Soundstream 2013 Product Catalog
Listen and Feel
Reference Amplifiers
Soundstream's Reference amplifiers are designed to deliver unparalleled audio performance, combining advanced technology with superior craftsmanship. These amplifiers feature robust power supplies, sophisticated circuitry, and high-quality components to ensure exceptional sound reproduction and reliability.
Key Features:
- Non-regulated power supplies with massive capacitance for smooth power delivery.
- Class G monoblock models with fully regulated power supplies for optimized power output across different impedances.
- Refined PCBs with advanced techniques to minimize distortion and noise.
- Discrete regulators for pre-amps and crossovers.
- High current bipolar transistors and MOSFETs for superior power handling.
- Balanced inputs and outputs to eliminate ground loops and improve signal-to-noise ratio.
- Triple Darlington bi-polar junction transistor driver and output stages.
- 2 ounce PCB copper for high current and low trace impedance.
- Sophisticated preamp/crossover sections with variable high-pass, low-pass, and subsonic filters for precise tuning.
| Model | RMS Power @ 4Ω | RMS Power @ 2Ω | RMS Power @ 4Ω Bridged | RMS Power @ 1Ω | Remote Gain Control | Dimensions (h"w") |
|---|---|---|---|---|---|---|
| REF2.370 | 110 x 2 | 185 x 2 | 370 x 1 | - | Y | 2.25"x9.875" |
| REF2.640 | 190 x 2 | 320 x 2 | 640 x 1 | - | Y | 2.25"x13.5" |
| REF4.400 | 70 x 4 | 100 x 4 | 200 x 2 | - | Y | 2.25"x9.875" |
| REF4.760 | 115 x 4 | 160 x 4 | 380 x 2 | - | Y | 2.25"x13.5" |
| REF4.920 | 145 x 4 | 215 x 4 | 460 x 2 | - | Y | 2.25"x16" |
| REF5.1000 | 95 x 4 & 270 x 1 | 135 x 4 & 460 x 1 | 270 x 2 | - | Y | 2.25"x20.5" |
| REF1.500 | - | 500 | - | 1,000 | Y | 2.25"x14" |
| REF1.1000 | - | 1,000 | - | 1,500 | Y | 2.25"x18" |
Tarantula Amplifiers
The Tarantula amplifiers offer a clean and classy design with overcompensating power supplies for maximum performance. They utilize high-efficiency Class D technology for monoblock subwoofer amplifiers and reliable Class A/B circuitry for full-range models, providing a hybrid solution for both sound quality and power.
Key Features:
- High-efficiency Class D technology for monoblock models.
- Reliable Class A/B circuitry for full-range models.
- Hybrid Class D & Class A/B 5-channel model available.
- Variable 12dB High, Low, & Subsonic Crossovers.
- Band-Pass Crossovers on 4-channel and 5-channel models.
- Input Source Selector on 4-channel and 5-channel models.
- Variable 12dB 50Hz Bass Boost on 1-channel models.
- Dash Mounted Remote Gain Control on 5-channel and 1-channel models.
| Model | RMS Power @ 4Ω | RMS Power @ 2Ω | RMS Power @ 4Ω Bridged | RMS Power @ 1Ω | Remote Gain Control | Dimensions (W x H) |
|---|---|---|---|---|---|---|
| TA2.160 | 55 x 2 | 80 x 2 | 160 x 1 | - | Included | 9.875" |
| TA2.400 | 135 x 2 | 200 x 2 | 400 x 1 | - | Included | 13.25" |
| TA4.280 | 50 x 4 | 70 x 4 | 140 x 2 | - | Included | 12.00" |
| TA4.480 | 90 x 4 | 120 x 4 | 240 x 2 | - | Included | 15.25" |
| TA4.720 | 120 x 4 | 180 x 4 | 360 x 2 | - | Included | 17.00" |
| TA5.1250 | 75 x 4 + 325 x 1 | 125 x 4 + 500 x 1 | 250 x 2 + 750 x 1 (1Ω) | - | Included | 18.25" |
| TA1.600D | - | 250 x 1 | - | 600 x 1 | Included | 10.50" |
| TA1.1000D | - | 375 x 1 | - | 1,000 x 1 | Included | 13.00" |
| TA1.2000D | - | - | - | 2,000 x 1 | Included | 18.00" |
| TA1.3000D | - | - | - | 3,000 x 1 (.5Ω) | Included | 20.50" |
Tarantula NANO Amplifiers
The Tarantula NANO amplifiers offer high power in compact chassis, utilizing efficient Full-Range Class D topology and SMT technology. These amplifiers are designed to meet the needs of smaller, more economical vehicles without sacrificing audio performance.
Key Features:
- Efficient Full-Range Class D topology.
- SMT technology for compact size.
- Comprehensive preamp adjustments.
- 2-Ohm Stereo, 4-Ohm Bridged Multi-Channel capability.
- 1-Ohm Stable Class D Monoblock design.
- Three-Way Protection Circuitry.
- Delayed On/Off Circuit.
- Tri-Mode Capable (2/4/5 channel models).
- Variable 12dB High, Low, & Subsonic Crossovers.
- Band-Pass Crossovers (4ch & 5ch.).
- Input Source Selector (4ch. & 5ch.).
- Variable 12dB 50Hz Bass Boost (1ch.).
- Dash Mounted Remote Gain Control (5ch. & 1 ch.).
- Direct Wire 8ga. Power & Speaker Terminals.
- Oga Reducer Terminal Included.
| Model | RMS Power @ 4Ω | RMS Power @ 2Ω | RMS Power @ 4Ω Bridged | RMS Power @ 1Ω | Remote Gain Control | Dimensions (W x H) |
|---|---|---|---|---|---|---|
| TN2.600D | 200 x 2 | 300 x 2 | 600 x 1 | - | Included | 6.825" |
| TN4.900D | 150 x 4 | 225 x 4 | 450 x 2 | - | Included | 8.875" |
| TN5.950D | 85 x 4 + 270 x 1 | 130 x 4 + 430 x 1 | 260 x 2 + 430 x 1 | - | Included | 12.625" |
| TN1.1200D | - | 660 x 1 | - | 1,050 x 1 | Included | 10.50" |
Rubicon Amplifiers
The Rubicon amplifiers boast a gorgeous, aggressive blue hairline finish, representing Soundstream's commitment to strong quality and identity. These amplifiers utilize the most modern technology available, offering superior performance and sound reproduction.
Key Features:
- Midnight Blue Finish w/ Brushed Accents.
- Class A/B Full Range Monoblocks Available.
- 12dB Variable High, Low, & Subsonic Crossovers.
- 6dB & 12dB 50Hz Bass Boost.
- 2 & 4 channel Models with Band-Pass Crossovers.
- 180° Phase Control for 5 Channel & Monoblocks.
- Class D models are Strapable w/ 2Ω loads.
- High Level or 200mV-6V Low Level Input.
- Direct 4 ga. Power & 8 ga. Speaker Terminals.
- Dash Mount Remote Gain Control Included.
| Model | RMS Power @ 4Ω | RMS Power @ 2Ω | RMS Power @ 4Ω Bridged | RMS Power @ 1Ω | Remote Gain Control | Dimensions (W x H) |
|---|---|---|---|---|---|---|
| RUB2.250 | 75 x 2 | 125 x 2 | 250 x 1 | - | Included | 9.875" |
| RUB2.600 | 180 x 2 | 300 x 2 | 600 x 1 | - | Included | 13.875" |
| RUB4.500 | 75 x 4 | 125 x 4 | 250 x 2 | - | Included | 12.00" |
| RUB4.600 | 100 x 4 | 150 x 4 | 300 x 2 | - | Included | 15.5" |
| RUB5.800 | 70 x 4 + 200 x 1 | 115 x 4 + 340 x 1 | 230 x 2 + 340 x 1 | - | Included | 19.75" |
| RUB1.1000D | - | 400 x 1 | - | 800 x 1 | Included | 13.25" |
| RUB1.1600D | - | 475 x 1 | - | 1,100 x 1 | Included | 15.75" |
| RUB1.2500D | - | - | - | 1,700 x 1 | Included | 20.75" |
Stealth Amplifiers
Stealth amplifiers offer a small footprint and are stackable, featuring Class A/B circuitry for pure, uncolored sound reproduction. They are designed for those who prioritize sound quality in a compact package.
