Care Instructions & Warnings
Care Instructions: Check and tighten all parts regularly. Wipe clean with a soft damp cloth. For indoor and domestic use.
WARNING: Do not stand, sit or lean on the trolley. Use only on a flat surface. This package contains small parts, keep away from children and babies. Adult assembly required. Failure to follow these warnings could result in serious injury.
Maximum Loading Weight: 7kg for each layer
Parts List
| Part Identifier | Description | Quantity |
|---|---|---|
| A | Vertical Support Rod | 8 PCS |
| B | Wheel with Brake | 2 PCS |
| C | Wheel without Brake | 2 PCS |
| D | Frame Bar | 2 PCS |
| E | Storage Bin | 2 PCS |
| F | Storage Bin | 2 PCS |
| G | Shelf | 2 PCS |
| H | Base Frame | 1 PC |
Note: The assembly instructions may imply quantities or parts not explicitly listed here. Please refer to the assembly steps for detailed guidance.
Assembly Instructions
STEP 1: Assemble Base
Attach the wheels to the base frame. Insert 2 wheels with brakes (B) and 2 wheels without brakes (C) into the designated slots on the base frame (H).
Warning: Please ensure the wheels with and without brakes are installed diagonally.
Diagram Description: Shows the base frame (H) and the four wheels (B, C) being attached.
STEP 2: Attach Vertical Support Rods
Insert four vertical support rods (A) into the corners of the assembled base frame (H).
Diagram Description: Shows the base with wheels, and four vertical rods (A) being inserted into the top of the base frame.
STEP 3: Attach Bottom Shelf
Place the first shelf (G) onto the top of the four vertical support rods (A) installed in Step 2.
Diagram Description: Shows the structure from Step 2, with the first shelf (G) being lowered onto the vertical rods.
STEP 4: Attach Middle Shelf
Add the next set of vertical support rods (A) on top of the first shelf (G) and then place the second shelf (G) onto these rods.
Diagram Description: Shows the structure from Step 3, with more vertical rods (A) added, and the second shelf (G) being placed on top.
STEP 5: Attach Top Shelf and Bins
Add the final set of vertical support rods (A) and place the third shelf (G) on top. Attach the two storage bins (E) and two storage bins (F) to the sides of the trolley as indicated.
Diagram Description: Shows the structure from Step 4, with the top shelf (G) being added, and the storage bins (E, F) being attached to the sides.
Disassemble Method
To disassemble the trolley, carefully reverse the assembly steps. For detaching components, locate the release mechanism (often a clip or lever) and press it to disengage the part.
Diagram Description: Shows the assembled trolley and a close-up view of a release mechanism, indicating to "PRESS" to detach.
