Lenovo L22e-40 Monitor: Quick Start Guide

Assembly and Setup Instructions

Follow these visual steps to assemble and connect your monitor:

1. Step 1: Unpack and Identify Components

   Carefully unpack the monitor and accessories. Identify the monitor panel, stand base, stand neck, power cable, and video cable (e.g., HDMI).

2. Step 2: Assemble the Monitor Stand

   Connect the stand neck to the stand base. Align and secure them together, typically using a built-in locking mechanism or screw.

3. Step 3: Attach Monitor to Stand

   Align the assembled stand with the mounting points on the rear of the monitor panel. Secure the stand to the monitor firmly.

4. Step 4: Connect Video and Power Cables

   Connect the video cable (HDMI or VGA) from your computer's video output to the corresponding port on the monitor. Connect the power cable to the monitor and then to a power outlet.

   Available Ports: The monitor features HDMI and VGA input ports.

5. Step 5: Power On

   Press the power button on the monitor to turn it on. Your computer should automatically detect the new display.

6. Step 6: Identify Rear Ports

   Familiarize yourself with the monitor's rear input ports: Power In, HDMI, VGA, and Audio Out.

7. Step 7: Connect Video Input

   Connect your computer's video output to the monitor's HDMI or VGA port using the appropriate cable.

8. Step 8: Connect Power Input

   Connect the power cable to the monitor's power input port and plug the other end into a grounded wall outlet.

9. Step 9: Connect Audio Devices

   If desired, connect external speakers or headphones to the monitor's audio output port.

10. Step 10: Secure Connections

    Ensure all cables (power, video, audio) are securely connected to both the monitor and their respective sources.

11. Step 11: Cable Management

    Organize and route cables neatly using the provided clips or channels on the stand for a tidy setup.

12. Step 12: Power Button and OSD Menu

    Locate the power button (often a joystick or single button). Press it to power the monitor on or off. Use the controls to access and navigate the On-Screen Display (OSD) menu for adjusting settings.

13. Step 13: Information Access

    The information icon (ℹ️) indicates where to find additional details or access system information.

Stand Angle/Tilt Warning: Ensure the monitor stand is within the safe tilt range (0-5 degrees) to prevent damage or instability. Avoid angles exceeding 5 degrees.

Important Information and Compliance

Driver and Software Downloads:

The latest drivers, software, documentation, and warranty information for this monitor can be downloaded from the official Lenovo support website: https://pcsupport.lenovo.com/solutions/l22e_40

Safety Precautions:

• ⚠️ Electrical Shock Hazard: Do not remove covers. Ensure the stand is attached before operation. Do not connect or disconnect during electrical storms. The power cord plug must be connected to a properly wired and grounded power outlet. Any connected equipment must also use properly wired and grounded outlets. To isolate the monitor, remove the plug from the power outlet, which should be easily accessible.
• Handling: For monitors weighing more than 18 kg (39.68 lb), it is recommended that two people handle the lifting and moving.

Electrical Installation Requirements:

Please confirm that the building's distribution system provides a circuit breaker rated for 120/240V, 20A (maximum).

Recycling and Environmental Information:

Important information regarding battery recycling and Waste Electrical and Electronic Equipment (WEEE) can be found in the Compliance Guide that came with your product or by visiting https://www.lenovo.com/recycling.

Regulatory Compliance:

• This device complies with Part 15 of the FCC Rules.
• EPREL Registration Number: 1402716
• RoHS Compliance (China): The table below indicates the presence of hazardous substances in components, as per Chinese regulations (SJ/T11364).

*Circuit board components include printed circuit boards and their constituent parts, such as resistors, capacitors, integrated circuits, connectors, etc.

Legend:

• ⭕: The content of this hazardous substance in all homogeneous materials of this part is below the limit requirement specified in GB/T 26572.
• ❌: The content of this hazardous substance in at least one homogeneous material of this part exceeds the limit requirement specified in GB/T 26572.

Note: Parts marked with '×' are due to global technological development limitations that prevent the substitution of hazardous substances.

Product Features

Supported Software: The L22e-40 monitor supports Lenovo Accessories and Display Manager (formerly Lenovo Display Control Center).