Key Features:
- Stackable Chassis for Multiple Amplifier Applications.
- Anodized Black Chassis w/ Chrome Accents.
- Double Sided SMD Circuit Boards.
- Detent Crossovers & Gain Adjustments.
- 12dB Variable High, Low, & Subsonic Crossovers.
- 12dB Variable or Switched Bass Boost.
- 2 & 4 channel Models with Band-Pass Crossovers.
- High Level or 200mV-5V Low Level Input.
- Direct 4 ga. Power & 8 ga. Speaker Terminals.
- Dash Mount Remote Gain Control Included.
| Model | RMS Power @ 4Ω | RMS Power @ 2Ω | RMS Power @ 4Ω Bridged | RMS Power @ 1Ω | Remote Gain Control | Dimensions (W x H) |
|---|---|---|---|---|---|---|
| STL2.350 | 100 x 2 | 175 x 2 | 350 x 1 | - | Included | 9.625" |
| STL2.560 | 150 x 2 | 260 x 2 | 560 x 1 | - | Included | 11.25" |
| STL4.320 | 50 x 4 | 80 x 4 | 160 x 2 | - | Included | 9.625" |
| STL4.500 | 80 x 4 | 125 x 4 | 250 x 2 | - | Included | 11.25" |
| STL6.620 | 60 x 4 + 100 x 2 | 80 x 4 + 150 x 2 | 160 x 2 + 300 x 1 | - | Included | 11.25" |
| STL1.600D | - | 400 x 1 | - | 600 x 1 | Included | 9.625" |
| STL1.1200D | - | 600 x 1 | - | 1,200 x 1 (1Ω) | Included | 11.25" |
Picasso Amplifiers
The Picasso amplifiers feature a brushed black aluminum finish with accent lighting, offering Class A/B full range and Class D monoblock options. They include variable crossovers and high-level inputs for versatile system integration.
Key Features:
- Brushed Black Aluminum Finish w/ Accent Lighting.
- 4-ohm Bridged, 2-ohm Stereo Class A/B Full Range.
- 2-ohm Stable Class A/B Monoblock.
- 1-ohm Stable Class D Monoblocks.
- Variable 12dB High, Low, & Subsonic Crossovers.
- High Level or 200mV-6V Low Level Input.
- 4g Power & 8ga Speaker Terminals.
- 6/12dB 45Hz Bass Boost.
- 180° Phase Switch (D models).
- Class D Strappable w/ 2-ohm Load.
- Dash Mount Remote Gain Control Included.
| Model | RMS Power @ 4Ω | RMS Power @ 2Ω | RMS Power @ 1Ω | Remote Gain Control | Dimensions (W x H) |
|---|---|---|---|---|---|
| P1.210 | 130 x 1 | 210 x 1 | 600 x 1 | Included | 7.75" |
| P1.600D | 240 x 1 | 400 x 1 | 1,000 x 1 | Included | 10.25" |
| P1.1000D | 400 x 1 | 750 x 1 | 1,200 x 1 | Included | 11.75" |
| P1.1200D | 500 x 1 | 900 x 1 | 1,500 x 1 | Included | 12.75" |
| P1.1500D | 600 x 1 | 1,000 x 1 | 1,800 x 1 | Included | 16" |
| Model | RMS Power @ 4Ω | RMS Power @ 2Ω | RMS Power @ 4Ω Bridged | Dimensions (W x H) |
|---|---|---|---|---|
| P2.150 | 50 x 2 | 75 x 2 | 150 x 2 | 7" |
| P2.200 | 70 x 2 | 100 x 2 | 200 x 2 | 8" |
| P2.400 | 125 x 2 | 200 x 2 | 400 x 2 | 12" |
| P4.140 | 25 x 4 | 35 x 4 | 70 x 2 | 6.5" |
| P4.260 | 45 x 4 | 65 x 4 | 130 x 2 | 11" |
| P4.500 | 80 x 4 | 125 x 4 | 250 x 2 | 13" |
| P4.800 | 125 x 4 | 200 x 4 | 400 x 2 | 19" |
| P5.610 | 60 x 4 + 170 x 1 | 85 x 4 + 270 x 1 | 170 x 2 + 270 x 1 | 18.75" |
Picasso NANO Amplifiers
The Picasso NANO amplifiers are compact and powerful, designed to fit in virtually any location. They utilize tried-and-tested MOSFET power supplies and tenacious Class D circuitry for reliable performance.
Key Features:
- Small Compact 4.75" Wide Chassis.
- 4-ohm Bridged/2-ohm Stereo Class D Full Range.
- 2-Ohm Stable Class D Monoblocks.
- MOSFET PWM Power Supply.
- 80Hz 12dB HP or LP Crossover (2/4 ch.).
- 50-250Hz Variable 12dB LP Crossover (mono).
- 10-50Hz Variable 12dB Subsonic Crossover (mono).
- 12dB 45Hz Bass Boost (mono).
- 200mv-6V Low Level Input Sensitivity.
- High Level Input.
- Dash Mount Remote Gain Control.
| Model | RMS Power @ 4Ω | RMS Power @ 2Ω | RMS Power @ 4Ω Bridged | Remote Gain Control | Dimensions (W x H) |
|---|---|---|---|---|---|
| PN2.350D | 115 x 2 | 175 x 2 | 350 x 1 | Included | 5.50" |
| PN4.320D | 60 x 4 | 80 x 4 | 160 x 2 | Included | 7" |
| PN4.520D | 100 x 4 | 130 x 4 | 260 x 2 | Included | 9.25" |
| PN5.540D | 50 x 4 + 170 x 1 | 75 x 4 + 240x 1 | 150 x 2 + 240 x 1 | Included | 9.25" |
| PN1.450D | - | 260 x 1 | - | Included | 8" |
| PN1.650D | - | 400 x 1 | - | Included | 9.25" |
Synthesis Digital Signal Processor
The Synthesis is a unique DSP processor offering 24bit/96kHz digital audio processing for full system control. It integrates seamlessly with factory radios and allows for fine-tuning of aftermarket speakers and amplifiers.
Key Features:
- 24bit/96kHz digital audio processor.
- 6 channel high level inputs for seamless integration with factory radios.
- 8 channel outputs for creating multiple audio platforms.
- Laptop-controlled software for easy tuning (MAC and PC compatible).
- 172MHz-28/56bit DSP.
- 24bit ADC/DAC.
- 96kHz sample rate.
- 114db DR ADC converters.
- 114db DR DAC converters.
- 8V RCA Output/ Balanced.
- 31 Band Graphic EQ.
- 9 Band Parametric EQ.
- Time Alignment.
- USB 2.0 interface, Plug&Play, No driver required.
- WinXP/Vista/7 & MAC Compatible.
- Firmware upgradable for future expansion.
- Balanced OR Unbalanced RCA Inputs.
- 4 Way crossover.
iCQ Integration Modules
iCQ modules allow for seamless integration of aftermarket systems with factory radios, retaining key OEM features like steering wheel controls and navigation. They provide high-level inputs, line drivers, and RCA outputs for flexible system configuration.
