MSI MAG CORELIQUID A15 Series Liquid CPU Cooler

Warranty Information

The warranty term differs from one region to another. To verify the warranty term of the product purchased, please contact MSI's local offices.

Warranty terms and conditions may vary by region. For verification, please refer to your local MSI website or contact local offices.

Packing Contents

The package includes the MAG CORELIQUID A15 240 and MAG CORELIQUID A15 360 liquid CPU coolers. Components typically include the cooler itself (radiator, tubing, pump/block assembly), mounting hardware for various CPU sockets, fans, and a user manual.

Installation

This section details the installation process for different CPU sockets.

Intel 1700 Socket Installation

1. Step 1: Place the backplate (I1) behind the motherboard, aligning it with the mounting holes around the CPU socket.
2. Step 2: Attach the Intel mounting brackets (I2) to the standoffs on the backplate, securing them with screws (I3).
3. Step 3: Apply thermal paste to the CPU (if not pre-applied). Place the CPU cooler block (G) onto the CPU, aligning the mounting posts with the brackets. A red arrow indicates the downward motion.
4. Step 4: Place the mounting brackets (N) onto the cooler block's posts and insert screws (I2) through the brackets into the cooler block.
5. Step 5: Tighten the screws (I2) in a diagonal pattern using a screwdriver to secure the cooler block evenly. Red circular arrows indicate the tightening motion.

Intel 1851 Socket Installation

1. Step 1: Place the backplate (I1) behind the motherboard, aligning it with the mounting holes around the CPU socket.
2. Step 2: Attach the Intel mounting brackets (I2) to the standoffs on the backplate, securing them with screws (I3).
3. Step 3: Apply thermal paste to the CPU. Place the CPU cooler block (G) onto the CPU, aligning the mounting posts with the brackets. A red arrow indicates the downward motion. A zoomed view shows the LGA-1851 offset kit, indicating specific bracket positioning.
4. Step 4: Place the mounting brackets (N) onto the cooler block's posts and insert screws (I2) through the brackets into the cooler block.
5. Step 5: Tighten the screws (I2) in a diagonal pattern using a screwdriver to secure the cooler block evenly. Red circular arrows indicate the tightening motion. For Intel Core Ultra 9 & 7, use screw hole position 2 on the bracket. For Intel Core Ultra 5, use position 1. This ensures optimal cooling performance.

AMD AM5 / AM4 Socket Installation

1. Step 1: Attach the AMD mounting brackets (A1) to the motherboard, aligning them with the CPU socket mounting holes. Red arrows indicate the placement direction.
2. Step 2: Apply thermal paste to the CPU. Place the CPU cooler block (G) onto the CPU, aligning the mounting posts with the AMD brackets. A red arrow indicates the downward motion.
3. Step 3: Place the mounting brackets (N) onto the cooler block's posts and insert screws (I2) through the brackets into the cooler block.
4. Step 4: Tighten the screws (I2) in a diagonal pattern using a screwdriver to secure the cooler block evenly. Red circular arrows indicate the tightening motion.

Radiator Fan Installation

Attach the fans to the radiator using the provided screws. Ensure the fans are oriented correctly for airflow (typically blowing air through the radiator).

Connection

Connect the cooler to the motherboard and system fans.

For motherboards without JAF connector:

Connect the PUMP_FAN cable to the PUMP_FAN header on the motherboard. Connect the ARGB_V2 cable to the ARGB header. Connect the CPU_FAN cable to the CPU_FAN header.

For motherboards with JAF connector:

Connect the PUMP_FAN cable to the PUMP_FAN header. Connect the JAF cable to the JAF header on the motherboard.

Note: It is recommended that users set the fan/pump speed duty to greater than 20%. This product uses ARGB GEN2 LEDs and supports Intel 800 and AMD 800 series JAF_2 or JAF_1 motherboards, compatible with Mystic Light.

Regulatory Notices

CE Conformity

Products bearing the CE marking comply with applicable EU Directives, including RED 2014/53/EU, Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, and RoHS Directive 2011/65/EU. Compliance is assessed using European Harmonized Standards. For regulatory matters, contact MSI-Europe: Eindhoven 5706 5692 ER Son, the Netherlands. For EU General Product Safety Regulation (GPSR) support, contact MSI Computer Europe B.V. via gpsr@msi.com.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. It generates, uses, and radiates radio frequency energy. If interference occurs, users are encouraged to reorient or relocate the receiving antenna, increase separation between equipment and receiver, or connect the equipment to a different circuit. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded interface cables and AC power cord must be used to comply with emission limits.

MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA. Phone: (626) 913-0828. Website: www.msi.com

Chemical Substances Information & Compliance

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006), MSI provides information of chemical substances in products at: https://csr.msi.com/global/index

WEEE Statement

The WEEE symbol indicates that this product cannot be discarded as municipal waste. Users are responsible for disposing of waste electrical and electronic equipment by handing it over to a designated collection point for recycling. Contact local authorities or the shop where the product was purchased for more information.

JIS C 0950

This section refers to Japanese Industrial Standard JIS C 0950, which mandates disclosure of hazardous substances in specific electrical and electronic equipment sold after July 1, 2006. Information is available at: https://csr.msi.com/tw/Japan-JIS-C-0950-Material-Declarations

India RoHS

This product complies with the India E-waste (Management and Handling) Rule 2011, prohibiting lead, mercury, hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers above 0.1% and cadmium above 0.01%, except for specified exemptions.

Türkiye EEE yönetmeliği

Complies with Turkish EEE regulations.

Ukraine Restrictions

Equipment complies with the Technical Regulation on the Restriction of Hazardous Substances in Electrical and Electronic Equipment.

Việt Nam RoHS

Products manufactured by MSI comply with Circular No. 30/2011/TT-BCT regarding temporary limits for certain hazardous substances in electrical and electronic products.

Hazardous Substance Table

Note 1: "Exceeds 0.1 wt %" and "Exceeds 0.01 wt %" indicate the percentage content of the restricted substance exceeds the threshold.

Note 2: "✔️" indicates the percentage content of the restricted substance does not exceed the threshold.

Note 3: "—" indicates the restricted substance is excluded.

This table is compiled according to SJ/T 11364. The presence of hazardous substances in components may vary by model.

Green Product Features

• Reduced energy consumption during use and stand-by.
• Limited use of substances harmful to the environment and health.
• Easily dismantled and recycled.
• Reduced use of natural resources by encouraging recycling.
• Extended product lifetime through easy upgrades.
• Reduced solid waste production through take-back policy.

Environmental Policy

• The product is designed for proper reuse of parts and recycling and should not be thrown away at its end of life.
• Users should contact the local authorized collection point for recycling and disposing of their end-of-life products.
• Visit the MSI website for recycling information and to locate a nearby distributor.
• For information regarding proper disposal, take-back, recycling, and disassembly of MSI products, contact gpcontdev@msi.com.
• Visit https://us.msi.com/page/recycling for recycling information in the US.

Copyright and Trademarks Notice

Copyright © Micro-Star Int'l Co., Ltd. All rights reserved. The MSI logo is a registered trademark of Micro-Star Int'l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. MSI reserves the right to make changes to this document without prior notice.

Technical Support

If a problem arises that cannot be solved by the user guide, contact your place of purchase or local distributor. For further guidance, visit the MSI website for technical guides, BIOS updates, driver updates, and other information at http://www.msi.com. Register your product at http://register.msi.com.