ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Dual Switch with LEDs Wiring Diagram - Romain Pickups

Dual Switch with LEDs

Hammond 1590A Enclosure

This project features a dual switch pedal built within a Hammond 1590A enclosure. The build includes the following key components:

Two 3PDT Latching Footswitches
Two LEDs
Two 3.3k Resistors
One Stereo Output Jack

Diagrams

Top View

The top view of the enclosure shows the placement of two blue LEDs and two grey footswitches. The enclosure itself is marked with the label "DUAL SWITCH". The diagram indicates drill holes are present on the top surface for these components.

Bottom View

The bottom view provides a detailed look at the internal wiring. A stereo output jack is mounted, with its terminals clearly labeled as TIP, SLEEVE, and RING. Red and black wires are used to connect these jack terminals to the various lugs of the two 3PDT footswitches. Each footswitch is depicted with multiple connection points (lugs) where the wiring is attached.

Models: Dual Switch with LED, Switch with LED, with LED, LED

Google Docs
Google Drive
Download [pdf]
Download Optimized

File Info : application/pdf, 1 Pages, 664.38KB

DualSwitch with LED WiringDiagram Adobe PDF library 17.00 Adobe Illustrator 29.2 (Macintosh)

Related Documents

	Single Switch with LED Wiring Diagram - Romain Pickups Detailed wiring diagram and enclosure layout for a single-switch guitar pedal featuring a 3PDT footswitch, LED, 3.3k resistor, and mono output jack, housed in a Hammond 1590LB enclosure by Romain Pickups.
	Pedalboard In/Out Module: Hammond 1590A Enclosure with 4x Switchcraft Mono Output Jacks This document provides a detailed overview and wiring diagram for a pedalboard in/out module. It features a Hammond 1590A enclosure equipped with four Switchcraft mono output jacks, illustrating both top and bottom views with internal connections.
	FiftyNiner Modern Wiring Diagram - Romain Pickups Detailed wiring diagram for the Romain Pickups FiftyNiner, featuring single-conductor braided pushback, a 3-way toggle switch, and dual volume/tone controls.
	Five/Series - "McCarty" Wiring Diagram Wiring diagram for the Five/Series "McCarty" guitar pickup system, featuring 4-conductor wire, a 3-way toggle switch, 1 volume control, and 1 push-pull tone control.
	FiftyNiner 50's Wiring Diagram - Romain Pickups Detailed wiring diagram for the FiftyNiner guitar pickup system using single-conductor braided pushback wire, a 3-way toggle switch, two volume controls, and two tone controls, as specified by Romain Pickups.
	Romain Pickups Five/Series Singlecut Wiring Diagram Detailed wiring diagram for Romain Pickups Five/Series singlecut guitars, featuring 4-conductor wire, a 3-way toggle switch, two volume controls, and two CTS push-pull tone controls.