Key Features:
- Up to 8ch. OEM Integration Module.
- Multi-Channel High Level Inputs on Direct Wire Connectors.
- Low Noise Floor Line Driver w/ Independent Level Control.
- Amplified Remote Turn-on by Signal Sense or Direct Input.
- Auxiliary Source High Level Input.
- Dash Mount Remote Level Control Included.
| Model | Input/Output Channels | Subwoofer Input | Auxiliary Input | Remote Gain Control | Dimensions (W x H) |
|---|---|---|---|---|---|
| iCQ.2 | 2 x 2 | Yes | Yes | Included | 4.50" |
| iCQ.4 | 4 x 4 | Yes | Yes | Included | 6.75" |
| iCQ.6 | 6 x 6 | Yes | Yes | Included | 8.00" |
| iCQ.8 | 8 x 8 | Yes | Yes | Included | 9.00" |
Reference R1 Subwoofers
The Reference R1 subwoofers represent a leap in subwoofer performance, featuring a unique design with a concealed inverted surround and a larger diameter concave primary cone. Acoustic canceling tuned channels virtually eliminate undesirable cone-radiated upper octave frequencies for clean, un-colored sound reproduction.
Key Features:
- Cast Aluminum Soundstream Reference R1 Frame.
- Clandestine Inverted Roll Polyether Foam Surround.
- Oversized Concave IMPP Primary Cone.
- Non-Transfer Cellulose Pulp Sub-Cone.
- Acoustic Canceling Polyvinyl Chloride Gasket.
- Extreme Temperature DVC Voice Coil.
- Oversaturated Zinc Plated T-Yoke & Top Plate.
- 317oz Motor Magnet Assembly Weight.
- Sub-Cone Assembly & T-Yoke Venting.
- 12ga Compression Wire Terminals.
- Suspension Integrated Tinsel Leads.
- Dual Spider Suspension.
- Patent Pending.
| Model | RMS Power (watts) | Efficiency (1w/1m) | Voice Coil Configuration | Mounting Depth | Optimum Sealed ft³ | Optimum Ported ft³ |
|---|---|---|---|---|---|---|
| R1.122 | 850 | 82.90 | 2.5" DVC 2Ω | 7.875" | 1.00 | 2.00 |
| R1.124 | 850 | 83.10 | 2.5" DVC 4Ω | 7.875" | 1.00 | 2.00 |
Reference R3 Subwoofers
The Reference R3 subwoofers utilize a woven fiberglass composite cone for ultimate strength and less elasticity, combined with a heavy epoxy soak and pulp paper backing for superior sonic qualities. They feature extended excursion polyurethane surrounds and heat-dissipating venting for improved power handling.
Key Features:
- Woven Fiberglass Composite Cone.
- 100% OFC 4-Layer Voice Coil.
- Extended Excursion Polyurethane Surround.
- Back Plate & T-Yoke Venting.
| Model | RMS Power (watts) | Efficiency (1w/1m) | Voice Coil Configuration | Mounting Depth | Optimum Sealed ft³ | Optimum Ported ft³ |
|---|---|---|---|---|---|---|
| R3.8 | 500 | 80.70 | 2.00" DVC 2Ω | 5.25" | 0.75 | 1.25 |
| R3.10 | 700 | 82.10 | 2.5" DVC 4Ω | 6.00" | 1.00 | 1.50 |
| R3.12 | 800 | 84.66 | 2.5" DVC 4Ω | 6.875" | 1.50 | 2.25 |
| R3.15 | 900 | 90.20 | 2.5" DVC 4Ω | 7.625" | 2.75 | 2.75 |
Reference RF.8W Subwoofer
The RF-8W subwoofer is engineered for phenomenal audiophile-grade performance without a high cost. It utilizes simple, classic materials like non-pressed pulp paper cones and foam surrounds for the best sound quality.
Key Features:
- Non-pressed pulp paper cones.
- Foam surrounds.
- Conex suspension.
- Great fit in a factory 8" subwoofer location.
| Model | RMS Power (watts) | Efficiency (1w/1m) | Voice Coil Configuration | Mounting Depth | Optimum Sealed ft³ | Optimum Ported ft³ |
|---|---|---|---|---|---|---|
| RF.8W | 180 | 83.00 | 2.00" DVC 4Ω | 4.00" | 0.60 | 0.75 |
Tarantula Subwoofers
The Tarantula T7 subwoofers are designed for performance, featuring a high BL motor, heat-extracting aluminum dust cap, and a lumpy cone for optimal sound reproduction. These subwoofers prioritize performance over aesthetics.
Key Features:
- High BL motor.
- Aluminum heat-sink dust cap.
- Nickel Plated 8ga. Compression Wire Terminals.
- 2.5" 430° Voice Coil on Aluminum Former.
- Die-Cast Aluminum Frame w/ Textured Finish.
- Polyether Foam Surround.
- Dual Poly-Cotton Suspension Spiders.
- 170oz. Strontium Ferrite Magnet.
- Vented T-Yoke Back-plate.
- Re-cone Kit Available.
| Model | RMS Power (watts) | Efficiency (1w/1m dB) | Voice Coil Configuration | Mounting Depth | Optimum Sealed Box | Optimum Ported Box |
|---|---|---|---|---|---|---|
| T7.104 | 700 | 83.5 | 2.5" DVC 4Ω | 5.875" | 0.75 | 1.50 |
| T7.102 | 700 | 83.1 | 2.5" DVC 2Ω | 5.875" | 0.75 | 1.50 |
| T7.124 | 800 | 85.3 | 2.5" DVC 4Ω | 6.625" | 1.00 | 2.00 |
| T7.122 | 800 | 86.8 | 2.5" DVC 2Ω | 6.625" | 1.00 | 2.00 |
| T7.154 | 900 | 90.0 | 2.5" DVC 4Ω | 7.825" | 2.00 | 2.50 |
| T7.152 | 900 | 80.0 | 2.5" DVC 2Ω | 7.825" | 2.00 | 4.00 |
Rubicon Subwoofers
The Rubicon subwoofers feature a closed cell polyurethane surround for strength and flexibility, along with back plate and T-yoke venting to dissipate heat. The overcast stitched cone assembly ensures superior adhesion between the cone and surround.
Key Features:
- Closed Cell Polyurethane Surround.
- Back Plate & T-Yoke Venting.
- Overcast Stitched Cone Assembly.
- 100% OFC 4-Layer Voice Coil.
| Model | RMS Power (watts) | Efficiency (1w/1m) | Voice Coil Configuration | Mounting Depth | Optimum Sealed ft³ | Optimum Ported ft³ |
|---|---|---|---|---|---|---|
| RUB.102 | 450 | 82.80 | 2" DVC 2Ω | 6.00" | 0.75 | 1.50 |
| RUB.104 | 450 | 87.30 | 2" DVC 4Ω | 6.00" | 0.75 | 1.50 |
| RUB.122 | 500 | 86.04 | 2" DVC 2Ω | 6.625" | 1.25 | 2.00 |
| RUB.124 | 500 | 85.67 | 2" DVC 4Ω | 6.625" | 1.25 | 2.00 |
| RUB.152 | 550 | 85.15 | 2" DVC 2Ω | 7.50" | 1.50 | 3.00 |
| RUB.154 | 550 | 86.97 | 2" DVC 4Ω | 7.50" | 1.50 | 3.00 |
Stealth-13 Subwoofer
The Stealth-13 subwoofer is the shallowest woofer on the market, designed to play in a tiny enclosure without losing low bass extension. It is perfect for applications in doors, under seats, foot wells, and trucks.
