Selfie Screen SC01 User Manual

Specifications

The device is a portable screen with a 3.97-inch LCD display.

Function Description

Power On/Off: Flip the switch to ON to start; OFF is Power Off.

Screen 180° Rotation: Short press the [rotation button] ?.

Screen Mirroring Flipping: Long press the [flip button] ↔️.

Brightness Adjustment: Long press the [brightness/shoot button] ? to adjust the screen brightness in three levels.

Shoot: When the screen's Bluetooth is connected to the mobile phone's Bluetooth, you can take photos and record videos directly from the screen using the [shutter button] ?.

Screen Displays Proportional Adjustment: Short press the [proportional adjustment button] ? to switch to full screen mode, and again to switch to 1:1 mode.

The device features a 3.97-inch LCD Screen. It has a Power Button, Charging Indicator, USB-C Charging Port, and Audio/Video Transmission Port. It also includes a Screen Rotation/Mirroring Flipping Button and a Photo/Dimming Button. A separate button is designated for proportional adjustment.

The charging indicator light stays on "RED" during charging and turns Green when fully charged.

Connection Instructions

Wireless Connection Mode (Suitable for iPhone and Android smartphones)

IOS

1. Power switch to ON; automatic boot.
2. Swipe down the phone screen to open the shortcut menu bar.
3. Find the screen projection function of your phone and tap to open it. [screen mirroring icon] [play icon] [cast icon] ...
4. Find SC01 in the search list and click connect device.
5. The screen is successfully cast.

Visual Description: An iPhone is shown connected wirelessly to the SC01 screen.

Android

1. Power switch to ON; automatic boot.
2. Swipe down the phone screen to open the shortcut menu bar.
3. Find the screen projection function of your phone and tap to open it. [screen mirroring icon] [play icon] [cast icon] ...
4. Find SC01 in the search list and click connect device.
5. The screen is successfully cast.

Visual Description: An Android phone is shown connected wirelessly to the SC01 screen.

Wired Connection Mode (IOS)

1. Plug and Play.
2. When connecting to an Android device for the first time, it will automatically download software (HCCast).
3. Power switch to ON; automatic boot.
4. For iPhone 15 series phones and Android phones, use the included USB-C data cable to connect the iPhone and the screen to enable screen mirroring. Plug and play.
5. NOTE: For iPhone 14 and below models, use a lightning to type-c data cable (NOT included).
6. The screen is successfully cast.

The device has a USB-C Charging Port and an Audio/Video Transmission Port.

Bluetooth Connection Mode (IOS/Android)

Please ensure that the phone screen has been successfully cast before connecting the Bluetooth.

1. Slide down the phone's status bar to find Bluetooth, or locate the Bluetooth option in Settings.
2. Turn on Bluetooth and find the device named "SC01" in the list of available Bluetooth devices.
3. Click on "SC01" and connect to the device until it shows "Connected" (or "Connection Successful").
4. After a successful connection, open the camera and press the shutter button on the device to remotely take photos with your phone.

The device features a Brightness Adjustment Button / Shoot Button.

Warranty

This product has a 12-month warranty from the date of purchase.

Visual Description: An outline drawing of the back of the SC01 device is shown.

FCC Compliance Information

FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.