Anker PowerCore Slim 10000 User Guide and Safety Information

Important Safety Instructions

When using this product, basic precautions should always be followed:

• Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or personal injury.
• Operating temperature should be between 0°C to 35°C / 32°F to 95°F.
• Do not disassemble this product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or personal injury.
• CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not expose power bank to rain or snow.
• Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause explosion.
• Switch off the power bank when not in use.
• CAUTION: Risk of Fire and Burns. Do Not Open, Crush or Incinerate. Follow Manufacturer's Instructions.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party (for FCC matters only):

Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973

IC Statement

This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/35/EU, 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Responsible parties for EU and UK matters:

• Anker Innovations Deutschland GmbH
  Georg-Muche-Strasse 3, 80807 Munich, Germany
• Anker Technology (UK) Ltd
  GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

Support Information

For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com