Key Features:
- Proprietary Cast Aluminum Basket.
- Inverted Motor Assembly.
- Solid Aluminum Cone.
- 2" Mounting Depth.
- 5" Voice Coil.
- Semi-Circular Frame Venting.
- Low Bass In No Space!
| Model | RMS Power (watts) | Efficiency (1w/1m dB) | Voice Coil Configuration | Mounting Depth | Optimum Sealed Box | Optimum Ported Box |
|---|---|---|---|---|---|---|
| STEALTH-13 | 200 | 80.82 | 5" SVC 4Ω | 2 | 0.75 | 1.00 |
Picasso Subwoofers
The Picasso subwoofers feature injection molded polypropylene cones, NBR rubber surrounds, and 2" SVC 4-Ohm voice coils. They are designed for high-quality audio reproduction in a compact package.
Key Features:
- Injection Molded Polypropylene Cone.
- Overcast Stitched Cones.
- NBR Rubber Surround.
- 2" SVC 4-Ohm Voice Coil.
- Embossed Dust Cap.
- Frame Voice Coil Venting.
- Vented T-Yoke & Back Plate.
| Model | RMS Power (watts) | Efficiency (1w/1m) | Voice Coil Configuration | Mounting Depth | Optimum Sealed ft³ | Optimum Ported ft³ |
|---|---|---|---|---|---|---|
| PC0.8 | 250 | 87.49 | 2" SVC 4Ω | 4.00" | 0.50 | 1.00 |
| PC0.10 | 300 | 86.40 | 2" SVC 4Ω | 5.00" | 0.75 | 1.50 |
| PC0.12 | 350 | 88.41 | 2" SVC 4Ω | 6.00" | 1.00 | 1.75 |
Picasso THIN Subwoofers
The Picasso THIN subwoofers are designed for tight spaces, featuring a shallow mounting depth and a 1-piece polypropylene dome cone. They utilize high-strength neodymium magnets for powerful audio output.
Key Features:
- Shallow Mount High Efficiency Component Set.
- Low Resonance Polycarbonate Frame.
- 1" Mounting Depth!
- 1-Piece Polypropylene Dome Cone.
- High Strength Neodymium Magnets.
- 1" Titanium Inverted Dome Tweeter.
- Passive 12dB Crossover Included.
- +/- 3dB Tweeter Attenuation Switch.
- PTC Tweeter Protection.
| Model | RMS Power (watts) | Efficiency (1w/1m) | Voice Coil Configuration | Mounting Depth | Optimum Sealed ft³ | Optimum Ported ft³ |
|---|---|---|---|---|---|---|
| PXW-10T | 180 | 86.50 | 2.00" DVC 2Ω | 2.875" | 0.50 | 1.00 |
| PXW-12T | 160 | 86.70 | 2.00" DVC 4Ω | 2.875" | 1.00 | 1.00 |
X3 Amplifiers
The X3 amplifiers are 1-Ohm Stable Class D Competition Amplifiers, designed for SPL competition. They feature non-regulated MOSFET power supplies and strapable Class D monoblocks for extreme power output.
Key Features:
- 1-Ohm Stable Class D Competition Amplifiers.
- Non-regulated MOSFET Power Supply.
- Up to 16V Power & 10V Audio Input.
- Oga Input & 8ga Output Terminals.
- 4ch. Bridgeable w/ 2-Ohm, 1-Ohm Stereo.
- Monoblocks Strapable w/ 2Ω Load.
- 3180 x 12010112dB High/Low Pass Crossovers (4ch).
- 18dB Low-Pass & Subsonic Crossovers (mono).
- Variable 18dB 45Hz Bass Boost.
- 180° Phase Control (mono).
- Remote Gain Control (mono).
| Model | RMS Power @ 4Ω (14.4V, 1% THD) | RMS Power @ 2Ω (14.4V, 1% THD) | RMS Power @ 1Ω (14.4V, 1% THD) | Remote Gain Control | Dimensions (W x H) |
|---|---|---|---|---|---|
| X3.60 | 1,050 x 1 | - | - | Included | 15.75" |
| X3.71 | 1,750 x 1 | - | - | Included | 21.00" |
| X3.2K4 | 250 x 4 | 400 x 4 | - | Included | 23.75" |
XXX Amplifier
The XXX Amplifier is a Class D mono-block SPL Competition Amplifier, winner of multiple trophies. It features a non-regulated MOSFET power supply and strapable Class D monoblocks for extreme power output.
Key Features:
- Class D mono-block SPL Competition Amplifier.
- Non-regulated MOSFET Power Supply.
- Up to 16V Power & 7V Audio Input.
- Oga Input & 8ga Output Terminals.
- 24dB Low-Pass & Subsonic Crossovers.
- 18dB 40-120Hz Bass Boost.
- Remote Gain Control.
- Clear Plexi Glass Bottom Included.
| Model | RMS Power @ 2Ω (14.4V, 5% THD) | RMS Power @ 1Ω (14.4V, 1% THD) | RMS Power @ 2Ω (16V, 5% THD) | RMS Power @ 1Ω (16V, 5% THD) | Dimensions (W x H x D) |
|---|---|---|---|---|---|
| XXX-15000D | 9,360 | 14,800 | 10,400 | 16,800 | 12.75"w x 2.75"h x 32.75"d |
SPLX Subwoofers
The SPLX subwoofers are designed for serious competitors and hard-core fanatics, featuring a higher resonant frequency desirable for many competitors. They are efficient and loud in the main bass range from 40Hz-80Hz.
Key Features:
- Cast Aluminum Frame.
- Dual 2 ohm 3" CCAW Coils.
- Forged & Vented Back Plate.
- Epoxy Coated Spruce Pulp Cone.
- Dual NOMEX Spiders.
- Re-cone Kits Available.
| Model | RMS Power (watts) | Efficiency (1w/1m dB) | Voice Coil Configuration | Mounting Depth | Optimum High Tuning (55Hz) | Optimum Low Tuning (35Hz) |
|---|---|---|---|---|---|---|
| SPLX.122HF | 1,000 | 87.25 | 3" DVC 2Ω | 7" | 3.00 | 3.50 |
| SPLX.152HF | 1,250 | 90.05 | 3" DVC 2Ω | 8.375" | 4.00 | 5.00 |
X3 Subwoofer
The X3 Subwoofer is unique for its extreme power handling and SPL competition capabilities. It features a high-density forged aluminum frame, proprietary asymmetrical S-block foam surround, and a massive 4" CCAW voice coil.
Key Features:
- Extreme Power Handling SPL Competition Subwoofers.
- High Density Forged Aluminum Frame.
- Proprietary Asymmetrical S-Block Foam Surround.
- Massive 4" CCAW Voice Coil on Aluminum Former.
- Tripple Nomex Spider Suspension.
- Epoxy Coated Pulp Paper Cone.
- High BL Triple Stack Motor Assembly.
- Voice Coil Perimeter venting and T-Yoke Vent.
- 8ga Duplex Direct Connection Wire Terminals.
- Glue-less DIY Re-Cone Kit Available.
| Model | Burp Power (watts) | RMS Power (watts) | Efficiency (1w/1m dB) | Voice Coil Configuration | Mounting Depth | Optimum High Tuning (55Hz) |
|---|---|---|---|---|---|---|
| X3.122 | 95V (9kW) | 71V (5kW) | 87.98 | 4" DVC 2Ω | 7.50" | 2.25 |
| X3.152 | 100V (10kW) | - | 92.43 | 4" DVC 2Ω | 8.5" | 3.75 |
| X3.182 | 105V (11kW) | - | 92.9 | 4" DVC 2Ω | 10" | 5.00 |
Reference Components
The Reference Components offer exceptional sound quality, rivaling components costing three times the price. They feature high-grade Neodymium magnets, silk dome tweeters, Kevlar-reinforced pulp paper cones, and advanced crossovers for a superior listening experience.
