Human Touch PC086 Serenity Plus Zero-Gravity Recliner

Welcome to Human Touch®

Where heat, waves, weightlessness and beauty come together lies serenity—The Perfect Chair Serenity® Plus, to be exact. This amazing zero-gravity recliner seamlessly integrates earth's natural elements and the healing arts of the Far East into an amazingly luxurious top-grain leather chair that soothes tired, aching muscles, elevating the body to a new state of comfort and relaxation.

Inspired by the neutral body posture chaise position developed by NASA to support astronauts' ascent into orbit, the Perfect Chair's frame ergonomics put the body in a virtually weightless position that physicians recommend as the healthiest way to sit. Within the chair lies an equally stunning advancement—jade stones that radiate far-infrared heat up to three inches into muscle tissue to create healing warmth that can be felt long after you leave the chair. Add to that full-body, gentle-wave therapy and you've reached the perfect bliss. Or, Serenity, as we call it.

To ensure that you don't overlook any of your chair's features, and that you use it safely, read this manual carefully. Then sit back, relax, and enjoy!

Important Safety Instructions

Read all instructions before using this appliance.

DANGER: To reduce the risk of electrical shock

Always unplug this product from the electrical outlet immediately after using and before cleaning.

WARNING: To reduce the risk of burns, fire, electric shock or injury to persons:

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
• Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
• Close supervision is necessary when this product is used by, on, or near children, invalids, or disabled persons. Keep children away from extended foot support (or other similar parts).
• Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return this product to a service center for examination and repair.
• Do not carry this appliance by supply cord or use cord as a handle.
• Always keep the power cord away from heated surfaces.
• Never operate this product with the air openings blocked. Keep the air openings free of lint, hair, and the like.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
• To disconnect, turn all controls to the OFF position, then remove plug from outlet.
• Do not use on unexplained calf pain.
• Do not use this product when standing on a damp floor, or when any part of the body is in contact with plumbing or any similar ground.
• Do not use this product if noise above normal sound is heard.
• Do not stand on or in appliance. Use only while seated.
• Use heated surfaces carefully. May cause serious burns. Do not use over insensitive skin areas or in the presence of poor circulation. The unattended use of heat by children or incapacitated persons may be dangerous.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Safety Precautions

• Comfortable clothing is recommended while using this product.
• If you feel any abnormal discomfort during the operation of this product, turn off the power immediately and do not use the product. Consult your physician.
• Do not pull on the AC cord.
• When using this product after it has been in storage, check to see that the product is operating properly prior to use.
• Always confirm that there are no obstacles behind the product and that there is sufficient space to recline.

SAVE THESE INSTRUCTIONS

• This product is designed for personal in-home use. Commercial use will void warranty.
• Do not attempt to repair this product yourself.

Servicing of Double Insulated Products

In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product, nor is a means for grounding to be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system, and is to be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace. A double-insulated product is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED." The symbol [square within a square] is also able to be marked on the product.

Get Ready

Unpack the box

Contents include:

• Chair
• Backrest pad
• Plastic headrest frame protector
• Headrest frame
• Headrest pillow

Incline the chair

1. Plug the chair into an appropriate power source.
2. Push down on the recline lever to incline the chair to the upright position.
3. Unplug the chair.

Your Human Touch Perfect Chair requires some simple assembly. Simply fold the seat pad forward, slide the backrest pad onto the chair frame, connect the heat and air connectors, reinstall the seat pad, and you're done!

Partially remove the seat pad

1. Detach the flaps that secure the top of the seat pad to the chair frame.
2. Lift the seat pad upward and fold it forward, to expose the chair canvas.
3. Open the chair canvas zipper to expose the air hose connectors.

Install the headrest frame

1. Using a Phillips-head screwdriver, remove the two screws from the back of the headrest frame.
2. With the headrest frame positioned so that the headrest can tilt forward, slide the two ends of the headrest frame into the open tube ends of the chair frame.
3. Replace the two headrest frame screws and secure them using a Phillips-head screwdriver.

Place the plastic headrest frame protector

Place the plastic protector over the headrest frame and pull it down over the backrest frame as far as it will go (this protects the backrest pad from getting caught on the frame during assembly).

Install the backrest pad

1. Standing behind the chair, gently slide the backrest pad downward onto the chair frame, using a side-to-side motion.
2. Smooth the flap on the bottom rear of the backrest pad upward against the chair frame to secure it using the hook-and-loop fasteners.
3. From the front of the chair, connect the backrest heater cable connector to the corresponding connector on the chair base.
4. Connect the backrest air hose connector to the corresponding connector from the seat pad.
5. After connecting the backrest air hose connector to the corresponding seat air connector, secure the two connectors together using the two provided zip ties.
6. Close the chair canvas zipper.

