AAON Reheat Expansion Module ASM01687
Overview
The AAON Reheat Expansion Module ASM01687 is designed to control a single set of reheat valves. It connects to the MHGRV-X Controller, enabling precise control over multiple valve sets within an AAON HVAC system. AAON Controls is integral to the design and selection of sensors, controllers, software, and mechanical equipment for AAON units.
Physical and Electrical Specifications
Feature | Specification |
---|---|
Operating Power | 18-30 VAC |
Operating Temperature | -30°F to 150°F |
Power Consumption | 12 VA Maximum |
Operating Humidity | 0-95% RH, Non-Condensing |
Communications | E-BUS |
Weight | 1 lb. |
Note: The Reheat Expansion Module contains no user-serviceable parts. Contact qualified technical personnel for service.
Features
- Designed to control one set of reheat valves.
- Connects to the MHGRV-X Controller.
- Supports up to seven Reheat Expansion Modules per system.
- Each module controls one set of reheat valves (one Reheat & one Condenser).
- Includes individual Cooling & Reheat Flush Timers.
- Connects via E-BUS communication cable.
- Modules can be daisy-chained for easy installation.
Installation
Mounting
The module includes a Chevron cut plastic snap track mounting base. This base is mounted to a flat surface using a single 1/4" Hex Head Sheet Metal Screw (provided) through the pre-punched center hole. The Reheat Expansion Module then snaps securely onto the track for easy field mounting and servicing.
Environmental Considerations
The Reheat Expansion Module must be installed in an environment that maintains temperatures between -30°F and 150°F, with humidity not exceeding 95% RH (Non-Condensing). It is crucial to protect the module from extreme temperatures, moisture, dust, and dirt to prevent damage to electronic components.
Technical Support
For technical assistance, contact AAON Support at www.aaon.com/contact.