Key Features:
- Highest grade Neodymium magnets.
- 1" tweeter with silk surround for smooth response.
- 6.5" midbass with Kevlar-reinforced pulp paper cone.
- 2.5" midrange with aluminum cone and dustcap.
- Crossovers at 400Hz and 4kHz.
- PTC switch for tweeter protection.
- 5-way L-Pad for tweeter level adjustment (+4dB to -4dB).
| Size & Type | Power Handling (watts) | System Efficiency | Top Mount Depth |
|---|---|---|---|
| 6.5"/2.5" 3-way | 100w | 87dB | 2.625" |
Stealth Components
The Stealth components offer a shallow mount design with high efficiency, featuring a low resonance polycarbonate frame and a 1-piece polypropylene dome cone. They are designed for compact installations without compromising sound quality.
Key Features:
- Shallow Mount High Efficiency Component Set.
- Low Resonance Polycarbonate Frame.
- 1" Mounting Depth!
- 1-Piece Polypropylene Dome Cone.
- High Strength Neodymium Magnets.
- 1" Titanium Inverted Dome Tweeter.
- Passive 12dB Crossover Included.
- +/- 3dB Tweeter Attenuation Switch.
- PTC Tweeter Protection.
| Size & Type | Power Handling (watts) | System Efficiency | Top Mount Depth |
|---|---|---|---|
| 6.5" 2-way | 80w | 94dB | 1" |
Tarantula Components
The Tarantula components feature a woven fiber woofer cone, forge cast aluminum frame, and a 1" horn loaded Teteron/silk dome tweeter. They are designed for high-performance audio reproduction with a 12dB crossover and tweeter attenuation.
Key Features:
- Woven Fiber Woofer Cone.
- Forge Cast Aluminum Frame.
- 1" Voice Coil on Aluminum Former.
- Direct Connect Wire Terminals.
- 1" Horn Loaded Teteron/Silk Dome Tweeter.
- Machined Aluminum Tweeter Housing.
- Flush or Surface Mounting Tweeter.
- 12dB Crossover w/ Tweeter Attenuation.
- Frequency Response: 50-22kHz.
| Size & Type | Power Handling (watts) | System Efficiency | Top Mount Depth |
|---|---|---|---|
| 6.5" 2-way | 140w | 93dB | 2.75" |
Picasso Components
The Picasso components feature polypropylene injection cones, NBR rubber surrounds, and 1" Teteron dome tweeters. They include a passive crossover and a pivoting flush mount tweeter for versatile installation.
Key Features:
- Polypropylene Injection Cone.
- Solid Aluminum Phase Plug.
- NBR Rubber Surround.
- 1" Voice Coil on Aluminum Former.
- Quick Disconnect Terminals.
- Conex Spider Suspension.
- 1" Teteron Dome Tweeter.
- Pivoting Flush Mount Tweeter.
- Passive Crossover Included.
- Tarantula Spider Grill Included.
- Frequency Response: 60-20kHz.
| Size & Type | Power Handling (watts) | System Efficiency | Top Mount Depth |
|---|---|---|---|
| 6.5" 2-way | 120w | 92dB | 2.625" |
Arachnid Components
The Arachnid components feature polypropylene injection cones, NBR rubber surrounds, and 1" voice coils on aluminum formers. They include a passive crossover and a speaker grill for a complete audio solution.
Key Features:
- Polypropylene Injection Cone.
- NBR Rubber Surround.
- 1" Voice Coil on Aluminum Former.
- Quick Disconnect Terminals.
- Conex Spider Suspension.
- 1" Flush Mount Dome Tweeter.
- Passive Crossover Included.
- Speaker Grill Included.
- Frequency Response: 70-20kHz.
| Size & Type | Power Handling (watts) | System Efficiency | Top Mount Depth |
|---|---|---|---|
| 6.5" 2-way | 80w | 92dB | 2.50" |
Tarantula Full Range Speakers
The Tarantula Full Range speakers feature black zirconium coated cones, ferro fluid cooling, 1-inch silk dome tweeters, and progressively slanted surrounds for superior sound quality. They offer the sound quality of a component system in a standard coaxial size.
Key Features:
- Black Zirconium coated cones.
- Ferro fluid cooling.
- 1-inch silk dome tweeters.
- Progressively slanted surrounds.
- Optional Bi-Amp Operation.
- 1" Swivel Silk Dome Tweeter.
- PTC Tweeter Protection.
- Passive Crossovers Included.
- 3 Ohm Impedance.
- 2-Way Crossovers Included with all models.
| Size and Configuration | RMS Power (watts) | Efficiency (1w/1m dB) | Mounting Depth |
|---|---|---|---|
| 6" x 9" 2-way | 150w | 90dB | 3.25" |
| 6.5" 2-way | 120w | 90dB | 2.75" |
| 5"x 7" 2-way | 130w | 90dB | 2.50" |
| 5.25" 2-way | 100w | 89dB | 2.375" |
| 4"x6" 2-way | 100w | 89dB | 2.125" |
| 4" 2-way | 85w | 80dB | 2.00" |
Rubicon Full Range Speakers
The Rubicon Full Range speakers feature Nomex composite cones, 1" Teteron/silk dome tweeters, and butyl rubber surrounds for enhanced audio performance. They are designed for high-quality sound reproduction.
Key Features:
- Nomex Composite Cone.
- 1" Teteron/Silk Dome Tweeter.
- 1" Kapton Voice Coil.
- Butyl Rubber Surround.
- Nomex Spider Suspension.
- Quick Disconnect Terminals.
| Size and Configuration | RMS Power (watts) | Efficiency (1w/1m dB) | Mounting Depth |
|---|---|---|---|
| 6"x9" 2-way | 130w | 91dB | 3.25" |
| 6.5" 2-way | 90w | 90dB | 2.25" |
| 5"x7" 2-way | 110w | 89dB | 2.25" |
| 5.25" 2-way | 75w | 88dB | 2.25" |
| 4" 2-way | 65w | 88dB | 2.00" |
Arachnid Full Range Speakers
The Arachnid Full Range speakers feature polypropylene injection cones, NBR rubber surrounds, and 1" voice coils on aluminum formers. They are designed for high-quality audio reproduction with a 2-way crossover included.
Key Features:
- Polypropylene Injection Cone.
- NBR Rubber Surround.
- 1" Voice Coil on Aluminum Former.
- Quick Disconnect Terminals.
- Conex Spider Suspension.
- 1" Mylar Tweeter.
- Tarantula Speaker Grill Included.
- 4-Ohm System Impedance.
- 2-Way Crossovers Included with all models.
| Size and Configuration | RMS Power (watts) | Efficiency (1w/1m dB) | Mounting Depth |
|---|---|---|---|
| 6"x9" 3-way | 100 | 92.00 | 3.25" |
| 6.5" 2-way | 60 | 92.00 | 1.75" |
| 5"x7" 3-way | 60 | 92.00 | 2.625" |
| 5.25" 2-way | 50 | 92.00 | 2.25" |
| 4" 2-way | 40 | 92.00 | 1.75" |
Pro Audio Tweeters
Soundstream's Pro Audio Tweeters are designed for high-frequency audio reproduction, featuring various diaphragm types and sizes for optimal sound dispersion and clarity.
Key Features:
- Various diaphragm sizes and types (Aluminum, Composite).
- High power handling capabilities.
- Wide frequency response.
