Quick Start Guide

Important Tips

When using for the first time, follow RoboVac to observe and resolve any problems that may occur.

1. Remove the sticker next to the power switch, and the foam blocks beside the bumper before use.
2. Ensure the Charging Base is correctly connected to AC power. The LED indicator on the Charging Base should be SOLID WHITE.
3. Always keep the Charging Base plugged in; otherwise, RoboVac will not automatically return.
4. Fully charge RoboVac before use. The LED indicator on RoboVac breathes orange while charging and is solid blue when fully charged.
5. Remove power cords and small objects from the floor that may entangle RoboVac. Use the supplied cable ties to organize your wires and power cords.
6. Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very dark-colored rugs or high-pile rugs thicker than 1.02 in/26 mm, as they may cause RoboVac to malfunction.
7. Keep RoboVac away from spaces lower than 2.87 in/73 mm to prevent it from getting stuck. If necessary, place a physical barrier to block off problem areas.
8. Keep RoboVac away from wet areas.
9. RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove these objects if possible.
10. Anti-drop sensors prevent RoboVac from tumbling down stairs and steep drops. They may work less effectively if dirty or used on reflective/very dark-colored floors. It is recommended to place physical barriers to block off areas where RoboVac may fall.
11. Place physical barriers in front of fireplaces and areas that may cause damage to RoboVac if entered.

App Connection

Download the EufyHome app and follow the instructions in the app to complete the Wi-Fi connection. You can then control RoboVac via this app. Refer to the Owner's Manual for details.

Available on the App Store and Google Play.