OXVA NeXLIM GO - User Manual

Product Overview

The OXVA NeXLIM GO is a powerful and versatile pod vape designed for an exceptional vaping experience. It features a 40W maximum output, a robust 1800mAh battery, and a 4ml e-liquid capacity cartridge. The device utilizes dual mesh coil technology for enhanced flavor and vapor production.

Package Contents

The package typically includes:

• 1 x OXVA NeXLIM GO Device
• 1 x OXVA NeXLIM GO Cartridge (4ml)
• 1 x OXVA UNI Coil (e.g., 0.6Ω A1 Mesh)
• 1 x OXVA UNI Coil (e.g., 0.4Ω KA1 Mesh)
• 1 x USB Type-C Cable
• 1 x User Manual
• 1 x Warranty Card

Device Diagram and Components

The OXVA NeXLIM GO features a sleek and ergonomic design. Key components include:

• Power Button: Used to turn the device on/off and fire the atomizer.
• Adjustable Airflow Control: Allows users to customize their draw resistance.
• Pod Cartridge: Holds the e-liquid and the replaceable coil. It magnetically attaches to the device.
• USB Type-C Port: For charging the device's internal battery.
• LED Indicator: Displays battery status and charging information.

[Diagram showing the device with labels pointing to the power button, airflow control, cartridge, and USB port.]

Getting Started

1. Install the Coil: Remove the cartridge from the device. Unscrew the base of the cartridge to access the coil housing. Insert a new OXVA UNI coil, ensuring it is properly seated. Screw the base back onto the cartridge.
2. Fill the Cartridge: Remove the silicone stopper from the side of the cartridge. Fill the 4ml capacity with your preferred e-liquid. Ensure not to overfill. Replace the stopper securely.
3. Prime the Coil: After filling, it is recommended to let the cartridge sit for 5-10 minutes to allow the e-liquid to saturate the coil wick. This prevents dry hits.
4. Attach the Cartridge: Insert the filled cartridge into the device. It should click into place magnetically.
5. Power On/Off: Press the power button five times rapidly to turn the device on or off.
6. Vaping: Press and hold the power button while inhaling. Release the button to stop.

Adjusting Airflow

Rotate the airflow control ring located at the base of the cartridge to adjust the airflow from a restricted mouth-to-lung (MTL) draw to a looser direct-lung (DL) draw.

Charging the Battery

Connect the provided USB Type-C cable to the USB port on the device and to a compatible power source. The LED indicator will show the charging status. A full charge typically takes approximately 1-2 hours.

Coil Replacement

When the flavor diminishes or you experience a burnt taste, it is time to replace the coil. Follow the steps in the 'Install the Coil' section.

Maintenance and Care

• Keep the device clean and dry. Wipe with a soft, dry cloth.
• Avoid exposing the device to extreme temperatures or moisture.
• Do not attempt to disassemble the device or battery.
• Use only the provided charging cable.

Safety Precautions

• This product is intended for use by adults of legal smoking age.
• Keep out of reach of children and pets.
• Do not use if you are pregnant or breastfeeding.
• Consult a physician before use if you have any pre-existing medical conditions.
• Do not use if the device or any components appear damaged.
• This device contains a lithium-ion battery. Dispose of batteries responsibly according to local regulations.

Troubleshooting

No Vapor: Ensure the battery is charged and the device is powered on. Check coil installation and e-liquid level.

Leaking: Ensure the cartridge is properly assembled and the coil is correctly installed. Check the silicone stopper.

Weak Vapor: Check battery level and coil condition. Adjust airflow if necessary.

Specifications

• Brand: OXVA
• Model: NeXLIM GO
• Output Wattage: 40W Max
• Battery Capacity: 1800mAh
• Cartridge Capacity: 4ml
• Charging: USB Type-C
• Coil Compatibility: OXVA UNI Coils

Compliance Information

This device complies with relevant electronic cigarette regulations. CE, FCC, and RoHS certifications are indicated on the device packaging.

[CE logo] [FCC logo] [RoHS logo]