SVBONY SV184 Red Dot Sight Instructions
Mounting Your Red Dot Sight
The red dot sight is designed for mounting on a standard 3/8" dovetail base. As there is no set eye relief for a red dot, allow a minimum of three inches of space between the shooter's eye and the sight when in the shooting position.
Loosen locking nuts "D", and mounting brackets "C". Place the sight on the dovetail base of the crossbow, then tighten up the bolts and locking nuts.
Note: For additional security, add a drop of thread-locking compound to the center of each locking nut.
Diagram and Parts Identification
The red dot sight features several key components:
- (A) Elevation Adjustment
- (B) Red Dot Sight
- (C) Mounting Brackets
- (D) Locking Nuts
- (E) On/Off Switch
- (F) Battery Cover Cap
- (G) Windage Adjustment
- (H) Sight Glass
A visual representation shows the sight mounted on a rail, with labels pointing to these components.
Installing Battery
Red dot sights are powered by one 3V coin style lithium battery, type 2032. To install the battery, pop open the battery cover cap "F". Slide out the old battery and insert the new battery with the positive (+) side facing up. Replace the battery cover cap.
Note: Do not turn the battery cover cap; it is not an adjustment knob.
Zeroing
With the scope mounted, rest the crossbow on a solid support. Turn on the switch "E". Sight along the barrel and aim at a target 10 yards away. Sight through your red dot sight and use the windage adjustment "G" and elevation adjustment "A" to align the lighted reticle with the target as seen along the barrel.
Safety Warnings
- ⚠️ Do not view the sun or other intense light with your products, or even with the naked eye, as this may cause permanent eye damage.
- Children should use the product under the guardianship of adults to avoid unnecessary damage.
- Do not place the plastic packaging where children can reach it. If they put the plastic into their mouths, they may suffer from suffocating.
Care and Clean
The item requires minimal routine maintenance, primarily ensuring the objective lenses and eyepieces are kept clean. Dirty lenses reduce light transmission, decrease brightness, and result in unsharp images. Keep your optics clean. When not in use, store the item in the provided case.
Usage Notice
- Store the product in a ventilated, dry, clean place, or put it in a dry box.
- If there is dust or dirt on the optical lens, use a professional cleaning kit. Do not wipe it directly with a cloth or a hard brush.
- Please do not disassemble or repair the product yourself. If repair is needed, contact the professional after-sales department.
- Do not use non-waterproof products in wet environments. Use waterproof products in wet environments and dry them after use.
- When viewing indoors, do not close the window and watch through it, as this will reduce the product's observation effect.
Choking Hazard
Small Parts. Not for children under 3 years.
Approved Accessories
- ⚠️ This item meets the regulatory standards when used with the Svbony accessories supplied or designated for the product.
- For a list of Svbony-approved accessories for your item, visit the following website: http://www.Svbony.com
Warranty Information
The warranty card includes fields for Product Model, Purchasing Date, Defect Reason, Dealer Name, Telephone, User's Name, User's Address, and User's Email.
Warranty Remarks:
- This guarantee card should be kept by the user; no replacement is provided if lost.
- Most new products carry a one-year manufacturer's warranty from the date of purchase.
- To obtain warranty and after-sales service, contact the seller where you purchased the product.
- For warranty service, a receipt or proof of purchase from the actual seller is required for verification.
Exclusions from Warranty Coverage:
- Any product damaged by accident.
- Damage resulting from misuse, abuse, or unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
EU Importer
Name: Germany Retevis Technology GmbH
Address: Uetzenacker 29, 38176 Wendeburg