TRIO Lighting

Diagram A: Components and Connections

The diagram shows the main components of the lighting fixture. Component 'A' is the main body of the light, and 'B' is the mounting base or canopy. Connections are indicated by numbered points (1, 2, 3, 4, 5).

Point 1 indicates a ceiling or wall mounting point.

Point 2 shows the fixture body being attached to a mounting bracket.

Point 3 illustrates electrical connections: Live (L), Neutral (N), and Earth [earth symbol].

Point 4 shows the fixture being secured.

Point 5 indicates a suspension or connection point.

Diagram B: Step-by-Step Installation

This diagram details the installation process in six steps:

1. Step 1: Shows a ceiling cutout or mounting area with a diameter of 280mm. A mounting bracket is also shown.
2. Step 2: Illustrates attaching the mounting bracket to the ceiling and then fitting the main fixture body into place.
3. Step 3: Depicts connecting the electrical wires (Live, Neutral, Earth [earth symbol]) using a terminal block.
4. Step 4: Shows the fixture being secured to the mounting bracket using screws.
5. Step 5: Illustrates the final connection and securing of the fixture.
6. Step 6: Shows the adjustable nature of the fixture, with a rotation range of 0-350 degrees and tilt adjustment indicated by a curved arrow. Dimensions of 5-15mm are also noted, possibly for clearance or adjustment.

Control Options

The fixture offers multiple control modes, indicated by symbols:

• ? A: Primary light function.
• ? B: Secondary light function (if applicable).
• Mode 1 (X1): Control option 1.
• Mode 2 (X2): Control option 2.
• Mode 3 (X3): Control option 3.
• [LED Symbol]: Indicates LED technology.