Hama TV Wall Bracket
Model Numbers: 00108716, 00108717
Product Overview
Thank you for choosing a Hama product. This TV wall bracket is designed for securely mounting flat-panel displays for private, non-commercial household use. It is intended for indoor use only.
Specifications
| Feature | Specification |
|---|---|
| Maximum Load Capacity | 00108716: 30 kg 00108717: 35 kg |
| Screen Size | 00108716: 81.0 - 165.0 cm (US: 32" - 65") 00108717: 81.0 - 191.0 cm (US: 32" - 75") |
| Depth | 5.2 cm |
| Angle | -15°/+5° (device dependent) |
| Wall Mounting Plate Dimensions | 00108716: 44.5 x 10.5 cm 00108717: 64.5 x 10.5 cm |
| Mounting Holes (VESA Standard) | 00108716: 400x400 00108717: 600x400 |
Required Tools
- Screwdriver ?
- Drill ड्रिल
- 10 mm drill bit
- Wrench ? (13 mm)
- Level ?
Installation Kit Contents
The installation kit typically includes:
- Wall plugs (e.g., Fischer)
- Screws of various sizes (e.g., M8x50, Ø10x50, M6, M8, M4)
- Washers
- Spacers
- Mounting hardware for the bracket itself (e.g., F1)
Note: The exact contents may vary. Some parts (like E1, E2) might only be included in specific model numbers (e.g., 00108716).
Safety Instructions
- Warning: Ensure the wall can support the weight. Check for hidden wires or pipes before drilling. ⚠️
- Use appropriate wall plugs for your wall type (supplied plugs are for concrete/solid brick).
- Never use excessive force during mounting.
- If unsure, consult a qualified technician.
- Do not mount above areas where people might stand.
- Regularly check the bracket's security (at least every three months).
- Do not exceed the maximum load capacity or dimensions.
- Ensure symmetrical loading.
- Maintain safety clearance around the mounted load.
- Remove the load immediately if the product is damaged.
Installation Steps
Installation typically involves the following steps:
- Prepare the Wall: Choose a suitable location on the wall, ensuring it's free of electrical wires, water, or gas pipes. Mark drilling points according to the bracket's dimensions.
- Drill Holes and Insert Wall Plugs: Drill holes at the marked points and insert the appropriate wall plugs.
- Mount the Wall Plate: Attach the wall plate securely to the wall using the provided screws.
- Attach Support Arms to TV: Mount the TV support arms to the back of your television using the appropriate screws and spacers if needed. Ensure they are level.
- Hang TV on Wall Plate: Carefully hang the TV with attached support arms onto the wall plate and secure them with screws.
- Adjust and Secure: Adjust the tilt angle as desired and tighten all screws securely.
Note: Installation is best done with two people. Always ensure the TV is securely fastened. ℹ️
Setting and Maintenance
Adjust the tilt angle by loosening and retightening the side mounting screws. Regularly check the bracket's security and clean with water or mild household cleaners.
Warranty Disclaimer
Hama GmbH & Co KG is not liable for damages resulting from improper installation, use, or failure to follow instructions and safety notes.
| hama.com
| hama.com