- High efficiency for maximum sound output.
| Model | MAX Power Handling | Diaphrgam Size/Type | Impedance | Frequency Response | Efficiency (1w/1m) | Mounting Depth |
|---|---|---|---|---|---|---|
| SST-05 | 100w | 1" Aluminum | 4-Ohm | 4kHz-20kHz | 107dB | 2.125" |
| SST-20 | 90w | 2" Aluminum | 8-Ohm | 3kHz-20kHz | 105dB | 2.25" |
| SST-22 | 100w | 2" Aluminum | 4-Ohm | 3kHz-20kHz | 107dB | 2.25" |
| SPT-30 | 100w | 2" Composite | 4-Ohm | 4kHz-20kHz | 105dB | 2.25" |
| SPT-35 | 100w | 2" Composite | 4-Ohm | 4kHz-20kHz | 107dB | 2.50" |
| SPT-200 | 70w | 1.75" Aluminum | 8-Ohm | 3kHz-20kHz | 109dB | 2.25" |
| SPT-205 | 100w | 1" Aluminum | 4-Ohm | 4kHz-20kHz | 105dB | 2.25" |
| SPT-300 | 70w | 1.75" Aluminum | 4-Ohm | 3kHz-20kHz | 105dB | 4.00" |
| SPT-305 | 100w | 3" Aluminum | 4-Ohm | 3kHz-20kHz | 107dB | 2.25" |
| SPT-325 | 140w | 3" Aluminum | 4-Ohm | 2.5lHz-20kHz | 105dB | 3.25" |
Compression Drivers
Soundstream's Compression Drivers are engineered for high-output audio reproduction, featuring titanium diaphragms and high efficiency for maximum sound pressure levels.
Key Features:
- Titanium Diaphragms for clarity and durability.
- High power handling capabilities.
- Wide frequency response.
- High efficiency for maximum sound output.
| Type | Diaphrgam Type | Tweeter | MAX Power Handling | Impedance | Frequency Response | Efficiency (1w/1m) |
|---|---|---|---|---|---|---|
| SCT.340 | Tweeter | Titanium | 50w | 8-Ohm | 1.5kHz-20kHz | 104dB |
| SCT.440 | Tweeter | Titanium | 65w | 8-Ohm | 1.3kHz-20kHz | 108dB |
| SCT.600 | Tweeter | Titanium | 120w | 4-Ohm | 1kHz-20kHz | 106dB |
| SMD.200 | Midrange | Composite | 100w | 4-Ohm | 3kHz-20kHz | 108dB |
| SMD.202 | Midrange | Composite | 100w | 4-Ohm | 4kHz-20kHz | 105dB |
Tweeters
Soundstream offers a variety of tweeters, including horn-loaded titanium dome, PEI dome, and soft dome tweeters, designed for high-frequency audio reproduction with excellent clarity and dispersion.
Key Features:
- Various diaphragm types (Titanium, PEI, Soft Dome).
- Horn-loaded designs for enhanced sound projection.
- Flush or surface mounting options.
- Passive crossovers included.
- Ferro fluid cooling for improved power handling.
- Neodymium magnets for powerful magnetic field.
| Model | Rated Input Power | Impedance | Freq. Resp. | SPL |
|---|---|---|---|---|
| TWT.2 | 120W | 4 ohm | 3KHz - 22KHz | 94dB |
| TWT.5 | 110W | 4 ohm | 2KHZ-21KHZ | 97dB |
| TWS.1 | 110W | 4ohm | 3KHz - 20KHz | 93dB |
| TWT.6 | 110W | 4ohm | 3KHz - 20KHz | 93dB |
| TWS.3N | 110W | 4 ohm | 2KHZ-21KHZ | 94dB |
| TWS.4 | 110W | 4 ohm | 5KHZ-25KHZ | 95dB |
Equalizers
Soundstream's equalizers offer advanced audio tuning capabilities, including graphic and parametric EQ adjustments, subwoofer level control, and selectable crossovers for precise sound customization.
Key Features:
- 1/2 DIN Graphic and Parametric EQ options.
- Subwoofer Level Control.
- Selectable Low-Pass Filters (32Hz, 64Hz, 125Hz).
- Variable Bass Boost (20-70Hz).
- High headroom switching power supply for clean signal.
- Low noise Bi-FET Op-Amps for pristine audio.
- Multiple EQ bands with +/- 18dB boost/cut.
- Frequency response up to 100kHz.
| Model | Type | Features | Output Signal Voltage | THD | Signal-to-Noise Ratio | Dimensions (w"d"h") |
|---|---|---|---|---|---|---|
| MPQ-7B | 7-Band Graphic EQ | Subwoofer Level Control, Selectable Low-Pass Filter, Fade Control | 8V | 0.05% | 115dB | 7"x4.25"x1.125" |
| MPQ-7XO | Dual Channel Multi-Band Graphic EQ | Variable Bass Boost, Subsonic Filter, Fade Control | 8V | 0.05% | 115dB | 7"x4.25"x1.125" |
| MPQ-5XO | 3-Band Parametric EQ | Subwoofer Level Control, Variable Subsonic Filter, Fade Control | 10V | 0.005% | 110dB | 7"x3.625"x1.125" |
| MPQ-4US | 4-Band Graphic EQ | USB/SD Input, Subwoofer Level Control, Variable Subwoofer Low-Pass Crossover, Fade Control | - | 0.05% | 110dB | 7"x4.375"x1.125" |
Bass Processors
Soundstream's Bass Processors are designed to enhance and reconstruct bass frequencies, offering features like parametric bass equalization, subsonic filters, and remote controls for precise bass management.
Key Features:
- Digital Bass Reconstruction Processor.
- Parametric Bass Equalizer with variable frequency sweep and Q width.
- PWM Subsonic Filter with variable control.
- Low Level RCA Input/Output.
- Signal Sense Remote Turn-on.
- Optional Remote Turn-On Input.
- Max Output Level: 13.5 volt.
- Balanced Input Noise Rejection: 60 dB.
- Frequency Response: 10Hz - 100KHz.
- THD: 0.002% - 0.003%.
- S/N Ratio: 130dB - 132dB.
| Model | Features |
|---|---|
| BX-22i | High Tolerance SMD Technology, All Aluminum Chassis, Parametric Bass Equalizer, Variable Frequency Sweep, Variable Q Width, Variable PWM Subsonic Filter, Low Level RCA Input/Output, Signal Sense Remote Turn-on, Optional Remote Turn-On Input. |
| BX-20Z | Max Bass Control, Dash Mount Remote Control, PFM Subsonic Filter & Bass Level Control, Illuminated logo and knobs, Chrome Logo Plate, Bass Restoration Lighted Display, Parametric Bass Control, PFM Subsonic Filter, Balanced Inputs, Bass Output Control. |
| BX-15 | Max Bass Control, PWM High Head Room Power Supply, Balanced Input Noise Rejection: 60 dB, Frequency Response: 10Hz 100KHz, Dash Mount Remote Control, PFM Subsonic Filter & Bass Level Control, Illuminated logo and knobs, Brushed Aluminum Case & Handles, Bass Restoration Lighted Display, Parametric Bass Control, PFM Subsonic Filter, Balanced Inputs, Bass Output Control. |
| BX-12 | Max Bass Control, PWM High Head Room Power Supply, Frequency Response: 10Hz 100KHz, Dash Mount Remote Control, Bass Restoration Lighted Display, Parametric Bass Control, PFM Subsonic Filter, Balanced Inputs, Bass Output Control. |
| BX-10X | Max Bass Control, PWM High Head Room Power Supply, Frequency Response: 10Hz 100KHz, Dash Mount Remote Control, Bass Restoration Lighted Display, Parametric Bass Control, PFM Subsonic Filter, Balanced Inputs, Bass Output Control. |
| BX-10 | Max Bass Control, PWM High Head Room Power Supply, Frequency Response: 10Hz 100KHz, Dash Mount Remote Control, Bass Restoration Lighted Display, Parametric Bass Control, PFM Subsonic Filter, Balanced Inputs, Bass Output Control. |
Power Management
Soundstream's Power Management products, including capacitors and power distribution blocks, are designed to ensure a stable and clean power supply for your audio system, maximizing performance and reliability.
