Hernest Ivar 40" 5-Drawer Chest

Overview

1. Check and ensure you have received all packages and necessary parts.
2. Prepare adequate assembly space. We recommend using pads or cardboard to prevent the floor from scratches.
3. Read the instructions to familiarize yourself with the assembly requirements. Allow sufficient time and have someone available to assist you if needed.
4. Place all hardware on a soft surface for easy identification.
5. The seller is not responsible for any damage or injury caused by improper assembly or use.
6. If you need further assistance, please contact us through service@hernest.com

Caution

1. Children must not assemble this product. During assembly, keep small parts away from children as swallowing or inhaling them could be fatal.
2. Do not allow children to stand, climb, or play on the product, as it may tip over and cause serious injury.
3. Keep plastic packaging bags away from children to prevent risks of suffocation.
4. Avoid sharp objects and corrosive chemicals to prevent product damage or personal injury.

Material Specifications

Solid Wood

Natural grains, scars, and color variations are inherent in real wood, which contribute to its unique beauty. Slight color changes may occur under different lighting and angles, due to variations in wood grain and light intensity.

Marble and Engineered Stone

Each marble and engineered stone piece has a unique pattern. Due to the nature of the materials, the pattern may differ from the one you see when purchasing.

Exploded Views

A diagram showing the exploded view of the 5-drawer chest. The main components are labeled with letters for reference in assembly.

Component Parts

A list of all components included in the package, with quantities and labels.

Component A: x1

Hardware

1x2 Anti-Tipping Hardware

A diagram illustrating the anti-tipping hardware and its components.

Install your new product with care, following the instructions step-by-step. Do not skip any steps. Carefully distinguish between left and right components. Do not over-tighten screws, as this may damage the product.

Tools You May Need

You might need a screwdriver (+/-) to complete this assembly.

?️ ? ⚙️

Persons and Time Needed For Assembly

Assembly Directions

Diagrams illustrating the steps for attaching the anti-tip kit to the furniture and the wall.

Step 1

Anti-Tip Kit

Tool Required: Philip Screw Driver (not provided)

Diagram showing how to attach the anti-tip strap to the top of the furniture and then to the wall using screws.

Components:

A: Anti-tip strap component (x1)

B: Wall anchor (x1)

C: Screw for furniture (x1)

D: Screw for wall (x1)

E: Wall plug (x1)

Diagram showing the attachment points on the furniture and wall.

Troubleshoot

Possible Issues During Assembly:

• The two boards can't be aligned at the same level.
• Holes on the bards and poles are not aligned, so screws can't be installed.

Recommended Solution:

Please slightly loosen all screws and adjust the bards. Because the diameter of the holes on the pipes is 23 mm larger than that of bolts, the position of the boards can be adjusted.

If it is still doesn't work after adjustment, please contact us for more solutions.

Side-mounted Rail Disassembly and Assembly Instructions

Diagrams illustrating the process of disassembling and assembling side-mounted drawer rails.

Drawer Removal:

Pull up and unlatch the clips (Push down the other rail)

Open the drawer to its maximum position, press down or pull up the unlatching clips on both rails, then remove the drawer.

Drawer Assembly:

Align and properly mate the two rail components on the drawer, push the drawer forward into the rails until it reaches the back.

Repeatedly (2–4 times) push and pull the drawer to check if it slides smoothly. If not, disassemble the drawer and re-install.

Diagram showing how to align the rails for drawer assembly.

Use and Care

• Leave it vacant for half a month before use, maintain good ventilation to eliminate any odor.
• Place items steadily, heavier items should be placed at the bottom to avoid tipping over. For high temperature or frozen items, please put a heat-resistant pad underneath.
• Do not directly push or drag hard objects on the furniture to avoid scratching the surface.
• Avoid prolonged exposure to sunlight or heat sources to prevent discoloration or fading.
• Pay attention to moisture prevention to avoid mold. Keep the furniture placed steadily to prevent breakage or loosening.
• Please educate children to stay away from the glass sharp corners of the furniture.
• When opening and closing doors or drawers, handle them gently and check the screws regularly to tighten them.
• Use a soft dry cloth to dust, a slightly damp cloth to clean the surface, avoid abrasive cleaners.