Braun Silk-épil 3 Epilator

Introduction and Safety Information

Please read these instructions carefully before use and keep them for future reference.

Important Safety Notes:

• For hygienic reasons, do not share the appliance.
• The appliance has an integrated Safety Extra Low Voltage power supply. Do not alter any part to avoid electric shock.
• Keep the appliance dry.
• Not intended for use by children or persons with reduced physical, sensory, or mental capabilities unless supervised. Keep out of reach of children.
• Ensure the appliance does not contact hair on the head, eyelashes, or clothing when switched on to prevent injury or damage.

General Information on Epilation

Hair removal at the root may cause temporary skin irritation (itching, discomfort, or reddening) especially with initial use or sensitive skin. This is a normal reaction and should subside quickly. Persistent irritation may require consulting a physician.

Regular use of Silk-épil tends to diminish the sensation of pain. Thorough cleaning of the epilation head before each use minimizes the risk of infection.

Consult a physician before use if you have conditions such as eczema, wounds, inflamed skin reactions (e.g., folliculitis), varicose veins, moles, reduced skin immunity (e.g., diabetes mellitus, during pregnancy), Raynaud's disease, haemophilia, or immune deficiency.

Epilation is most comfortable when hair is 2-5 mm long. For longer hair, shaving first is recommended, followed by epilating the shorter, regrowing hair a week later.

To prevent ingrown hairs, regular exfoliation using massage sponges or peelings is advised, as gentle scrubbing removes the upper skin layer, allowing fine hair to reach the surface.

Product Description

The Silk-épil 3 epilator includes the following components:

• 1. Massaging rollers attachment: Stimulates the skin before and after hair removal for an extra gentle experience.
• 2. Epilation head with tweezer element: The core component for hair removal.
• 3. Release buttons: Used to detach the epilation head from the main body.
• 4. On/off switch with incorporated light: Controls the appliance's power and illuminates the treatment area.
• 5. Socket: Connection point for the special cord set.
• 6. Special cord set: Provides power to the appliance.
• 7. Shaver head attachment with trimmer cap: Used for shaving and trimming hair.

How to Epilate

Ensure your skin is dry and free from grease or cream. Before use, confirm the epilation head (2) is clean.

Operation: To turn on the appliance, slide the on/off switch (4) upwards. Setting 'I' offers extra gentle epilation, while setting 'II' provides extra efficient epilation.

The integrated switch light illuminates the area to be epilated.

Technique: Rub your skin to lift short hairs. For optimal performance, hold the appliance at a 90° angle against your skin. Guide it smoothly against the direction of hair growth without applying pressure. The massaging rollers (1) stimulate the skin for a gentler epilation.

Leg Epilation

Epilate your legs starting from the lower leg and moving upwards. Keep the leg stretched straight when epilating behind the knee.

Underarm and Bikini Line Epilation

Be aware that these areas are particularly sensitive, especially at the beginning. It is recommended to start with switch setting 'I'. The pain sensation typically diminishes with repeated use.

Before epilating, thoroughly clean the respective area to remove residue (like deodorant) and carefully pat dry with a towel. When epilating the underarm, keep your arm raised and guide the appliance in different directions.

Cleaning the Epilation Head

After epilating, unplug the appliance. Remove the massaging rollers (1) and clean the epilation head (2).

Thoroughly clean the tweezer element using the cleaning brush dipped into alcohol. You can turn the tweezer element manually while cleaning. To remove the epilation head, press the release buttons (3) on the sides and pull it off. After cleaning, reattach the epilation head and the massaging rollers to the housing.

How to Use the Shaver Head

Remove the epilation head and attach the shaver head (7) by clicking it into place, ensuring the long hair trimmer is positioned at the front.

Remove the trimmer cap (a).

Operation: When using the shaver head, always select switch setting 'II'.

Technique: For best results, guide the shaving system so that approximately half of the shaving foil and the long hair trimmer touch your skin. Always guide the appliance in the direction of the trimmer. The trimmer first raises and cuts long hairs, followed by the flexible foil smoothing away any stubble.

Pre-cutting Hair for Epilation

If you choose to pre-cut your hair to the ideal length for epilation, place the trimmer cap (a) onto the shaver head. Hold the appliance with the trimmer cap lying flat on the skin and guide it with the comb tips against the hair growth. As hairs grow in various directions, guide the appliance slightly diagonally or in different directions to achieve the best results.

Cleaning the Shaver Head

After shaving, unplug the appliance. If necessary, remove the trimmer cap (a) and clean it with the brush.

To clean the shaver head, remove the shaving foil frame (b). To do this, press the release bars (c) on the front and back and pull off the frame. Carefully tap the shaving foil frame on a flat surface.

Brush out the cutter block (d) as well as the area below the cutter block. The shaving foil is a very delicate part and must not be cleaned with the brush.

For maintenance, it is recommended to put a drop of light machine oil along the length of the trimmer every 3 months.

Place the shaving foil frame back on and snap it into place. Replace the trimmer cap, which also serves as a protective cap.

Note: Do not use the shaver head with a damaged shaving foil.

Replacing Shaving Parts

The shaving foil and the cutter block are precision parts that wear out over time. Have the shaving foil frame and the cutter block replaced when you notice a reduced shaving performance even after cleaning the shaver head.

Disposal

Please do not dispose of this product in household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.

Disclaimer

Subject to change without notice.