Operating Modes
Count Timer Mode
Under normal time mode, press MODE to enter Stopwatch mode. Press START/STOP to start/stop timing, and SPLIT/RESET to reset.
Double Count Timber Mode
Press START/STOP to begin timing. Press SPLIT/RESET to record the first count. Press SPLIT/RESET again to add the first count and continue timing. Press START/STOP to stop, and SPLIT/RESET to reset.
Display Double Count Time
Press START/STOP to begin timing. Press SPLIT/RESET to view the first count time. Press START/STOP again to stop timing. Press SPLIT/RESET again to view the second count time. Press SPLIT/RESET to reset.
Display Time, Calendar, Week, and Alarm Time
In normal time mode, holding START/STOP displays Month/Day/Week. Holding SPLIT/RESET displays Alarm time. Pressing SPLIT/RESET and START/STOP together toggles the alarm.
Time and Day Setting
In normal time mode, press MODE three times. Seconds and Week will flash. Use START/STOP to adjust values (hold for faster adjustment) and SPLIT/RESET to cycle through Second/Minute/Hour/Day/Month/Week. Press MODE to return to normal time.
Alarm Time Setting
In normal time mode, press MODE twice. Time and Week will flash. Use SPLIT/RESET to set the alarm minute and START/STOP to adjust. Press MODE to return to normal time.
Important Safety Information
WARNING: Button cell batteries are hazardous. Keep away from children. Swallowing or placing batteries inside the body can cause severe or fatal injuries within 2 hours. If a button cell battery is suspected to have been swallowed or inserted, immediately contact a 24-hour poisons information centre or emergency services. Used batteries must be disposed of properly in designated garbage or battery recycling facilities.
Imported for Kmart Stores in Australia and New Zealand. Made in China.
