Onforu SK01 Wireless Speaker

Safety Instructions

1. Read all instructions and save them for future reference.
2. Do not place naked flame sources near the product.
3. The product contains a battery pack and should not be exposed to excessive heat.
4. Do not hit the product seriously to avoid damaging it.
5. Clean with a dry cloth only.
6. Only use attachments/accessories specified by the manufacturer.
7. Do not place products on an unstable surface.
8. Do not block or cover ventilation slots.
9. Prevent power cord hazards. Route cords to prevent stepping on or pinching them.
10. Unplug this apparatus during lightning storms or when unused for long periods.
11. Do not set up near heat sources.
12. Do not make unauthorized alterations to the product.
13. Do not get close to magnetic fields or electric fields.
14. The maximum ambient temperature during use must not exceed 35°C.
15. Suitable for safe use in tropical and non-tropical areas.
16. Only suitable for safe use in areas below 2000m above sea level.
17. Please use a 5V adapter for charging.

Specifications

Dimensions

Components and Structure

The product includes: 2 Speakers, 1 User Manual, 1 USB Cable (0.6m), 1 AUX Cable (1m).

Product Description:

• LIGHT MODE Button: Controls light brightness and mode selection.
• BASS Button: Selects sound effect modes (Normal, BASS, Outdoor).
• Bluetooth Button: Switches to Bluetooth mode, disconnects current Bluetooth connection.
• TWS Button: Used for True Wireless Stereo pairing.
• Volume Up/Next Button: Increases volume or skips to the next track.
• Power On/Off Button: Turns the speaker on or off.
• Volume Down/Previous Button: Decreases volume or goes to the previous track.
• Charging Port: USB, AUX, DC 5V inputs.
• Can Charge Other Devices (5V 2A): A USB port to charge external devices.
• Aux Input Mode: Connects to non-Bluetooth devices via a 3.5mm audio cable.

Button Instructions

TWS Pairing

1. Switch on both speakers simultaneously. They will pair and connect. A "TWS Mode" voice prompt indicates successful connection.
2. One speaker's blue light will flash, while the other's remains solid blue after connecting to the phone.
3. To disconnect from the phone, press any "*" button. To re-initiate TWS pairing, press and hold the "*" button on any speaker for 3 seconds.

Note: The optimal distance between speakers for TWS pairing is 5-8 meters.

Bluetooth Mode

1. Turn on the speaker by holding the power button. It defaults to Bluetooth mode with a flashing blue indicator light.
2. Pair your device by turning on its Bluetooth, searching for "A SPEAKER10", and selecting it. A beep and solid blue light indicate successful pairing.
3. To connect a different device, long press the Bluetooth button for 2 seconds to disconnect the current connection, then repeat step 2.

Notes:

• The speaker automatically searches for recently connected devices.
• Bluetooth has an effective range of 15 meters; use within 5 meters for a stable connection.
• The speaker turns off automatically after 30 minutes of no Bluetooth connection or music playback.

AUX Input Mode

Connect non-Bluetooth devices using a 3.5mm audio cable. The speaker defaults to audio mode; short press the "*" button to switch to Bluetooth mode.

USB Charging

Speaker Charging

When the battery is low, the speaker will prompt "ding ding" three times before automatically shutting off. Charge using the supplied USB cable and a 5V adapter. A red indicator light shows charging; it turns off when fully charged.

Charge Other Devices

Connect your device to the USB port using the USB cable to charge it (5V 2A output).

Solutions to Common Problems

Environmental Information

This symbol ♻️ means the product must not be discarded as household waste. Deliver it to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal helps prevent negative consequences for the environment and human health.

Compliance and Manufacturer Information

FCC ID: 2BM4TASPEAKER10A

FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. If interference occurs, try reorienting the antenna, increasing separation, connecting to a different outlet, or consulting a dealer/technician.

Radiation Exposure Statement: The device meets general RF exposure requirements and can be used in portable exposure conditions without restriction.

Manufacturer: HK Bright International Lighting Co., Limited, Unit 616, 6/F., Kam Teem Industrial Building, 135 Connaught Road West, Sai Wan Hong Kong

Manufacturer: MDH LIGHTING LTD, Suite 302, 292 Strovolos Avenue, 2048 Strovolos Nicosia, Cyprus

UK Importer: MDH LIGHTING LTD, 69 Aberdeen Avenue, Cambridge CB2 8DL, United Kingdom

Made in China

Support: support@onforuled.com | www.onforuleds.com