Key Features:
- Capacitors with various Farad ratings for energy storage.
- LED voltage meters for monitoring power supply.
- Hybrid power capacitors for enhanced performance.
- Power distribution blocks for organized wiring.
| Model | Type | Features |
|---|---|---|
| SCX-1.5 | 1.5 Farad Power Capacitor | 12-16 DC Input Voltage, Red LED Voltage Meter. |
| SCX-2 | 2 Farad Power Capacitor | 12-16 DC Input Voltage, Blue LED Voltage Display, Chrome Plated Chassis, Bolt Post for Ring Terminal. |
| SCX-4 | 4 Farad Power Capacitor | 12-16 DC Input Voltage, Blue LED Voltage Display, Chrome Plated Chassis, Bolt Post for Ring Terminal. |
| SC-8F | 8 Farad Power Capacitor | 12-16 DC Input Voltage, Blue LED Voltage Display, Chrome Plated Chassis, Bolt Post for Ring Terminal. |
| SC-15F | 15 Farad Hybrid Power Capacitor | 12-16 DC Input Voltage, Blue LED Voltage Display, Oga Power Input w/ 4ga Reducer, Bolt Post for Ring Terminal. |
| SC-20CA | 20 Farad Hybrid Super Capacitor | 12-16 DC Input Voltage, Extruded Aluminum Housing, Volt & Amperage Meter, PCB with Blue LED Display, Charging Status Indicator, 24 Status LEDs, Delayed Amp Turn-on, 0 ga Input and 4 ga output. |
| SC-40CA | 40 Farad Hybrid Super Capacitor | 12-16 DC Input Voltage, Extruded Aluminum Housing, Volt & Amperage Meter, PCB with Blue LED Display, Charging Status Indicator, 24 Status LEDs, Delayed Amp Turn-on, 0 ga Input and 4 ga output. |
Amplifier Installation Kits
Soundstream offers complete DIY installation kits for amplifiers, including various gauge wires, fuses, and accessories to ensure a proper and safe installation.
Key Features:
- Complete D.I.Y. Installation Kits.
- Available in various wire gauges (2AWG, 4AWG, 8AWG).
- Includes appropriate fuses and fuse holders.
- All kits include power wire, ground wire, speaker wire, RCA interconnect cables, and remote turn-on wire.
- Complete installation accessories provided.
| Kit Model | Wire Gauge | Fuse Type |
|---|---|---|
| WK-2G | 2AWG | 100A ANL Fuse |
| WK-4G | 4AWG | 80A M-ANL Fuse |
| WK-44G | 4AWG 4ch. | 80A M-ANL Fuse |
| WK-8G | 8AWG | 60A AGU Fuse |
Bulk Wire Rolls & Individual Accessories
Soundstream provides bulk wire rolls and individual accessories for custom audio system installations, including power/ground wire, speaker wire, twisted pair RCA interconnects, and in-line fuse holders.
Available Products:
- Power/Ground Wire (0AWG, 4AWG, 8AWG).
- Speaker Wire (12ga, 16ga 5-Conductor).
- Twisted Pair RCA Interconnects (3ft, 6ft, 12ft, 17ft, 21ft).
- In-Line Fuse Holders (0AWG, 4AWG, 8AWG).
Ingenix Source Units
Soundstream's INGENIX powered source units feature a proprietary engine with an 800 MHz CPU processor and WIN CE 6.0 operating system for lightning-fast performance. They offer unique feature applications and a user-friendly interface.
Key Features:
- 800 MHz CPU processor & WIN CE 6.0 operating system.
- Full HD quality 800x480 screen resolution.
- Drag-and-drop widget menu for customizable desktop.
- Built-in GPS Navigation with TomTom maps.
- Digital Signal Processing with 5-band equalizer and real-time analyzer.
- 32GB SDHC & USB 2.0 Reader for various media formats.
- Full iPod Control Integration (requires IP-5C).
- Bluetooth V2.1 + EDR Connectivity for hands-free calling and audio streaming.
- Picture-in-Picture (PIP) function for simultaneous video and navigation display.
- Multimedia File Manager for organizing media files.
- Speedometer & Compass using GPS data.
- Dual Zone for Rear Seat or Overhead Entertainment.
- Accepts Axxess Steering Wheel Interface.
- Rear View Camera RCA Input w/ Trigger.
- Digital & Analog TV Tuners Available.
Inteq Source Units
Inteq Source Units offer GPS navigation, iPod/iPhone control, and digital media playback. They feature a user-friendly interface with a drag-and-drop widget menu and support for various media formats.
Key Features:
- GPS turn-by-turn navigation via NAVIBOX-2 (sold separately).
- Control and charge iPod or iPhone via touch screen.
- Digital Media Drive for DVD, MP3/WAV, and MP4/DivX playback.
- Media Player for audio, video, and picture files from SD card or USB.
- Programmable FM/AM Tuner with 18FM/12AM station memory.
- Bluetooth V2.1+EDR for hands-free calling and media playback.
- NAVIBOX-2: Plug-N-Play GPS Module with Navteq maps.
- DTV-3: Digital TV Tuner Receiver.
- KS-1: Desktop Media Player for select Inteq models.
- IC-3: Full Function iPod Integration Cable.
Multimedia Source Units
Soundstream's Multimedia Source Units offer a wide range of features including detachable touch screens, DVD playback, USB/SD card compatibility, Bluetooth connectivity, and iPod integration for a complete in-car entertainment experience.
Key Features:
- Detachable touch screens (7" LCD, 9.3" LCD, 6.5" LCD).
- DVD playback from various formats (DVD-R/RW, CD-R/RW).
- USB 2.0 and SDHC card reader for media playback.
- Bluetooth V2.1+EDR for hands-free calling and A2DP audio streaming.
- Complete iPod Integration with IC-3 cable.
- Rear View Camera Input with trigger.
- 52wx4 MOSFET Speaker Outputs.
- Multi-Region FM Frequency Stepping.
- 800 x 480 Widescreen Resolution.
- 400NIT LED Backlight Brightness.
Digital Media Receivers
Soundstream's Digital Media Receivers offer a variety of features including flip-up LCD touch screens, DVD playback, USB/SD card compatibility, and Bluetooth connectivity for a comprehensive in-car entertainment system.
Key Features:
- Single DIN Digital Media Receivers with flip-up 7" LCD touch screens.
- DVD playback from various formats.
- USB 2.0 and SD/MMC card playback.
- 720p HD Video Playback of MP4, DIVX, AVI & More.
- Audio Playback of MP3, AAC, AC3, & WMA.
- Picture Viewer of JPEG, PNG & GIF.
- ID3 Tag Reading for Track & Artist Information.
- AUX Audio Input for Personal Media Devices.
- 18 FM / 12 AM Station Memory.
- 52w x 4 MOSFET Powered Speaker Level Outputs.
- Multi-Region FM/AM Frequency Stepping.
- 800x480 HD Resolution w/ 400cd/m2 Brightness.
Digital Audio Players
Soundstream's Digital Audio Players offer CD/MP3 playback, AM/FM radio, and SD/USB playback capabilities, providing a versatile audio solution for any vehicle.
