Anker PowerCore Slim 10000
USER MANUAL
Charge Your Phone or Tablet
Connect your phone or tablet to the USB-A port on the PowerCore Slim 10000 using your device's charging cable.
Charge Your Bluetooth Earphones or Smart Watches
Enter "trickle-charging" mode for devices recommended for smart watches or Bluetooth earphones.
To enter trickle-charging mode: Press the power button twice, or press and hold for 2 seconds. The LED indicator will turn green. ?
To exit trickle-charging mode: Press the power button once again.
Recharge Your PowerCore
Connect a USB-C cable or a micro USB cable to the respective input port on the PowerCore to recharge it.
Important: Use only one input port at a time.
The USB-C port is for input only.
Specifications
- Cell Capacity: 10,000mAh / 37Wh
- Input: 5V ⎓ 2A
- Output: 5V ⎓ 2.4A
- Size: 149.5 x 68.5 x 14.9 mm
- Weight: 236 g
Important Safety Instructions
When using this product, basic precautions should always be followed:
- Store product in a cool and dry place.
- Do not store the product in hot or humid environments.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 32°F to 104°F / 0°C to 40°C.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, charge and discharge it once every three months.
- When charging a device, the product may feel warm; this is a normal operating condition and should not be cause for concern.
- In normal conditions, battery performance will decline over several years.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
Additional safety notes:
- Do not disassemble, open, crush, or puncture the power bank.
- Do not expose the power bank to heat sources or fire, or dispose of it in fire. Avoid storage in direct sunlight.
- Do not short-circuit the power bank. Avoid placing multiple power banks in drawers where they might short-circuit each other or be short-circuited by other metal objects.
- Do not subject the power bank to mechanical shock.
- If leakage occurs, do not allow the leaked liquid to come into contact with skin or eyes. If contact occurs, flush the affected area with plenty of water.
- Charge according to the manufacturer's instructions.
- Pay attention to the markings on the power bank to ensure correct usage.
- Keep the power bank clean and dry.
- Do not overcharge the power bank for extended periods.
- Keep the original product manual for future reference.
- Dispose of used power banks according to national environmental regulations.
- Lithium battery safety: Do not expose batteries to high heat such as sunlight or fire. Replacement with an incorrect type may result in an explosion. Replace only with the same or equivalent type.
Recycling Information: This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. ♻️
Declarations and Compliance
Declaration of Conformity: Anker Innovations Limited declares that the product type A1229 is in compliance with Directive 2014/30/EU, 2011/65/EU, and 2001/95/EC. The full text of the EU declaration of conformity is available at: https://www.anker.com
GB Declaration of Conformity: Anker Innovations Limited declares that the product type A1229 is in compliance with Electromagnetic Compatibility Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at: https://www.anker.com
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.
IC Statement: This device complies with Industry Canada license ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Customer Service
For FAQs and more information, please visit: anker.com/support
Email: support@anker.com
Phone Support:
- (US): +1 (800) 988 7973
- (UK): +44 (0) 1604 936200
- (DE): +49 (0) 69 9579 7960
- (JP): 034455 7823
- (CN): +86 400 0550 036
Warranty and Support
18-month limited warranty*
*Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
Lifetime technical support