Reinstall the seat pad

1. Fold the seat pad forward into position.
2. Wrap the bottom flaps on the top edge of the seat pad around the chair frame, then secure them using the hook-and-loop fasteners.
3. Smooth the top flaps on the top edge of the seat pad up into the backrest to secure the two pads together using the hook-and-loop fasteners.
4. Tuck the flaps on each side of the seat pad between the seat and the armrest, then smooth them against the bottom of the chair to secure them using the hook-and-loop fasteners.

Attach the headrest pillow

Attach the headrest pillow to the headrest using the hook and loop fasteners.

Take a Seat

Plug it in

Plug the chair into an appropriate power source.

Adjust the Recline Angle

Before adjusting the recline angle, be sure there is nothing located directly behind or beneath the chair. Gently push down on the electric recline lever to recline, or pull up on the lever to adjust the angle forward. Release the lever when you reach the desired angle. The chair automatically stops when you reach the maximum recline or the full upright position.

NOTE: Lean back against the backrest before reclining the chair. Do not put any extra pressure on the footrest while reclining, as this may prevent the footrest from properly deploying and locking.

When adjusting the footrest up and down, you may notice a slight bumping sensation. This is caused by the footrest locking mechanism, and is perfectly normal.

Adjust the Headrest

While seated, reach up with both hands and grasp both sides of the headrest. You will feel the rigid frame beneath the soft headrest pad. Grasping the rigid frame, tilt the headrest forward or backward for maximum comfort. The headrest remains in this position until you adjust it again.

NOTE: From time to time your headrest screws may need tightening. DO NOT attempt to remove the backrest pad without disconnecting the heater cable and air hoses - doing so will likely cause permanent damage to the heater wiring. See Fig. 7 on Page.

Getting out of the Perfect Chair

While seated, pull up gently on the electric recline lever until the backrest automatically stops in a full upright position and the footrest automatically stops in a vertical position (the backrest stops before the footrest). Use the armrests for support when getting up from the chair.

Take Control

Now add heat and gentle-wave air. With the touch of a button, transform the perfect seating experience into true serenity. Choose from three different heat levels, enjoy soothing full-body gentle-wave therapy, or combine them. The choice is yours—and it's all at your fingertips.

Jade

Toggle between high (III), medium (II) and low (I) far-infrared heat.

NOTE: The jade stones continue to heat slowly as long as the heat is running. The heat automatically turns off after 30 minutes, as this is the recommended duration. Wait 30 minutes before starting another session.

Wave

Turn the soothing gentle-wave therapy on or off.

Strategically positioned jade stones and air cells provide targeted full-body relief.

HT Wellness Council Insight

"The Jade found in the Serenity® chair consists of many of the same elements found in the human body. Because they emit similar frequencies, the vibration from the jade stones goes deeper into the cells while the far-infrared heat penetrates the muscle layer. The result is better circulation, increased oxygen in the blood and fast recovery from pain and disease."

— Dr. Hoon Kim, Ph.D., Licensed Acupuncturist and Medical Qi-Gong Practitioner

Care and Maintenance

To keep your product working and looking its best, please follow these simple care guidelines.

WARNING:

1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. When cleaning the controller or power switch, use a dry cloth only. Never use a damp cloth to clean the controller or power switch.
3. Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not fade prior to using the solution on the entire product surface.
4. Do not use benzene, thinner or any other solvents on your product.

Cleaning Code Standard: W

To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum extension. SofSuede® products can also be brushed with a suede brush. If your product becomes dirty, use a water-based upholstery cleaner only. To treat stains, spot clean with an upholstery shampoo or a mild detergent foam.

Maintenance and Repair:

1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication or servicing is required.
2. Your chair should only be serviced by an authorized service center.

Use and Storage Environment:

1. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled and that the unit be placed in an environment free of dust and moisture.
2. Do not store near heat or open flame.
3. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
4. Do not use or store in extreme temperatures; product stored in cold temperatures may require 48 hours at room temperature to function properly.
5. Product should be used and stored in an environment with non-condensing humidity ranging from 10 to 80%; excessive humidity will damage the mechanics.

Miscellaneous:

1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.

Specifications

*Specifications are subject to change without prior notice.