AMAX LED CONVEX EDGELESS SERIES
Product Models: LED-CP5D, LED-CP7D, LED-CP9D
IMPORTANT SAFETY INSTRUCTIONS
WARNING: INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS. READ ALL INSTRUCTIONS.
SAFETY PRECAUTIONS:
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- CAUTION-RISK OF ELECTRIC SHOCK. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
PACKAGE CONTENTS
| PART | DESCRIPTION | QTY |
|---|---|---|
| A | LED disc light | 1 |
| B | Mounting screws | 2 |
| C | Wire nut | 3 |
| D | Mounting plate | 1 |
FLUSH MOUNT
Visual representation of parts: Part A is a circular LED disc. Part B shows two screws. Part C shows three wire nuts. Part D shows a circular mounting plate with screw holes.
TOOLS AND MATERIALS REQUIRED:
- Phillips Screwdriver
- Wire Cutters
- Pliers
- Wiring supplies as required by your local Provincial or State Electrical code
INSTALLATION INSTRUCTIONS
-
Step 1: Prior to installation, install the mounting plate into the electrical junction box with mounting screws. Drive screws completely to the end of the junction box.
Diagram shows a junction box with a mounting plate being secured by screws.
-
Step 2: Connect supply wires to wires on fixture with wire nuts. Connect white to white, black to black, and copper wire to copper wire as grounding connection.
Diagram shows the wiring connections: Ground wire to copper wire, Black wire to black wire, White wire to white wire, using wire nuts.
-
Step 3: Complete the installation by pushing the fixture springs towards the opening in the mounting plate installed on the junction box.
Diagram shows the fixture being pushed into place, with springs engaging with the mounting plate.
DIMMER COMPATIBILITY
This LED light is compatible to be dimmed by LEVITON# 6633, LEVITON# 6672, LEVITON# 6631, LEVITON# 6674, LUTRON# DVCL-153P, LUTRON# MACL-153M, LUTRON# CTCL-153P, LUTRON# CTCL-153PD, LUTRON# TGCL-153P.
Dimmer compatible for 120V line volt. 277V is non-dimmable. Dimming levels will vary by dimmer.
