OXVA Xlim User Manual

Product Structure

The OXVA Xlim consists of the following components:

• Cartridge (Pod)
• Airflow adjust valve
• LED screen
• Fire button
• Device
• Type-C interface

Specifications

Operation Guide

1. Filling Juice

   Fill the e-juice into the cartridge. After filling, wait 5-8 minutes before vaping to prevent dry burning. Close the silicone plug promptly to avoid leaks.

2. Power On/Off

   Press the fire button 5 times consecutively to turn the device on or off.

3. Vaping

   After filling the e-juice and waiting, you can vape by drawing directly or pressing the fire button.

4. Adjust Airflow

   Slide the airflow adjusting valve to adjust the airflow to your preference.

5. Adjust Wattage

   Press the fire button 3 times. When the power on the screen flashes, press the fire button to adjust the power in 0.5W increments. Long press for rapid adjustment. The Photon chip will automatically set the power range based on the coil resistance to protect it from burning (0.6Ω pod: 5-25W, 0.8Ω pod: 5-18W).

6. Charging

   Connect the charging cable to the Type-C interface to charge with a 1A current. Disconnect power once fully charged.

7. Puff Clear

   Press the fire button 7 times to clear the puff data.

8. Lock/Unlock Fire Button

   Press the fire button 4 times to lock or unlock the fire button. You can still auto-draw vape or adjust wattage by pressing the fire button 3 times.

Screen Prompts

• BATTERY LOW: The battery is low.
• NO ATOMIZER: The cartridge is not detected.
• POWER OFF: The device is powering off.
• SHORT: Short-circuit detected.
• TIMEOUT: Vaping time exceeded 8 seconds.
• TEMP HIGH: PCBA temperature is too high.

Recommended E-Juice

• Freebase Nic: 18mg/24mg
• Salt Nic: 20-50mg

Statement

• Keep away from flammable and explosive materials to avoid injury.
• Do not leave the device unattended while charging.

Warranty Policy

OXVA provides a 90-day warranty from the date of purchase for defects in materials or workmanship under normal use. This warranty covers repair or replacement of defective parts. It may be disqualified due to improper use, unauthorized adjustments, excessive force, exposure to liquids, or use with non-OXVA components. Consumable parts like coil heads, USB cables, and mouthpieces are not covered. For more information, visit www.oxva.com or contact support@oxva.com.

Purchase Information

Please fill out the Product Model, Date of Purchase, Store Information, and Customer Information for warranty claims.