Product Overview
The SBP-300KM1 and SBP-300KMW1 are corner mount adaptors designed to install a Wall Mount Adaptor in a corner of a wall. The SBP-300PM1, SBP-300PMW1, and SBP-300PMB1 are pole mount adaptors used to install a Wall Mount Adaptor onto a pole with a diameter of at least 80 mm.
Package Contents
For SBP-300KM1 / SBP-300KMW1:
- Stainless Bolt (M10xL30) - 4 pieces
- Spring Washer - 4 pieces
- Plain Washer - 4 pieces
For SBP-300PM1 / SBP-300PMW1 / SBP-300PMB1:
- Stainless Bolt (M10xL30) - 4 pieces
- Stainless Steel Mount Strap - 2 pieces
- Spring Washer - 4 pieces
- Plain Washer - 4 pieces
Corner Mount Adaptor
Pole Mount Adaptor
Installation Precautions
- Ensure the installation location can support at least 4 times the total weight of the Corner/Pole Mount Adaptor, Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- Each anchor bolt used must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
- This product is designed to use M10 Anchor Bolts (Nuts) for installation.
- If installing the Corner Mount Adaptor on a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
Installation: SBP-300KM1/SBP-300KMW1
- Mark and drill 8 holes into the Corner Mount Adaptor where you will insert the Anchor Bolts or Nuts (M10). Fasten the Corner Mount Adaptor with the Bolts, plain and spring washers.
- Insert the cables through the Corner Mount Adaptor.
- Use the provided Bolts, Spring Washers, and Plain Washers to mount the Wall Mount Adaptor onto the product.
For more information, refer to the installation guide of the Wall Mount Adaptor.
Diagram Description: The diagram illustrates the installation of the Corner Mount Adaptor onto a wall corner. It shows the adaptor being secured with anchor bolts, plain washers, and spring washers. Cables are passed through the adaptor. The Wall Mount Adaptor (SBP-300WM) is then attached to the Corner Mount Adaptor. Key components depicted are: Plain Washer, Spring Washer, Anchor Bolt, Wall Mount Adaptor (SBP-300WM), and Corner Mount Adaptor.
Installation: SBP-300PM1/SBP-300PMW1/SBP-300PMB1
- Select a pole for installation and confirm the installation height.
- Use the Stainless Steel Mounting Strap to secure the Pole Mount Adaptor to the pole.
- Insert the cables through the Pole Mount Adaptor.
- Use the provided Bolts, Spring Washers, and Plain Washers to mount the Wall Mount Adaptor onto the product.
For more information, refer to the installation guide of the Wall Mount Adaptor.
Diagram Description: The diagram illustrates the installation of the Pole Mount Adaptor onto a pole. It shows the adaptor being secured to the pole using a Stainless Steel Mounting Strap. Cables are passed through the adaptor. The Wall Mount Adaptor (SBP-300WM) is then attached to the Pole Mount Adaptor. Key components depicted are: Plain Washer, Spring Washer, Anchor Bolt, Wall Mount Adaptor (SBP-300WM), Stainless Steel Mounting Strap, and Pole Mount Adaptor.
