ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Single Switch with LED

Hammond 1590LB Enclosure

3PDT Latching Footswitch + LED + 3.3k Resistor & Mono Output Jack

Top View

(Drill holes from Top)

The top of the enclosure shows two marked locations for drilling: a smaller hole labeled "LED HOLE" with a circular marker indicating the drill location, and a larger central hole labeled "FOOTSWITCH HOLE" with a cross marker indicating the drill location. An [up-arrow] points from the footswitch hole label.

Bottom View - Open

This view illustrates the internal wiring. A 3PDT latching footswitch is mounted. A blue LED is connected, with its anode wired through a 3.3k resistor (labeled R1-3.3K) before connecting to the footswitch. The cathode of the LED is connected to ground. A mono output jack is also shown, with its tip connected to one of the footswitch terminals and its sleeve connected to ground. Red and black wires indicate connections between components and terminals.

Assembled Single Switch

An image of the completed single switch pedal. It features a black enclosure with a silver footswitch and a blue LED indicator light.

Romain PICKUPS

Models: 1590LB Single Switch WIth LED LED Night Light, 1590LB, Single Switch WIth LED LED Night Light, LED LED Night Light, LED Night Light, Night Light

Google Docs
Google Drive
Download [pdf]
Download Optimized

File Info : application/pdf, 1 Pages, 667.16KB

SingleSwitch with LED WiringDiagram Adobe PDF library 17.00 Adobe Illustrator 29.2 (Macintosh)

Related Documents

	Dual Switch with LEDs Wiring Diagram - Romain Pickups A detailed wiring diagram for a dual footswitch pedal built in a Hammond 1590A enclosure, featuring LEDs, 3PDT latching footswitches, resistors, and a stereo output jack. Created by Romain Pickups.
	Pedalboard In/Out Module: Hammond 1590A Enclosure with 4x Switchcraft Mono Output Jacks This document provides a detailed overview and wiring diagram for a pedalboard in/out module. It features a Hammond 1590A enclosure equipped with four Switchcraft mono output jacks, illustrating both top and bottom views with internal connections.
	FiftyNiner Modern Wiring Diagram - Romain Pickups Detailed wiring diagram for the Romain Pickups FiftyNiner, featuring single-conductor braided pushback, a 3-way toggle switch, and dual volume/tone controls.
	FiftyNiner 50's Wiring Diagram - Romain Pickups Detailed wiring diagram for the FiftyNiner guitar pickup system using single-conductor braided pushback wire, a 3-way toggle switch, two volume controls, and two tone controls, as specified by Romain Pickups.
	Five/Series - "McCarty" Wiring Diagram Wiring diagram for the Five/Series "McCarty" guitar pickup system, featuring 4-conductor wire, a 3-way toggle switch, 1 volume control, and 1 push-pull tone control.
	Romain Pickups Five/Series Singlecut Wiring Diagram Detailed wiring diagram for Romain Pickups Five/Series singlecut guitars, featuring 4-conductor wire, a 3-way toggle switch, two volume controls, and two CTS push-pull tone controls.