Cooling-Off, or Vacation functions are not selected. If these functions are active, remove food from the drawer.
Freezer Compartment and Features
Light System
The product's light sources have energy efficiency classes ranging from G to F, depending on the model.
Total No Frost System
This system prevents ice formation, eliminating the need for manual defrosting in both the freezer and fridge cavities. Its ventilation system circulates cold air perfectly, preventing ice build-up.
Ice Cubes
Fill ice trays two-thirds full with water and place them in the freezer compartment. Do not use sharp or pointed objects to remove ice.
The quantity of fresh food that can be frozen in 12 and 24 hours is indicated on the rating plate.
Easy Access Tray
This tray is useful for easily accessing frequently used products, freezing items, or storing small leftovers. *Available only on certain models.
Fast Freeze Pad (Alu PAD)
The metallic panel helps to freeze food faster. It can be removed for cleaning by lifting it from the left angle.
Fresh Pad
The Fruit & Vegetable drawer is equipped with a Hygiene grid. This grid prevents direct contact between fruits/vegetables and natural leakages (like drip loss or moisture) that collect below it. The grid is treated with Microban SilverShield® technology, reducing harmful bacteria by up to 99.9% for enhanced preservation. The hygiene grid can be removed for washing by hand (with water or neutral detergent) or in a dishwasher. Dry it before replacing.
**Independently tested by IMSL (Industrial Microbiological Services Ltd, UK) using ISO 22196.
General Information
Drawers, baskets, and shelves should remain in their current positions unless otherwise specified. The refrigerator compartment's LED lighting provides better illumination and lower energy consumption.
Disposal:
Remove doors and lids before disposing of the appliance in a landfill to prevent children or animals from becoming trapped.
Removing the Drawers
Pull drawers outwards as far as they go, lift them up, and remove them. For more space, the freezer compartment can be used without drawers. Ensure the door is closed properly after placing food back on grilles/shelves.
Troubleshooting
Refer to the table below for common issues and their solutions:
| What to do if... | Possible reasons | Solutions |
|---|---|---|
| The control panel is switched off, the appliance does not work. | The appliance could be in On/Standby mode. There may be an appliance power supply problem. |
Activate the appliance with button 1. Make sure: there is no power outage; the plug is properly inserted; the mains double-pole switch is in the correct position; household electrical system protection devices are efficient; the power cable is not broken. Contact the Authorized service center if issues persist. |
| The inside light does not work. | The light may need replacing. The appliance could be in On/Standby mode. |
Activate the appliance with button 1. |
| The temperature inside the compartments is not low enough. | There could be various causes (see "Cures"). | Make sure: doors close properly; appliance is not near a heat source; set temperature is adequate; air circulation through vents is not obstructed. |
| The front edge of the appliance, at the door striker seal, is hot. | This is not a defect. It prevents condensation from forming. | No cure is necessary. |
| Acoustic signal sounds. | Door open alarm: Activated when a door remains open for a long period. Black Out alarm: Activated after a prolonged power outage causing temperature increase in the freezer compartment. Note: A different temperature cannot be set until the Black Out alarm is deactivated. |
Close the doors to deactivate the acoustic signal. For Black Out alarm, press the "Stop Alarm" button briefly to deactivate. The temperature LEDs will show set temperatures again. If the freezer compartment has not yet reached optimum temperature, the alarm may reactivate. Check food before consuming. Pressing button 1 or button 6 snoozes the acoustic alarm. |
| Freezer compartment temperature alarm | Indicates the compartment temperature is not optimum. This may happen: with first use, after defrosting/cleaning, if large amounts of food are placed inside, or if the freezer door has not been closed properly. | Check the food before consuming. Pressing button 1 or button 6 snoozes the acoustic alarm. |
*Available only on certain models.
Further Information
Policies, standard documentation, and additional product information can be found by:
- Visiting the website: docs.whirlpool.eu
- Using the QR Code (Note: QR codes are excluded from this HTML output).
- Contacting After-Sales Service (phone number in the warranty booklet). When contacting, please state the product's identification codes. Model information can be retrieved using the QR-Code on the energy label, which also includes the model identifier for consulting the https://eprel.ec.europa.eu database portal.
Model Number Example: 400011515862/B
