Hanging Mount Adaptor

Product Overview

This product is used to install the Plastic Camera into the Wall Mount Adaptor (SBP-300WM or SBP-300WM1), Ceiling Mount Adaptor (SBP-300CM) or Parapet Mount Adaptor (SBP-300LM).

Package Contents

• Hanging Mount Adaptor
• SCREW (M4xL10) - 2EA
• SCREW (M4xL14) - 2EA [For XND-6080/8080 Series]

[Diagram Description: The package includes the Hanging Mount Adaptor, two M4xL10 screws, and two M4xL14 screws specifically for the XND-6080/8080 Series.]

Installation Precautions

• Ensure the installation location can support at least 4 times the total weight of the Hanging Mount Adaptor, Camera, and the associated Wall/Ceiling/Parapet Mount Adaptor.
• The Hanging Mount Adaptor can be connected to a 1-1/2" PF screw-thread pipe or directly to the Wall/Ceiling/Parapet Mount Adaptor.

Installation Steps

1. Insert the Hanging Mount Adaptor into a 1-1/2" PF screw-thread (female) pipe or the Wall/Ceiling/Parapet Mount Adaptor (SBP-300WM, SBP-300WM1, SBP-300CM, or SBP-300LM). Turn clockwise to secure.

   [Diagram Description: Shows the adaptor being screwed onto a pipe or another adaptor. A note emphasizes ensuring the pipe/adaptor reaches the end of the adaptor's thread for a secure fit to prevent loosening and potential damage.]

2. Install the Hanging Mount Adaptor onto the camera. Ensure the adaptor is inserted in the correct direction.

   [Diagram Description: Illustrates the adaptor being attached to the camera body. 'A type' (representative model SND-6084) and 'B type' (representative model PND-0809R-00) are depicted.]

Product Specifications

[Diagram Description: The "Product Outline" shows a circular adaptor with dimensions indicated: 1-1/2" PF Tap, 50 mm (1.97 inches), and 138.9 mm (5.47 inches).]