ECOVACS DEEBOT N10 PLUS Robot Vacuum & Mop
User Manual
Introduction
Welcome to your ECOVACS DEEBOT N10 PLUS. This comprehensive user manual provides detailed instructions for setting up, operating, and maintaining your robot vacuum and mop for optimal performance and longevity.
Safety Precautions
Please read and follow all safety instructions before operating the DEEBOT N10 PLUS to ensure safe and efficient use:
- Read all instructions before use.
- Keep the appliance and its accessories away from water and moisture.
- Do not operate in areas with flammable liquids or gases.
- Ensure adequate ventilation around the charging station and robot.
- Use only the original rechargeable battery and Auto-Empty Station provided by ECOVACS.
- Keep children and pets away from the operating robot and its charging station.
- Do not use the robot on wet surfaces or for wet mopping without the correct mopping attachment and water tank filled appropriately.
- ⚠️ Do not attempt to disassemble or repair the unit yourself. Contact authorized service personnel for assistance.
- Ensure the power cord is not damaged and is plugged into a properly grounded outlet.
What's in the Box
Before you begin, verify that all the following components are included in your package:
- DEEBOT N10 PLUS Robot
- Auto-Empty Station
- Power Adapter
- Side Brushes (2 pairs)
- Dustbin Filter (pre-installed or separate)
- Cleaning Cloth
- Cleaning Cloth Holder
- User Manual (this document)
Getting Started: Setup
1. Setting Up the Auto-Empty Station
Position the Auto-Empty Station on a hard, level surface against a wall. Ensure sufficient clearance around the station for the robot to dock and for proper airflow:
- Clearance in front: 1 meter (3.3 ft)
- Clearance on both sides: 0.5 meters (1.6 ft)
- Clearance above: 1.5 meters (5 ft)
Connect the provided power adapter to the Auto-Empty Station and plug it into a suitable wall outlet.
2. Installing Side Brushes
Attach the two side brushes to the designated posts on the underside of the DEEBOT robot. Press down firmly until they click into place. Ensure the brushes are correctly oriented.
3. Charging the Robot
Carefully place the DEEBOT N10 PLUS onto the Auto-Empty Station, ensuring the charging contacts on the robot align with those on the station. The robot will automatically begin charging. It is recommended to fully charge the robot before its first cleaning session (typically 4-5 hours).
4. Downloading the ECOVACS HOME App
To unlock advanced features and control your DEEBOT remotely, download the ECOVACS HOME app from the Apple App Store or Google Play Store on your smartphone. Follow the in-app instructions to create an account, connect your DEEBOT to your home Wi-Fi network (2.4 GHz band), and complete the setup.
Operation
Starting a Cleaning Session
You can initiate, pause, or stop a cleaning cycle using several methods:
- Robot Buttons: Press the ⏻ (Power/Start/Pause) button on the robot to begin or pause cleaning. Press the ? (Home) button to send the robot back to its charging station.
- ECOVACS HOME App: Use the app interface for full control, including scheduling, mode selection, and real-time status updates.
Cleaning Modes
The DEEBOT N10 PLUS offers various cleaning modes to suit different needs, selectable via the ECOVACS HOME app:
- Auto Mode: The robot systematically cleans the entire accessible floor area.
- Edge Mode: Designed to clean along walls and around furniture legs for thorough edge cleaning.
- Spot Mode: For concentrated cleaning of a specific, heavily soiled area.
Mopping Function
To activate the mopping function, attach the cleaning cloth holder and a damp cleaning cloth to the underside of the robot. Ensure the water tank is filled with clean water only (do not use harsh chemicals or cleaning solutions unless explicitly approved by ECOVACS). Select the appropriate mopping mode in the app.
Auto-Empty Function
Upon completion of a cleaning cycle or when the robot's dustbin is full, the DEEBOT N10 PLUS will automatically return to the Auto-Empty Station. The station will then efficiently empty the robot's dustbin into its larger capacity bag, and the robot will resume cleaning if necessary or recharge.
Maintenance
Regular maintenance is crucial for keeping your DEEBOT N10 PLUS performing at its best. Follow these guidelines:
1. Cleaning the Dustbin and Filter
Empty the robot's internal dustbin after each cleaning session. Clean the filter (e.g., rinse with water and allow to air dry completely) weekly and replace it approximately every 1-2 months, depending on usage.
2. Cleaning the Main Brush and Side Brushes
Periodically remove the main brush and side brushes. Use the provided cleaning tool to remove tangled hair, threads, and debris. Ensure brushes are free from obstructions before reinstallation.
3. Cleaning the Sensors and Charging Contacts
Gently wipe the robot's various sensors (e.g., cliff sensors, obstacle sensors, wall sensors) and the charging contacts on both the robot and the station with a clean, dry, soft cloth. This ensures accurate navigation and reliable charging.
4. Cleaning the Cleaning Cloth and Holder
Wash the cleaning cloth after each mopping task. The cleaning cloth holder should also be wiped clean to prevent residue buildup.
5. Cleaning the Auto-Empty Station
Check the dustbin bag within the Auto-Empty Station regularly. Replace the bag when it is full. Wipe down the interior and exterior of the station as needed.
Troubleshooting
Refer to the table below for solutions to common issues you might encounter:
| Issue | Possible Cause | Solution |
|---|---|---|
| Robot not charging | Charging contacts are dirty or misaligned. Station is not powered. | Clean the charging contacts on the robot and station. Ensure the station is plugged in and powered on. Verify the robot is correctly seated on the station. |
| Robot does not start | Battery is depleted. Robot is not powered on. | Ensure the robot is adequately charged. Press and hold the power button to turn it on. |
| Poor cleaning performance | Main brush, side brushes, or dustbin is full or clogged. | Clean the main brush, side brushes, and empty the dustbin. Check for any blockages in the suction inlet. |
| Robot gets stuck frequently | Obstacles in the cleaning path, complex terrain, or low-lying furniture. | Clear the cleaning area of loose cables, rugs, and small objects. Ensure the robot's sensors are clean. Adjust furniture if necessary. |
| Auto-Empty Station not functioning | Station's dustbin bag is full. Blockage in the station's suction port. Station is not powered. | Replace the dustbin bag in the station. Check for and clear any blockages in the station's port. Ensure the station is connected to power. |
Specifications
Key technical specifications for the ECOVACS DEEBOT N10 PLUS:
- Model Name: DEEBOT N10 PLUS
- Suction Power: Up to 3800 Pa
- Battery Type: Rechargeable Lithium-ion
- Robot Dustbin Capacity: 0.4 Liters
- Auto-Empty Station Dustbin Capacity: 2.5 Liters
- Wi-Fi Connectivity: Supports 2.4 GHz Wi-Fi networks
- Dimensions (Robot): Approximately 350 x 350 x 93 mm (13.8 x 13.8 x 3.7 inches)
- Weight (Robot): Approximately 3.5 kg (7.7 lbs)
Contact and Support
For additional support, warranty information, or to purchase accessories, please visit the official ECOVACS website or contact their customer service department.
Official Website: https://www.ecovacs.com
