OXVA XLIM SQ PRO
Package Contents
- 1x OXVA Xlim SQ Pro battery
- 1x OXVA Xlim V3 cartridge Top Fill (2ml, 0.8 ohm)
- 1x OXVA Xlim V3 cartridge Top Fill (2ml, 0.6 ohm)
- 1x USB-C cable
- 1x Lanyard
Operation
Turning On/Off
Press the FIRE button 5 times rapidly within 2 seconds.
Vaping
The device features the following components:
- 1. FIRE button
- 2. USB-C port
- 3. Battery
- 4. Cartridge
- 5. Airflow control
- 6. Display
Parameters
Dimensions: 54.4 x 20.4 x 77mm
Output Power: 5W - 30W
Battery Capacity: 1200 mAh
Cartridge Volume: 2ml
Material: Aluminum Alloy + PCTG
Charging: USB-C port (5V/1A)
How to Vape
Vape by drawing from the mouthpiece or by pressing the button. The device will stop heating if the button is pressed for more than 8 seconds.
Airflow Control
Adjust the amount of airflow using the slider to control the airflow.
E-liquid Filling
1. Open the silicone plug.
2. Fill the cartridge with e-liquid through the side port (NOT the central hole).
3. Close the plug.
After filling a new POD, let it sit for 5-8 minutes to allow the cotton to soak up the e-liquid. This prevents dry hits and coil burning.
Settings Menu
Press the button 2 times rapidly to enter the menu. Use short presses to select and a long press to confirm.
Power Adjustment
Press the FIRE button 3 times rapidly, then use short presses to select the desired wattage.
Locking/Unlocking
Press the FIRE button 4 times rapidly to lock or unlock the device.
Display Messages
| Message | Description |
|---|---|
| LOCKED | FIRE button is locked. Press 4 times to unlock. |
| TIME OUT | Vaping for longer than 8 seconds. |
| HIGH TEMP | High temperature detected. |
| Low Battery | Voltage below 3.2V. |
| Short Circuit | Short circuit detected. |
| NO POD | Check the connectors between the POD and the battery. |
Diagram Descriptions
Device Components Diagram: The device features a prominent FIRE button (1), a USB-C port (2) for charging, the main battery body (3), a removable cartridge (4), an adjustable airflow control slider (5), and a digital display screen (6).
E-liquid Filling Diagram: Illustrates the e-liquid filling process, showing how to open the silicone plug on the cartridge and insert e-liquid into the side port, avoiding the central airflow channel.
Mode Selection Interface: Depicts the user interface for adjusting settings, showing options like 'POWER', 'SMART', 'THEME', 'FLUFF', and 'EXIT', with indicators for current settings and battery level.
Warnings and Precautions
- Read the manual carefully before use.
- Do not drop or throw the device, as it may be damaged.
- Do not leave e-liquid in the atomizer if you will not be using it for an extended period.
- Refill the tank with e-liquid when it is almost empty to prevent dry burning.
- Do not expose the device to humid environments or high temperatures.
- Do not use the device in windy or dusty conditions. Unplug the cable after full charging. Ensure the USB cable is connected correctly. Do not place the device in pockets or bags with other items (coins, jewelry, or other hard objects). The charger and battery may heat up during charging; keep them away from flammable materials and mixtures.
- Keep out of reach of persons under 18 years of age. This product is not intended for use by persons under 18, pregnant or nursing women, diabetics, individuals with high blood pressure, or those with heart or vascular problems, or allergies to any of the components. The product is not recommended for use by young people or non-smokers.
Side Effects
Possible side effects include headache, dizziness, and dryness in the mouth, nose, or throat.
The device itself is neither addictive nor toxic. Information regarding addiction and toxicity can be found on the packaging and in the leaflet for the e-liquid used.
Manufacturer and Importer Information
Manufacturer: Shenzhen Future Tech Co., Ltd. (China)
Importer: 2Hservice s.r.o.
Address: Křivenická 444/33, Praha, Czech Republic
Website: www.mastervaper.cz
Phone: +420734 645 645
