Hoover PowerScrub™ XL Carpet & Upholstery Cleaner
Quick Start Guide
Getting Started
Step 1: Attach Handle.
Step 2: Fill Tank.
Fill Tank with Water up to MAX line located on side of the tank. Follow steps on solution bottle to add the appropriate amount of solution to tank.
How to Use: Main Unit
Step 1: Operate.
Use pedals to operate. The unit has an On/Off switch and a Recline lever.
Step 2: Wash and Dry.
Slowly push forward and squeeze trigger to wash. Release trigger and slowly pull unit back to dry carpet. Repeat and move to new section.
How to Use: Above Floor
Step 1: Hose Attachment.
Step 2: Tool Attachment.
Step 3: Spray / Scrub.
How to Use: Cleaning and Maintaining
Step 1: Remove Dirty Water Tank.
Step 2: Pull to Remove Nozzle Cover.
Step 3: Remove Brushes.
To Remove Brushes, press both tabs on side of foot. To Reinsert Brushes push them back in place until you hear a click.
Step 4: Reinsert Brushes.
Reinsert Brushes and Press Firmly until Latches Lock.
How to Use: Quick Clean Mode*
*Available for select models only.
Step 1: Engage Mode.
To Engage Quick Clean Mode, Turn Knob Counter-Clockwise until engaged. Return to Deep Clean Mode by Turning knob Clockwise to Starting Position.
For Frequently Asked Questions and to Register your new product, scan here!
