ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Pedalboard In/Out Module

Hammond 1590A Enclosure

4x Switchcraft Mono Output Jacks

Top View

A black Hammond 1590A enclosure is shown from the top. The enclosure features the label "IN / OUT MODULE". Three mono output jacks are visible on the front face. A fourth mono output jack is located on the rear face, making a total of four mono output jacks.

Bottom View and Wiring

The bottom view of the Hammond 1590A enclosure reveals the internal wiring of the four mono output jacks. The diagram illustrates the connections for two pairs of jacks. A red wire connects the "TIP" terminal of one jack to the "TIP" terminal of another jack. A black wire connects the "SLEEVE" terminal of one jack to the "SLEEVE" terminal of another jack. The terminals are clearly labeled as "TIP" and "SLEEVE".

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 1 Pages, 1.68MB

PedalBoard In-Out Module WiringDiagram Adobe PDF library 17.00 Adobe Illustrator(R) 24.0

Related Documents

	Dual Switch with LEDs Wiring Diagram - Romain Pickups A detailed wiring diagram for a dual footswitch pedal built in a Hammond 1590A enclosure, featuring LEDs, 3PDT latching footswitches, resistors, and a stereo output jack. Created by Romain Pickups.
	Single Switch with LED Wiring Diagram - Romain Pickups Detailed wiring diagram and enclosure layout for a single-switch guitar pedal featuring a 3PDT footswitch, LED, 3.3k resistor, and mono output jack, housed in a Hammond 1590LB enclosure by Romain Pickups.
	FiftyNiner Modern Wiring Diagram - Romain Pickups Detailed wiring diagram for the Romain Pickups FiftyNiner, featuring single-conductor braided pushback, a 3-way toggle switch, and dual volume/tone controls.
	Romain Pickups Five/Series Singlecut Wiring Diagram Detailed wiring diagram for Romain Pickups Five/Series singlecut guitars, featuring 4-conductor wire, a 3-way toggle switch, two volume controls, and two CTS push-pull tone controls.
	Five/Series - "McCarty" Wiring Diagram Wiring diagram for the Five/Series "McCarty" guitar pickup system, featuring 4-conductor wire, a 3-way toggle switch, 1 volume control, and 1 push-pull tone control.
	FiftyNiner 50's Wiring Diagram - Romain Pickups Detailed wiring diagram for the FiftyNiner guitar pickup system using single-conductor braided pushback wire, a 3-way toggle switch, two volume controls, and two tone controls, as specified by Romain Pickups.