TRIO Lighting 2144701XX Cassio Wall Lamp Installation Guide

Important Safety Instructions

WARNING! Before assembling, please read carefully the safety instructions!

This document contains essential safety information. It is crucial to read and understand all instructions before proceeding with the installation of the TRIO Lighting 2144701XX Cassio wall lamp to ensure safe operation and prevent potential hazards.

(Note: The original document provides safety warnings in multiple languages. The following is a consolidated summary in English.)

• Thoroughly read all safety guidelines before commencing any assembly work.
• Ensure all electrical connections are performed correctly and securely.
• Adhere strictly to all provided instructions to guarantee safety and proper functionality.

Assembly Instructions

Follow these steps to correctly install your TRIO Lighting 2144701XX Cassio wall lamp.

Installation Method A:

Step 1: Securely mount the wall bracket (labeled 1) to the wall using appropriate wall plugs and screws (not supplied). Ensure it is firmly attached.

Step 2: Make the electrical connections. Connect the mains supply wires to the terminals (L for live, N for neutral, and potentially L2) within the connection block (labeled 2). Ensure all connections are tight and properly insulated.

Step 3: Attach the lamp arm assembly to the mounted wall bracket. This typically involves sliding it onto the bracket and securing it with screws (labeled 3 and 4).

Step 4: Screw the light bulb into the socket (labeled 6). Verify that the bulb's wattage does not exceed the maximum limit of 40W.

Step 5: Affix the lampshade (labeled 5) to the lamp arm.

Step 6: The lamp is equipped with an ON/OFF switch for operation.

Installation Method B:

Step 1: Attach the wall bracket (labeled 1) to the wall using suitable wall plugs and screws (not included). Ensure it is stable.

Step 2: Connect the mains electrical wires to the connection block (labeled 2), identifying the live (L), neutral (N), and any additional terminals (L2).

Step 3: Mount the lamp arm assembly onto the wall bracket, securing it with screws (labeled 3 and 4).

Step 4: Connect the power cord (labeled 5), which has a length of 0.5 meters, to your electrical supply.

Step 5: Insert the light bulb into the socket (labeled 8). Do not exceed the maximum recommended wattage of 40W.

Step 6: Attach the lampshade (labeled 7) to the lamp arm.

Step 7: Operate the lamp using the integrated ON/OFF switch.

Step 8: Note the connection point labeled 9, which may relate to internal wiring or switch mechanisms.

Product Specifications

• Model: 2144701XX (Specific model variant may be 214470107 or similar)
• Brand: TRIO Lighting
• Product Type: Wall Lamp
• Electrical Requirements: 230V~, 50Hz
• Bulb Socket: 1x E27
• Maximum Bulb Wattage: 40W
• Cable Length: 0.5 meters
• Environmental Protection: IP 20
• Bulb: Not included
• Control: ON/OFF switch

Manufacturer and Support

Manufacturer: TRIO Leuchten GmbH / TRIO International GmbH

Address: Gut Nierhof 17, D-59757 Arnsberg, Germany

Official Website: www.trio-lighting.com

Product Information & Support: Visit trio-lighting.com/214470107 for more details.

Compliance

The product bears the CE mark, indicating compliance with relevant European Union directives and standards.