Kmart Digital Watch Instruction Manual
Digital Module Instructions
正面
The watch features a digital display showing the time '3:45'. It has four control buttons: 'Light' on the top left, 'Mode' on the bottom left, 'Start' on the top right, and 'Reset' on the bottom right.
Features
- Hour/Minute/Second
- Display light
- Stopwatch function
- Alarm
- Hourly chime
- Stainless steel back and buckle
- Day/Date display
Important Notes
The watch must not be used in water. Do not use chemical solutions to clean the watch. Use a clean dry cloth only.
Direct contact with sprays such as hairsprays and perfumes may cause damage to your watch.
Leather straps and PU straps deteriorate at different rates depending on climatic conditions, sweat acidity, and levels of wear and tear.
Battery type: Please refer to the case back for the battery information. For battery replacements, contact your local watch repairer.
Exhausted batteries should be removed and discarded of immediately. Must be kept out of reach of children.
Setting the Watch
In normal display settings
Setting the Seconds
Press "Mode" 3 times to display "second" settings. Press "Start" to set seconds.
Setting the Minutes
Press "Reset" once to display "Minute" settings. Press "Start" to set minutes.
Setting the Hour
Press "Reset" once to display "Hour" settings. Press "Start" to set hour.
Note that when setting the hour, the watch will cycle through:
- Twelve hours while showing the "A" for indicating AM.
- Twelve hours while showing the "P" for indicating PM.
- 24 hours (0-23) while not showing "A" or "P", indicating 24hr mode.
Setting the Day of the Week
Press "Reset" once to display "Day" settings. Press "Start" to set the Day of the week.
Setting the Month
Press "Reset" once to display "Month" settings. Press "Start" to set the Month.
Setting the Date
Press "Reset" once to display "Week" settings. Press "Start" to set the date.
Press "MODE" once to store the settings.
Stopwatch Setting
Press "Mode" once to display stopwatch setting.
Press "Start" to start.
Press "Start" to pause.
Press "Reset" to reset.
Alarm Setting
In normal display setting, press "Mode" twice for the hour setting.
Press "Start" to set hour.
Press "Reset" once for the minute setting.
Press "Start" to set minute.
Press "MODE" once to store the settings.
Activating the Hourly Chime & Alarm
In the normal display mode, press and hold the "Reset" button.
While the "Reset" button is pressed, also press the "Start" button to either activate or de-activate.
Release both buttons to save your preference.
Depending on the model, either the "ALM" (alarm) and "CHI" (hourly chime) will be displayed, or a bell symbol [bell-symbol] will be displayed.
Day/Date Display
- In the normal time display mode, press and hold "Start" to see the date and month.
- Release the "Start" button, and the display will return to normal time display.
WARNING
DISPOSE OF USED BATTERIES IMMEDIATELY.
BUTTON CELL BATTERIES ARE HAZARDOUS (NEW OR USED). KEEP AWAY FROM CHILDREN. BUTTON CELL BATTERIES CAN CAUSE SEVERE OR FATAL INJURIES IN 2 HOURS OR LESS IF THEY ARE SWALLOWED OR PLACED INSIDE ANY PART OF THE BODY.
IF YOU SUSPECT YOUR CHILD HAS SWALLOWED OR INSERTED A BUTTON CELL BATTERY, CALL THE 24-HOUR POISONS INFORMATION CENTRE IN AUSTRALIA ON 131126 OR IN NEW ZEALAND 0800 764 766 OR CONTACT YOUR COUNTRY'S EMERGENCY DEPT.
