Amax LED Mushroom Ceiling Fixture
LED "R" Mushroom Series
⚠️ IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
SAFETY PRECAUTIONS:
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A CERTIFIED ELECTRICIAN FAMILIAR WITH LOCAL MUNICIPAL CODES AND REQUIREMENTS.
- CAUTION - RISK OF ELECTRIC SHOCK. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
- WARNING, THIS IS A LINE VOLTAGE MODEL AND DOES NOT AND CANNOT USE A DRIVER.
- LINE VOLTAGE MODELS ALREADY HAVE A POWER SUPPLY CHIP BUILT INTO THE LED ARRAY.
TOOLS AND MATERIALS REQUIRED:
- ? Phillips Screwdriver
- ✂️ Wire Cutters
- ? Pliers
- Wiring supplies as required by electrical code
INSTALLATION
-
Remove plastic lens by gently rotating and lifting.
[Diagram: Lens being rotated and lifted off the fixture base.]
-
Place mounting screws (included) in electrical box screwing in halfway.
[Diagram: Mounting screws inserted into an electrical outlet box.]
-
Using wire nuts to connect ground wire (green) from fixture and LED board to ground wire from electrical box. Connect black wire from fixture to black wire from electrical box. Connect white wire from fixture to white wire from electrical box.
[Diagram: Wiring connections showing ground, black, and white wires being connected with wire nuts.]
-
Attach fixture to mounting screws, turn fixture counter-clockwise to lock.
[Diagram: Fixture being attached to the mounting screws and rotated to lock.]
-
Secure fixture by tightening mounting screws.
[Diagram: Mounting screws being tightened to secure the fixture.]
-
To install acrylic plastic lens, hold lens up to fixture, and rotate until notches in lens line up with tabs in fixture. Continue rotating until lens stops.
[Diagram: Lens being aligned with tabs on the fixture and rotated to secure.]
This LED Light is compatible to be dimmed by Leviton# 6672, 6633, 6631, 6633-P; Lutron# DVCL-153P, MACL-153M, CTCL-153P, TGCL-153P. Dimming levels may vary by different dimmer.
