PYLE
Chopper Series
Model: PLATVB84A
800 Watts Motorcycle/ATV/Snowmobile Mount with Dual Handle-bar Mount Chromed Plastic Weatherproof 3-Inch Speakers W/Amplifier Built-In W/Bluetooth
OWNER'S MANUAL
Introduction
Congratulations on your purchase of this Pyle Chopper Series premier amplified speaker system. Like all Pyle products, this motorcycle system has been thoroughly tested to ensure consistent, reliable performance under rigorous conditions. Our systems are designed to withstand water, moisture, heat, and direct sun exposure. We pride ourselves in customer satisfaction. If you have any questions regarding the installation and/or operation of your Pyle Chopper Series motorcycle speaker system, which is not covered in this manual, please contact your Pyle Dealer or Pyle Technical Support.
Product Features
PLATVB84A
800 Watts Motorcycle/ATV/Snowmobile Mount with Dual Handle-bar Mount Chromed Plastic Weatherproof 3-Inch Speakers W/Amplifier Built-In W/Bluetooth In-Line Control For iPhone, iPad, iPad Mini, Cell Phone Etc.
- 400 Watts X 2 channel micro amplifier built in the speaker enclosure with wire harness.
- Pair of handlebar mounting clamps.
- Chrome stainless universal handlebar audio mount.
- Easy Chrome Stainless Mounting Brackets and Accessories included.
- Environment resistance and water-proof Bluetooth and in-line volume control console with 3.5mm Stereo Input Jack, providing easy connection to the output of other audio devices.
- Works with iPhone/Smartphones, iPod/MP3 Players, Cell Phones, etc.
- 3" Chromed Plastic Bullet Speaker with Supreme High Temperature Voice Coil.
- Strontium Magnet Structure.
- Bluetooth 3.0 technology.
- Bluetooth auto-connects when power is on.
- Bluetooth auto-disconnects when Aux-in (3.5mm connector) is used.
- Easy and quick installed handle-bar mount bracket is included.
- Speaker Dimension: 4.21"(W) x 4.21"(H) x 4.61"(L).
- Bluetooth console Dimension: 2.09"(W) x 0.83"(H) x 3.15"(L).
What is included?
Upon un-packing your new Pyle Chopper Series audio system, please check to ensure you have all the included parts.
| Part# | Description |
|---|---|
| #1 | 400 Watts X 2 channel micro amplifier built in the speaker enclosure with Wire harness |
| #2 | (1) "P" shape clamp Handlebar for Bluetooth Control Box |
| #3 | (1) "Z" shape bracket Handle bar for Bluetooth Control Box |
| #4 | (1) Universal 12 Volt Wire Harness Connection |
| #5 | (1) 12 Volt Direct Plug, for Compatible Motorcycles |
| #6 | (1) Bluetooth Controller |
| #7 | (1) EVA PAD, (1) RUBBER PAD |
| #8 | (6) Black Wire Tie Lockable Straps |
| #9 | (2) Screw, Washer for Speaker Bracket |
| #10 | (1) Screw, Washer and Nut for Bluetooth Control Box |
| #11 | (2) Chrome stainless handle bar mounting clamps for speakers |
Connections
Diagram showing the connection of the Left and Right speakers to the Bluetooth control box. The speakers have positive (+) and negative (-) wires. The control box connects to a power source via an Aux IN Power Cable Adaptor.
Left Speaker
Right Speaker
Wiring: Black/white [plus] (+), Black [minus] (-)
Aux IN Power Cable Adaptor connects to Battery [+].
Loudspeaker Mounting Diagram
Diagram illustrating the mounting of the speaker with brackets attached to its base.
Installation
- Screw the brackets to the bottom of the speakers.
- Find a safe, ideal mounting location and fit the brackets over the chosen mounting bars.
- Fasten the mounting screws after reviewing the safety of the mounting location.
Wiring
- Be sure to run the wiring securely and far away from any moving components.
- Connecting the power cable to the power source: connect the 12V red wire to a (fused 5A) switched power source.
- Use the 3.5mm stereo jack to connect to your entertainment source (MP3 player, etc.).
- Use your player device and the wired remote Bluetooth control box to control your level of loudness.
Bluetooth Pairing and Connection
Diagram of the Bluetooth controller showing buttons for Previous Song/Volume Down, Play/Pause (also On/Off), and Next Song/Volume Up. Indicators for Bluetooth and Power are also shown.
- Connect the Bluetooth controller box to your device.
- Press and Hold the Play/Pause button [▶️||] for three seconds until the power indicator lights red.
- The system will automatically go into pairing mode. The power indicator will turn red for about 7 seconds and then alternate red and blue. Please be sure that Bluetooth is turned on your device. Select "Pyle Audio" on your device to connect the Bluetooth controller. The light will turn solid blue when connected and not flash.
- When the device is out of Bluetooth range, Bluetooth will be disconnected automatically and will reconnect when detected in range again. (If not, please repeat steps 1 and 2).
- When Bluetooth is disconnected or the 3.5mm AUX Input is plugged in, the power indicator will glow red.
Playing Music
- Press [▶️||] to start or pause the music.
- Press [>>+] shortly for the next track; press and hold for Volume Up.
- Press [-<<] shortly for the previous track; press and hold for Volume Down.
Bluetooth Installation
Step 1
Install "P" shaped clamp (item#2) or “Z” shaped bracket (item#3) threaded onto the Bluetooth controller hook (packed with Bluetooth controller). Use the provided bolt (item#10) to fix on the handlebar. It can be adjusted for tightness by the provided EVA & rubber pad (item#7).
Step 2
Slide the Bluetooth controller into the hook.
Step 3
Press down the Bluetooth controller hook and then slide out the Bluetooth controller box at the same time to remove the Bluetooth controller.