Key Features:
- Single DIN CD/MP3 Player with AM/FM & SD/USB Playback.
- Detachable Theft Deterrent Faceplate.
- Playback from DVDR/RW & CDR/RW of MP3, MP4, & DivX.
- Playback from 32GB SD Card or USB of MP3, MP4, & DivX.
- AUX Audio Input for Personal Media Devices.
- 2-Channel 2V Pre-Amp RCA Audio Outputs.
- 52x4 MOSFET Powered Speaker Level Outputs.
- 18FM/12AM Station Memory.
- Custom & Preset EQ Settings.
- Audio Staging Controls.
- Remote Control Included.
DVD Players
Soundstream's DVD Players offer versatile media playback options, including DVD, MP4, MP3, and DivX formats, along with SD card and USB playback capabilities.
Key Features:
- Single DIN DVD Player with 32GB SD/USB Playback.
- Playback from DVDR/RW & CDR/RW of MP3, MP4, & DivX.
- Playback from 32GB SD Card or USB of MP3, MP4, & DivX.
- AUX A/V Input for game console or personal media devices.
- In-Dash, Floor, & Vertical Mounting Brackets Included.
- DIN Size Trim Ring For In-Dash Mounting Included.
- Flash Memory for Last Position Recall.
- OSD On Screen Display.
- Digital Anti-shock.
- A/V Pre-amp Outputs, 2V.
Custom Install Monitors
Soundstream's Custom Install Monitors are designed for seamless integration into vehicle interiors, offering high-resolution LCD screens with various sizes and aspect ratios for a customized viewing experience.
Key Features:
- 10.4", 11.2", and 15.1" TFT-LCD Monitors.
- On-screen Display with Remote Control.
- 2 Video Inputs.
- NTSC/PAL Auto select.
- Various Aspect Ratios (4:3, 16:9).
- High Resolution Displays (640x480 to 800x600).
- High Brightness and Contrast Ratios.
Overhead Solutions
Soundstream's Overhead Solutions include ceiling mount DVD entertainment systems and LCD monitors, offering features like motorized screens, multiple media playback options, and integrated dome lights for enhanced rear-seat entertainment.
Key Features:
- Ceiling Mount DVD Entertainment Systems with motorized LCD screens (15.6", 11.2", 10.3").
- Playback from DVD-R/RW, SD Card, and USB.
- HDMI Input for auxiliary HD devices.
- Wireless IR Transmitter and FM Stereo Transmitter.
- A/V Inputs and Outputs for auxiliary sources and multiple component integration.
- Interchangeable Color Skins (beige, black, grey).
- High Resolution LCD Screens (1024x600 to 1366x768).
Headrest Monitors
Soundstream's Headrest Monitors provide a personalized viewing experience for passengers, featuring touch screen control, multiple video inputs, and selectable aspect modes for optimal display.
Key Features:
- 6.5" and 7" LCD Touch Screen Headrest Monitors.
- Touch Screen Control of compatible DVD players.
- 2 RCA Video Input.
- NTSC/PAL Selection.
- Sculptured Trim Ring Included.
- 400 x 240 16:9 Widescreen Aspect Ratio.
- 550 NIT Panel Brightness.
Headphones
Soundstream offers a range of wireless IR and RF headphones designed for comfortable and immersive audio listening, featuring foldable ear pads, auto power off functions, and variable volume controls.
Key Features:
- Single and dual channel IR and RF wireless headphones.
- Foldable ear pads for compact storage.
- Auto power off and auto mute functions.
- Variable volume control and ALC Auto Level Control.
- MP-3 Player Input via 3.5mm Jack.
- EVA hard carrying cases included.
Window Film Tint
Soundstream's Window Film Tint provides automotive and commercial applications with superior protection against heat, glare, and UV rays. The color-stable film is made with American-made adhesives for a seamless attachment and undistorted views.
Key Features:
- Color-stable film that never bubbles, peels, or turns purple.
- Malleable for seamless attachment to curved surfaces.
- American-made adhesives for impervious seal and undistorted views.
- Reduces heat, glare, and energy costs.
- Eliminates harmful UV by 99%.
- Lifetime Warranty with Everlast Series.
- 4-Year Prorated Warranty with Elite Series.
Rear View Cameras
Soundstream's Rear View Cameras offer enhanced safety and convenience with features like night vision, backup sensors, on-screen distance gauges, and proximity alerts. They are designed for easy installation and reliable performance.
Key Features:
- License Plate Frames with integrated cameras, backup sensors, and distance gauges.
- 1/4" CCD Color Cameras with low light sensitivity.
- Waterproof camera housings and external wire connections.
- 8 IR LEDs for night viewing.
- 130° Capture Angle for wide field of view.
- Reversed Image output for accurate parking.
- 640 x 480 Resolution.
- Surface mount and flush mount options available.
Accessories
Soundstream offers a range of accessories to complement your audio system, including universal DTV tuners, video signal boosters, FM transmitters, and PLL FM modulators for enhanced functionality and integration.
Available Accessories:
- Universal DTV-MH TV Tuner.
- Universal ATSC Digital TV Tuner.
- Video Signal Booster.
- Wireless 3 CH FM Transmitter.
- PLL FM Modulator.
Related Documents
 |
Soundstream Car Audio & Electronics Catalog 2017 Explore the 2017 Soundstream Car Audio & Electronics Catalog featuring a wide range of products including source units, amplifiers, speakers, subwoofers, and accessories. Discover innovative features like Dual Display Source Units, AptiX Source Units, Tarantula Amplifiers, Reference Subwoofers, Wake Tower Speakers, and more. |
 |
Soundstream VR-651/VR-651B Owner's Manual: Installation and Operation Guide Comprehensive owner's manual for the Soundstream VR-651/VR-651B 2 DIN 6.5" Touch Screen Car Multimedia Receiver. Covers installation, operation, features, troubleshooting, and technical specifications. |
 |
Soundstream 2020 Car and Marine Audio Product Catalog Explore the comprehensive 2020 Soundstream catalog featuring a wide range of car and marine audio products, including GPS navigation source units, multimedia receivers, amplifiers, subwoofers, speakers, and accessories. Discover advanced features like Bluetooth connectivity, Android PhoneLink, and SiriusXM compatibility. |
 |
Soundstream 2016 MVP MAP Price Sheet Official price sheet for Soundstream's 2016 MVP products, featuring Rubicon Amps, Stealth Amps, Marine Audio speakers, and Aptix Source Units with MAP and MSRP pricing. |
 |
Soundstream 2024 Car Audio Catalog: Source Units, Amplifiers, Speakers, and More Explore the comprehensive 2024 Soundstream catalog featuring a wide range of car audio products including head units, amplifiers, speakers, subwoofers, GPS navigation systems, and rear-seat entertainment solutions. |
 |
Soundstream VR-722HB Single Din Touch Screen TFT Monitor DVD Player Manual This manual provides detailed installation, operation, and specification information for the Soundstream VR-722HB Single Din Touch Screen TFT Monitor DVD Player. Learn about its features, remote control, and troubleshooting. |
 |
Soundstream VR-345B Flip-down Monitor DVD/CD/MP3/MP4 Player with Bluetooth - Owner's Manual Comprehensive owner's manual for the Soundstream VR-345B, a flip-down/detachable 3.4" monitor DVD/CD/MP3/MP4 player with AM/FM radio and built-in Bluetooth. Includes installation, operation, troubleshooting, and specifications. |
 |
Soundstream VR-75XB Owner's Manual: Installation, Operation, and Features Comprehensive owner's manual for the Soundstream VR-75XB car multimedia player, covering installation, operation, Bluetooth, SiriusXM, troubleshooting, and technical specifications. |