Wi-Tek WI-FW5600 6GHz AX4800 Fixed Access Point

Quick Installation Guide

1. Packing Content

The package includes the following items:

Radio x 1
Quick Installation Guide x 1
Metal Strap x 2
48V 2.5GE PoE Adapter x 1
Power Cord x 1

Product Model: WI-FW5600

Website: www.wireless-tek.com

2. Appearance Overview

For WI-FW5600

Front Panel: Features LED indicators.

Side Panel: Includes Reset Button, DC IN 12V-48V port, 1Gbps RJ45 Ethernet Port (ETH1), and 2.5Gbps RJ45 Ethernet Port with 802.3af/at PoE Input (ETH2).

LED Indicator Status:

Item	Status	Description
PWR	On / Off	The device is powered on / The device is powered off
SYS	On / Off	The system is working normally / The system is not working
Wi-Fi	On / Off	The Wireless function is enabled / The Wireless function is disabled
ETH1	On / Blinking	The port is connected / Data being transferred
ETH2	On / Blinking	The port is connected / Data being transferred

3. Device Installation

Mount the radio to a pole using the provided metal strap.
Connect the device to the antenna using four RF cables.
Press the buckle and move it in the direction indicated by the arrow [arrow].
Using a cable connecting to the ETH port, slide the cover back to the radio, with the cable passing through the hole.

Application Type: PTMP (Point-to-Multipoint)

4. Application

This device can be used as an Access Point (e.g., WI-FW5600) or as a Client device (e.g., WI-FW5625, WI-FW5620-H, WI-FW5619).

5. Web Management

A) Boot Up Device

Power on the device.
Connect the PC to the PoE adapter using an Ethernet cable.
Open a web browser (e.g., Chrome, Firefox) and navigate to the default IP address 192.168.1.2. Enter the password 'admin' to access the Management UI.

B) Configure the Access Point

Complete the LAN Settings and click 'Next'. Default settings: IP 192.168.1.2, Netmask 255.255.255.0, Gateway 192.168.1.1, DNS 8.8.8.8.
Configure Wireless Settings: Choose 'Access Point' Mode, create a new SSID (Network name), select an Encryption Mode, and create a PSK Key for security.
Verify your settings and click 'Finish' to complete the configuration.

C) Configure the Client

Ensure client devices are powered on and repeat the boot-up steps (A-2 and A-3).
Complete the LAN Settings, ensuring the subnet is the same as the Access Point, and click 'Next'.
Configure Wireless Settings: Choose 'Client' Mode and enter the same SSID, PSK Key, and select the same Encryption Mode as the Access Point.
Verify your settings and click 'Finish' to complete the configuration.

Warranty Card

If the product defects within the warranty period, professional maintenance service will be provided. Proof of purchase and a complete product serial number are required for warranty services. Defects not caused by workmanship or product quality, such as natural disasters, water damage, extreme thermal or environmental conditions, sticker damage, or loss of the warranty card, will disqualify the product from the limited warranty.

Technical Support

Company: Wireless-Tek Technology Limited

Address: Building 3, Units 1801-1807, 1812, Huaqiang Era Plaza, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen City, Guangdong Province, China.

Website: www.wireless-tek.com

Tel: 86-0755-32811290

Email: sales@wireless-tek.com

Technical Support Email: tech@wireless-tek.com

Certifications: CE, FC, ROHS

	WI-Tek WI-AP217/WI-AP217-Lite Quick Installation Guide This guide provides step-by-step instructions for installing and configuring the WI-Tek WI-AP217 and WI-AP217-Lite Cloud-Managed Wireless Ceiling Access Points. It covers unpacking, hardware overview, typical network connections, physical installation, power options, initial configuration via web interface, and cloud management setup. Includes troubleshooting FAQs and warranty information.
	Wi-Tek PoE Extender Quick Installation Guide This guide provides essential information for installing and operating Wi-Tek PoE Extenders, including models WI-PE31E, WI-PE31G, WI-PE51G, WI-PE21E, and WI-PE21G. Learn about product features, installation methods, and network applications.
	Wi-Tek PoE Extender Quick Installation Guide A comprehensive quick installation guide for Wi-Tek PoE Extenders, detailing packing contents, appearance, specifications, DIP switch functions, LED indicators, installation procedures, network application examples, warranty, and technical support for models WI-PE31E, WI-PE51E, WI-PE31G, WI-PE51G, WI-PE21E, and WI-PE21G.
	Wi-Tek PoE Switch Quick Installation Guide This guide provides essential information for the quick installation of Wi-Tek PoE switches, including models WI-PS205, WI-PS210, WI-PS210G, WI-PS518G, and WI-PS526G. It covers package contents, appearance overview, installation steps, DIP switch functions, LED indicators, and technical support details.
	Wi-Tek PoE Splitter Quick Installation Guide Quick installation guide for Wi-Tek PoE Splitters, including models WI-POE11S-48V, WI-POE56S-BT-I-O, WI-POE55S-BT-I-DC, and WI-POE31S. Covers package contents, appearance, LED indicators, installation, and warranty information.
	Wi-Tek Smart IoT Box Installation Guide for WI-IOTBOX01 and WI-IOTBOX02 Comprehensive installation guide for the Wi-Tek Smart IoT Box models WI-IOTBOX01 and WI-IOTBOX02, covering package contents, hardware introduction, installation procedures, application scenarios, and warranty information.
	Wi-Tek WI-R3 1200Mbps Dual-Band Wireless Mesh Router Quick Install Guide Quick start guide for the Wi-Tek WI-R3, a 1200Mbps Dual-Band Wireless Mesh Router with PoE Passthrough. Learn about package contents, interface, LED indicators, network applications, login methods, configuration steps, and cloud management.
	Wi-Tek WI-PMS552F L2+ Managed PoE Switch: Quick Installation Guide Comprehensive quick installation guide for the Wi-Tek WI-PMS552F L2+ Managed PoE Switch. Covers package contents, hardware overview, installation steps (desktop and rack-mount), and WEB UI login procedures.