280ml Aroma Diffuser
User Manual
Product Image and Overview
Diagram illustrating the 280ml Aroma Diffuser and its components:
- Nozzle: The mist outlet at the top.
- Lid (cover): The removable top part.
- Air outlet: Vents for mist dispersion.
- Body: The main housing of the diffuser.
- Base: The bottom part containing the water tank and electronics.
- Mist indicator: Shows mist status.
- Light indicator: Shows light status.
- DC jack: Port for power adapter connection.
- Adapter: External power supply unit.
Specifications
| Model | QMJS30 | Run time | up to 7 hours |
|---|---|---|---|
| Capacity | 280ml | Coverage | up to 250 square feet |
| Adaptor Power | 100-240V, 24V 0.5A | ||
Package Included
- 1 X Aroma Diffuser
- 1 X Adaptor
- 1 X Manual
How to Use
Follow these steps to set up and operate your diffuser:
- Lift the 3D glass globe and the cap.
- Connect the power cord to the base.
- Add water and several drops of essential oils.
CAUTION: 1. Do not exceed the "MAX" line when adding water. 2. It is better to use a container to add water to prevent water splashing into the motor.
- Replace the cap and the glass globe, then plug in the power adapter.
How to Clean
- Rinse the water tank with clean water and wipe dry with a clean cloth. Please ensure there is no water splashing into the air outlet.
- Clean the sensor/disc with a cotton swab.
CAUTION: Do not splash water into the air outlet.
Model Setting
Light Mode:
- Press the button ? for the 1st time to turn on the LED light; the color will change automatically.
- Press the button ? for the 2nd time to fix the color.
- Press the button ? for the 3rd to 9th time to change the color; the essential oil diffuser has 7 changing colors.
- Press the button ? for the 10th time or long press for 3 seconds to turn off the light.
Mist and Time Mode:
- Press the button ? for the 1st time to turn on the spray. The initial configuration is AUTO.
- Press the button ? for the 2nd to 4th time to change the timer to 1H/3H/5H.
- Press the button ? for the 5th time to turn off the spray.
Troubleshooting
| Symptom | Cause | Solution |
|---|---|---|
| No mist or little mist | Using distilled or purified water. | Use tap water (without filter). |
| Water is exceeding the max fill line. | Clean the unit and add water 1/2 way to fill line and additional water after getting mist. | |
| Sensor/disc (inside the bottom of water tank) needs to be cleaned. | Clean as advised with clean water. Dry with cloth or brush or swab. | |
| Tap water is too cold. | Empty tank and refill with lukewarm tap water. | |
| Leaking | Overfilled with water. | Clean the unit and add water 1/2 way to fill line and additional water after getting mist. |
| The lid (cover) is not fully covered on the water tank. | Make sure the lid (cover) is properly in place. | |
| Blinking lights | Water level indicator is dirty. | Carefully clean the sensor/disc inside the bottom of unit. |
| None of the examples | Get in touch with us and we will happy to help. |
Product Maintenance
- Do not use with a wet hand.
- Do not use detergents, solvents, or abrasive agents to clean the diffuser unit.
- Do not block the mist output, or it will damage the product.
- Do not remove the cover or add water/oils when in use.
- Please use on a flat surface.
- Please clean the diffuser regularly; recommend once a week.
- Please follow the advised cleaning instructions.
- Please keep away from children and pets.
- Please contact us if you found any problems; we will be happy to help.
Important Information
CAUTION: FOR INDOOR USE ONLY
Our Porseme diffuser comes with a 12-month manufacturer warranty. Please kindly contact us before you return it to the retailer.
Please contact customer service: porseme-service@hotmail.com
Our Facebook is PORSEME US. Visit us at: facebook.com/PorsemeUS
For purchases and more information, visit: www.amazon.com/porseme and www.porseme.store.
