GZJXMJJ Assembly Instructions & Care Guide

Illustrations in this guide are for reference only and may differ slightly from the actual product.

Before You Start

Overview

Check and ensure all packages and necessary parts are received.
Prepare adequate assembly space. Use pads or cardboard to prevent floor scratches.
Read instructions to familiarize yourself with assembly requirements. Allow sufficient time and have assistance if needed.
Place all hardware on a soft surface for easy identification.
The seller is not responsible for damage or injury caused by improper assembly or use.
For further assistance, contact service@hernest.com.

Caution

Children must not assemble this product. Keep small parts away from children during assembly to prevent swallowing or inhaling, which could be fatal.
Do not allow children to stand, climb, or play on the product, as it may tip over and cause serious injury.
Keep plastic packaging bags away from children to prevent suffocation risks.
Avoid sharp objects and corrosive chemicals to prevent product damage or personal injury.

Material Specifications

Solid Wood

Natural grains, scars, and color variations are inherent in real wood, contributing to its unique beauty. Slight color changes may occur under different lighting and angles due to variations in wood grain and light intensity.

Marble and Engineered Stone

Each marble and engineered stone piece has a unique pattern. Due to the nature of the materials, the pattern may differ from the one seen when purchasing.

Installation Guide

Component Parts

Part A: Armchair body (x1)

Part B: Legs/Base components (x4)

Hardware

Part C: Screws (x4)

Part D: Allen key/Tool (x1)

Install your new product with care, following instructions step-by-step. Do not skip any steps. Carefully distinguish between left and right components. Do not over-tighten screws or use power tools, as this may damage the product.

Tools You May Need

You might need a screwdriver (+/-) to complete this assembly.

Persons and Time Needed For Assembly

Box: 1

People: 2

Time: 15 minutes

Difficulty: [Visual representation of difficulty level]

Assembly Directions

Step 1

Attach the four base components (B) to the underside of the armchair body (A) using the screws (C) and the provided tool (D).

Step 2

Rotate the assembled base 180 degrees.

Step 3

Finished! Carry out the following checks:

Have you tightened all the screws?
Are the levelers aligned with and making contact with the ground?

Troubleshoot

Product Category	Fault	Cause Analysis	Handling Method
Wood furniture	Door opening is not flexible	The furniture is not leveled	Use items to level the furniture.
	Inflexible opening of drawer	The door hinges should be adjusted properly.	Adjust door hinges and apply lubricating oil.
	Loose component connection	Overload or deformation	Reduce weight, adjust guide rails, lubricate.
	Minor scratches	Friction with hard or sharp objects	The pole part should be coated with an appropriate amount of glue, then re-install or tighten the screws. Use a brush to apply similar pigment ink along wood grain to the scratches, then wipe off the excess.
	Corrosive stains	Accidentally stained with chemical solvents such as nail polish, nail polish remover, etc.	Wipe them with a dry cotton cloth immediately.

Possible Issues During Assembly:

The two boards can't be aligned at the same level. Diagrams illustrating alignment issues: [Correct alignment symbol], [Misaligned symbol], [Misaligned symbol].

Holes on the bards and poles are not aligned, so screws can't be installed. Diagram showing misaligned holes and screws: [Misaligned symbol].

Usage and Maintenance

Use and Care

Leave the furniture vacant for half a month before use, maintaining good ventilation to eliminate any odor.
Place items steadily; heavier items should be placed at the bottom to avoid tipping over. For high temperature or frozen items, use a heat-resistant pad underneath.
Do not directly push or drag hard objects on the furniture to avoid scratching the surface.
Avoid prolonged exposure to sunlight or heat sources to prevent discoloration or fading.
Pay attention to moisture prevention to avoid mold. Keep the furniture placed steadily to prevent breakage or loosening.
Educate children to stay away from the glass sharp corners of the furniture.
When opening and closing doors or drawers, handle them gently and check the screws regularly to tighten them.
Use a soft dry cloth to dust, a slightly damp cloth to clean the surface, and avoid abrasive cleaners.

Other

Help Center

Treat your furniture with care and follow the maintenance guidelines. In return, your furniture will provide lasting comfort and support. For additional inquiries or assistance, please contact us at https://www.hernest.com/help.

Inquiry ❓
Assembly issue ?
Missing parts ❌
Returns & Refunds ?

Email: service@hernest.com

We look forward to seeing you again soon.